T型薄壁管节点应力集中系数有限元分析

通过有限元的方法,分析了T型薄壁管节点受平面内弯矩作用下的疲劳行为,得到了应力最大值的位置和拟合出用于预测T型薄壁管节点受平面内弯矩作用下的应力集中系数的参数公式。     

横向光泵获得S_2紫外激光

用ＸｅＣｌ准分于激光器（３０８．１ｎｍ）横向泵浦Ｓ２激光器，又成功地实现了Ｓ２Ｂ－Ｘ态近ＵＶ波段的激光振荡。在波长３３０．９～３９０．０ｎｍ范围内观测到６条近ＵＶ激光输出。测量了有关的激光参数。     

轴向柱塞泵配流副油膜的实验研究

本文介绍了对６３ＣＹ１４－ＩＢ型轴向柱塞泵配流副油膜的实验研究结果。该研究结果为改进该泵配流副的性能提供了依据。     

森兰变频器在循环水供水系统中的应用

介绍森兰变频器在循环水供水系统中的应用,实现了能耗的节约以及故障的自动切换。     

乳化液泵站变频调速系统的设计

针对传统的乳化液泵站调速系统存在机械损耗比较大的问题,提出了一种乳化液泵站变频调速系统的设计方案;给出了该系统的硬件结构,详细介绍了该系统的工作模式及软件设计。实际应用表明,该系统运行稳定、机械损耗小。     

Soft computing approach to fault diagnosis of centrifugal pump

Fault detection and isolation in rotating machinery is very important from an industrial viewpoint as it can help in maintenance activities and significantly reduce the down-time of the machine, resulting in major cost savings. Traditional methods have been found to be not very accurate. Soft computing based methods are now being increasingly employed for the purpose. The proposed method is based on a genetic programming technique which is known as gene expression programming (GEP). GEP is somewhat a new member of the genetic programming family. The main objective of this paper is to compare the classification accuracy of the proposed evolutionary computing based method with other pattern classification approaches such as support vector machine (SVM), Wavelet-GEP, and proximal support vector machine (PSVM). For this purpose, six states viz., normal, bearing fault, impeller fault, seal fault, impeller and bearing fault together, cavitation are simulated on centrifugal pump. Decision tree algorithm is used to select the features. The results obtained using GEP is compared with the performance of Wavelet-GEP, support vector machine (SVM) and proximal support vector machine (PSVM) based classifiers. It is observed that both GEP and SVM equally outperform the other two classifiers (PSVM and Wavelet-GEP) considered in the present study.     

CO2/H2S对油气管材的腐蚀规律

本文综述了CO2、H2S对油气管材的腐蚀机理及影响因素,提出了开发经济型油管的设想.     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

黄金峡水利枢纽工程大型水泵机组选型设计及运行调节研究

引汉济渭工程黄金峡水利枢纽是陕西省境内一项重要的大型跨流域调水工程,泵站装机容量和设计流量均为目前国内甚至亚洲在建和已建泵站之最,且调水过程复杂、调水流量分布范围宽广。在分析黄金峡泵站调度原则及运行方式的基础上,综合比较目前国内外大型泵站机组设计制造水平、枢纽建筑物及机电设备投资等因素,详细论证了大型单级单吸离心式水泵机组台数和性能参数的确定方法及其影响因素,并给出了黄金峡泵站机组选型设计的最优方案,同时论证了采用变频调节的必要性及其效果。研究结果可为大型调水泵站机组的选型设计提供参考。