中国大陆PCB产业自动化的现况与未来

从中国大陆PCB发展的现况分析实行设备自动化连线为企业所创造的价值。设备自动化连线是中国大陆PCB必须面临的改革出路。     

集输系统热回水管线腐蚀分析

中国石油天然气股份有限公司华北分公司第三采油厂油气集输系统热回水管线普遍存在着腐蚀问题,影响原油生产和集输的正常运行。介绍了腐蚀较严重的13个站点的水质普查、水质结垢倾向和腐蚀性情况,并在水质分析的基础上进行了热水管线腐蚀因素的试验研究,确定腐蚀主要因素为水中的溶解氧含量高,从而造成腐蚀。     

Characterisation of interfaces in nanocrystalline palladium

Structures of grain boundaries and triple line junctions in nanocrystalline materials are of interest owing to large fractions of atoms in nanocrystalline materials being at these interfacial positions. Grain boundary and triple line junction structures in nanocrystalline palladium have been studied using high-resolution transmission electron microscopy (HRTEM). The main micro structural features observed include the varying atomic structures of grain boundaries and the presence of disordered regions at triple line junctions. Also, there is variation in lattice parameters in different nanocrystalline grains. Geometric phase analysis is used to quantify atomic displacements within nanocrystalline grains. Displacement fields thus detected indicate links to the interface structures.     

基于光纤环的光缓存器

提出了一种基于光纤环的光缓存器的结构,对结合半导体光放大器作光开关的此结构的物理模型进行了详细描述,并根据此模型分析了其增益、噪声、信噪比等方面的特性.     

欧洲主要电信运营商专线资费的演变

欧洲主要电信运营商所处国度的经济和人口布局情况不同，竞争环境也有差别，在专线资费方面的做法也有许多不同之处。考虑到地区之间竞争的差异。目前多数国家都取消了地区交叉补贴的做法，但还有一部分国家仍然坚持统一费率。在资费方面的基本促销手段为接合同年限和用户的支出额打折。从2000年到2003年资费演变的基本情况是；接入费扣2Mbit／s以下较低速率的专线租费保持平稳略有下降，较高速率专线的租费则有较大的下调幅虚。     

大型连杆流线简易试验方法

介绍了一种大型连杆流线的简易试验方法及其评价原则。该方法可清晰显示流线，并适合任何尺寸和形状的锻造连杆的流线试验。     

基于遗传算法的服装工序编排规划

本文讨论了建立服装工序编排系统的必要性，在进行服装工序拆分、合并的基础上，应用遗传算法建立了以流水线平衡为目标的服装工序编排模型．     

微带型Wilkinson功分器设计与实现

小型低功耗器件是射频电路设计的研究热点,而微带技术具有小型化低功耗的优点,为此在介绍微带型Wilkin-son功分器工作原理的基础上,使用基于矩量法的ADS软件设计、仿真和优化计算相关数据参数,并制作了一个微带功分器实例,最后对加工的样品进行实测,获得与仿真值吻合较好的预期结果。     

SAW软扩频调制解调器的研究

报道了一种直接序列软扩频调制解调器的SAW实现方案，并给出了相应的实验结果。该方案对提高系统抗干扰能力、频宽利用等方面均具有与其他技术不同的特点。同时，该技术方案为进一步研究DS-OFDM打下了基础。     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.