Argon I Lines Produced in a Hollow Cathode Source, 332 nm to 5865 nm

We report precision measurements by Fourier transform spectroscopy of the vacuum wavenumber, line width, and relative signal strength of 928 lines in the Ar I spectrum. Wavelength in air and classification of the transition are supplied for each line. A comparison of our results with other precision measurements illustrates the sensitivity of Ar I wavelengths to conditions in the light source.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

综合防渗技术在黄岗水库防渗加固工程中的应用

水库大坝综合防渗加固技术具有投资省、防渗墙体连接均匀完整可靠、防渗效果好、施工速度快等特点.通过黄岗水库的实践,为该项技术的推广提供了一个典型实例工程.     

活性碳和5A分子筛的吸附特性及其在真空获得中的作用

评述了活性碳和５Ａ分子筛的吸附等温线及其在真空佩温绝热夹层真空获得中的作用。分析了真空夹层抽真空除气时用Ｎ＿２气置换以及用“多次吸附－脱附Ｎ＿２气”方法活化吸附剂等先进工艺的机理。论述了根据吸附剂吸水的吸附等温线，合理确定活化工艺条件的方法。     

汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

高压条件下伴随化学反应两相流动的数值模拟

建立了高装填密度火药床在高压条件下的一维两相流体力学方程组，探讨了两相自由射流边界的处理方法，并对其进行了数值求解．揭示了对流燃烧过程的燃烧机理．数值结果与实验测得的压力曲线和火焰阵面曲线有较好的一致性     

温度,压力对漂移室气体增益的影响

研究了温度及气体压力对漂移室（工作于正比区）气体放大倍数的影响，温度和气体压力的变化范围分别是５￣４０℃及９０￣１０５ｋＰａ。用实验数据拟合得到了函数关系并测量了几种饱和度下函数中的参数值。     

给排水设备的电气控制安装与调试

针对2011年和2012年全国中职院校竞赛项目使用的《建筑设备给排水控制调试装置》设备,对其电气控制部分的安装调试过程进行分解。     

基于SOI的硅微谐振式压力传感器芯片制作

采用SOI硅片,基于MEMS技术,设计并加工了一种新型三明治结构的硅微谐振式压力传感器,根据传感器敏感单元的结构设计,制定了相应的制备工艺步骤,并且针对湿法深刻蚀过程中谐振子的刻蚀保护等问题,提出了一种基于氮化硅、氧化硅和氮化硅三层薄膜的保护工艺,实验表明,在采用三层薄膜保护工艺下进行湿法刻蚀10 h后,谐振子被完全释放,三层薄膜保护工艺对要求采用湿法刻蚀镂空释放可动结构具有较高的实用价值。最后对加工完成的谐振式压力传感器进行了初步的性能测试,结果表明,在标准大气压力下谐振子的固有频率为9.932 kHz,品质因数为34。     

An Operator-integration-factor splitting method for time-dependent problems: Application to incompressible fluid flow

In this paper we present a simple, general methodology for the generation of high-order operator decomposition (splitting) techniques for the solution of time-dependent problems arising in ordinary and partial differential equations. The new approach exploits operator integration factors to reduce multiple-operator equations to an associated series of single-operator initial-value subproblems. Two illustrations of the procedure are presented: the first, a second-order method in time applied to velocity-pressure decoupling in the incompressible Stokes problem; the second, a third-order method in time applied to convection-Stokes decoupling in the incompressible Navier-Stokes equations. Critical open questions are briefly described.