GICL型鼓形齿联轴器的研制

分析了国内外鼓形齿式联轴器技术的发展和特点，介绍了GICL型鼓形齿式联轴器的研制过程。     

含小水电分布式电源的配网线路串联补偿优化

以小水电接入电网为例进行分析研究,深入分析小水电给电网带来的不利影响,重点分析对变压器损耗和线路损耗这两方面的影响。最后,举例某地区小水电接入配电网进行分析研究,对丰水期的小水电加入串联补偿装置后线路电压的变化情况展开研究。     

无功补偿技术在智能电网中的应用

无功补偿技术是一项提高电网的功率因数,降低供电变压器及输送电路损耗,从而改善供电环境的技术,其在如今的电力供电系统中占据着重要的位置。本文主要针对无功率补偿技术的应用特点与基本原理进行分析,并分析其在智能电网中的应用。     

Tool deflection compensation in peripheral milling of curved geometries

This paper presents compensation of surface error due to cutting force-induced tool deflections in a peripheral milling process. Previous research attempts on this topic deal with error compensation in machining of straight geometries only. This paper is concerned with peripheral milling of variable curvature geometries where the workpiece curvature changes continuously along the path of cut. In the case of curved geometries, both process geometry and the cutting forces have shown to have strong dependence on workpiece curvature and hence variation of surface error along the path of cut. This calls for a different error compensation strategy than the one which is normally used for machining straight geometries. The present work is an attempt to improve accuracy in machining of curved geometries by use of CNC tool path compensation. Mechanistic model for cutting force estimation and cantilever beam model for cutter deflection estimation are used. The results based on machining experiments performed on a variety of geometries show that the dimensional accuracy can be improved significantly in peripheral milling of curved geometries.     

Langmuir probe RF plasma compensation using a simulation method

The problem of Langmuir probe data deformation due to RF pickup by the probe is treated through a computer simulation method. It is pointed out that proper RF compensations can be obtained by treatment of the Langmuir probe raw data through the use of computer software. It is demonstrated that correct, RF unaffected probe I–V$I\text{–}V$ characteristics can be accurately reproduced from the RF contaminated data. This eliminates the need for the use of any filters or other hardware procedures. User friendly matlab based software is presented. The software automatically retrieves the correct RF I–V$I\text{–}V$ characteristics for single Langmuir probe data which consequently allows for proper evaluation of plasma parameters such as the plasma electron temperature, electron number density and the electron energy distribution function (EEDF)     

Fall detection for multiple pedestrians using depth image processing technique

A fall detection method based on depth image analysis is proposed in this paper. As different from the conventional methods, if the pedestrians are partially overlapped or partially occluded, the proposed method is still able to detect fall events and has the following advantages: (1) single or multiple pedestrian detection; (2) recognition of human and non-human objects; (3) compensation for illumination, which is applicable in scenarios using indoor light sources of different colors; (4) using the central line of a human silhouette to obtain the pedestrian tilt angle; and (5) avoiding misrecognition of a squat or stoop as a fall. According to the experimental results, the precision of the proposed fall detection method is 94.31% and the recall is 85.57%. The proposed method is verified to be robust and specifically suitable for applying in family homes, corridors and other public places.     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.     

Dynamic compensation by fusing a high-speed actuator and high-speed visual feedback with its application to fast peg-and-hole alignment

This paper presents a dynamic compensation concept to grapple with the dynamic defects of a traditional robot arm, especially while performing high-speed endpoint regulations. The proposed high-speed dynamic compensation concept offers a new point of view for cooperating with a traditional manipulator to realize highly dexterous performance of manipulations. The concept is realized through adoption of a high-speed light-weight actuator as well as endpoint closed loop configured high-speed cameras. The dynamic compensation is analyzed experimentally with 1000 Hz visual feedback and a high-speed finger for a robot arm in the case of one degree of freedom. The advantage of the proposed approach is that the modeling for the robot system’s dynamics is not needed, whereas it is necessary and trivial in order to realize high-speed regulations by traditional approaches. Thus, the control issue becomes easier with the proposed approach. As an application for this concept, fast peg-and-hole alignment with large position and attitude uncertainty is studied. The alignment algorithm is based on a visual compliance strategy. Alignment experiments show that with the proposed concept of dynamic compensation as well as visual compliant motion control, robust and fast convergence was realized for most cases.     

面向ZigBee的视频多描述编码及其传输性能仿真

针对视频码流在ZigBee等不可靠低速无线网络传输时易发生编码信息包丢失而导致接收端无法正确解码这一问题,提出一种基于3D-SPIHT视频多描述编码方案。与传统多描述编码如MDSQ相比,该方案创建的各描述质量平衡,并能通过去除视频帧间冗余来提高压缩比;与国际标准（H.264等）相比,该方案具有算法简单、能够在任意码流截断处解码、码率可连续分级和无明显块效应等优点。实验表明,该编码方案能够较好地应用于ZigBee多信道网络,并在较大压缩比的情况下仍能获取质量较好的重建图像,具有较高的应用价值。     

基于Kalman滤波的谐波电流实时检测仿真分析

谐波电流的实时检测是有源电力滤波器实现的关键,数字化的实现引入了一定的时间延迟,影响了其滤波效果。将三相谐波电流进行Clark坐标变换到两相正交坐标系中,利用Kalman算法对系统进行建模,检测出各次谐波电流的幅值和相角。通过选取合理的Kalman状态变量,运用简单的代数运算向模型中增加了一个相位补偿角,来消除延时的影响。最后,利用Matlab进行仿真实验,验证了该方法的有效性和正确性。