Hydrodynamics of disturbed flow and erosion—corrosion. Part I — Single-phase flow study

Numerical simulations of turbulent flow have been used to determine the flow structure in a sudden pipe expansion, in order to explain the effects of disturbed flow on mass transfer controlled erosion–corrosion. Previously determined rates of mass transfer through the liquid boundary layer have been directly related to the predicted levels of near-wall turbulence. When rust films are present, the turbulent fluctuations affect both the mass transfer through the boundary layer and the removal of the film. The determining resistance to mass transfer, under the conditions examined, was that of the rust film.     

Exploring single electrode reactions in polymer electrolyte fuel cells

Utilising a pseudo-reference electrode in polymer electrolyte fuel cells allows for the separation of anodic and cathodic contributions to the entire cell impedance. Modelling the impedance responses by using equivalent circuits inhibits the investigation of kinetic parameters of the basic electrochemical reactions, which take place at single electrode-electrolyte interfaces. Therefore, we evaluate single electrode impedance measurements by a kinetic model, which is based on specific reaction pathways, either for the oxygen reduction reaction (ORR) or the hydrogen oxidation reaction (HOR). As a consequence, it is possible to obtain kinetic parameters for the specific reaction of interest. Furthermore, the information gained from the single electrode impedance measurements and the kinetic model can give insight into single reactions steps. In particular, the ORR has to include a chemical step in the reaction pathway.     

喷动床反应模型的研究进展

喷动床是一种可实现热量重复循环的高效反应器 .介绍了目前喷动床研究中出现的各种反应模型 ,从等温和非等温两个方面讨论了一维轴向、流管、半分割和流动反应耦合等各类模型的基本思想和理论及各自的特点 ,并提出了进一步发展的方向 .     

Prediction model of compressive strength development of fly-ash concrete

Based on experimental results concerning the compressive strength development of concrete containing fly ash, the authors derived an estimation equation for compressive strength development. The equation can express coefficient , which indicates the activity of fly ash as a binder, in the form of a function of age, fly-ash content, and Blaine specific surface area of fly ash.

This equation is capable of explaining the increases in the early strength due to fly ash in place of part of fine aggregate, the decreases in the early strength due to fly ash in place of part of cement, the increases in the long-term strength due to pozzolanic reaction, the relationship between the fly-ash replacement ratio and the ratio of strength increase/decrease, and the effect of fly ash's Blaine specific surface area on the strength.     

Modelling the effects of human papillomavirus in cervical cells

Worldwide, cervical cancer is the second most common cancer in women, after breast cancer. The prevalence of this malignant disease is estimated at 1.4 million cases worldwide, causing about 290,000 deaths and 500,000 new cases per year, of which 80% correspond to women living in developing countries. In this work we propose a family of ordered models for basal cells of the cervix corresponding to different stages ranging from normal cells to the formation of precancerous lesions. We analyse the first member of the family analytically and for the second member we developed a non-standard numerical method in order to extract some biological information.     

Stability analysis and controller synthesis for discrete uncertain singular fuzzy systems with distinct difference matrices in the rules

This paper mainly studies an extended discrete singular fuzzy model incorporating the multiple difference matrices in the rules and discusses its stability and design issues. By embracing additional algebraic constraint, traditional discrete Takagi-Sugeno (T-S) fuzzy model can be extended to a generalised discrete singular Takagi-Sugeno (GDST-S) model with individual difference matrices E_i in the locally singular models, where it can describe a larger class of physical or non-linear systems. Based on the linear matrix inequality (LMI) approach, we focus on deriving some explicit stability and design criteria expressed by the LMIs for the regarded system. Thus, the stability verification and controller synthesis can be performed by the current LMI tools. Finally, some illustrative examples are given to illustrate the effectiveness and validity of the proposed approach.     

Critical evaluation of coupling particle size distribution with the shrinking core model

The shrinking core model (SCM) is widely used to model fluid-solid reactions such as the leaching of metals from minerals. In most cases, however, the particle size distribution (PSD) of the solid material was disregarded. In this paper the erroneous shift in the control regime when neglecting PSD was quantified and the dependence of the shift on the coefficients of variation (CV) and the type of PSD was analysed. By coupling the SCM with a Gamma PSD, it was found that neglecting the PSD would shift the control regime from chemical reaction to inert/ash layer diffusion, when the CV was between 0.7 and 1.2. For a system controlled by liquid film diffusion, neglect of the PSD, would shift the control regime to chemical reaction when CV is between 0.3 and 0.7 or to inert/ash layer diffusion when CV is greater (0.9-1.5). It was therefore postulated that some researchers had unknowingly made invalid conclusions about the control regime due to the neglect of PSD. However, an inert/ash layer diffusion-controlled process was insensitive to the neglect of PSD. When CV<0.3, neglect of the PSD would not cause any erroneous shifts, irrespective of the control regime. Experimental data confirmed the observation. For a given CV, the deviation in the fraction reacted from the mono-PSD increases with CV and decreases with time. The maximum deviation, which occurs at the beginning, is about 10% with a gamma PSD of CV=0.3. The percent deviation is dependent of the type of PSDs. Gamma PSD gives the lowest deviation while Gaudin-Schuhmann results in the largest deviation (maxi. ∼19%, with CV=0.3) in the first half of dissolution process. Log-normal distribution gives a larger deviation than gamma but quickly approaches the latter with time. The deviation for Rosin-Rammler is between log-normal and Gaudin-Schuhmann. For systems with CV less than 0.3, the SCM can be fairly used without considering PSD. When CV is greater than 0.3, particularly in the early stage of a dissolution process with a PSD other than gamma, PSD should be included to avoid substantial errors.     

塑料充模流动粘性模型研究

对多种塑料在不同温度下的剪切速率一稳态剪切粘度数据进行Cross粘性模型参数拟合，得到了表征材料粘度的模型参数(B，Tb，τ^*，n)。其拟合效果良好，能较准确地描述塑料熔体在一定剪切速率和温度范围内的粘流特性，为工程计算和塑料熔体模流分析提供了数据支持。结果表明，该方法有较广泛的适用性。     

Model for drying during fluidized-bed combustion of wet low-rank coals

An unsteady state heat conduction model with a convective boundary condition is proposed for the drying of low-rank, high-porosity coals, such as lignites, during fluidized-bed combustion. The drying front is assumed to be the receding surface of a wet core. The solution technique for this moving boundary problem is based on the heat balance integral approach with immobilization of the moving boundary by a change in space variable. The governing cubic equation describing the drying curve in dimensionless form may be solved easily by the Newton—Raphson method. The model predictions are compared with experimental data for Mississippi lignite with excellent agreement. A correlation for estimation of total drying time is proposed. The temperature profiles obtained may be used for the study of the coupled drying and devolatilization in fluidized-bed combustors. The profiles could also be of importance in the study of formation of fissures/cracks in lignites subjected to intense heating conditions encountered during fluidized-bed combustion.