壳体理论在水压爆破中的应用

在壳体理论的基础上,考虑到薄壳型结构水压爆破的特点,提出了一种新的药量计算公式,并得到了初步实际工程验证.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.     

无差拍控制提高变速异步风力发电系统的故障承受能力

变速风力发电机对于电网扰动、故障以及电网电压跌落非常敏感，当上述情况发生时风力发电机将从电网切除，直到电网恢复正常才能重新投入运行。如何在电网发生扰动时保持风力发电机的正常运行是一个有挑战性的课题。未来的电网规范甚至要求在电网发生故障时风力机组仍能保持运行，这就要求必须安装保证风电机组低电压运行的控制装置。文中针对采用全载换流器与电网进行连接的异步风力发电机组提出了相应的风电机组低电压控制器及控制策略，无须进行硬件改造即可实现电网故障情况下风电机组不退出运行。其中，风电机组电气子系统控制器基于无差拍控制策略进行设计。算例给出了300 kW的风电机组在30%电压跌落情况下的暂态过程，没有加入控制器之前风电机组将停机，加入之后则可以保持运行，验证了所提方法的正确性。     

Necessary optimality conditions in a nonsmooth control problem with variable structure

An optimal control problem with nonsmooth performance criterion described by a system of ordinary differential equations is considered. Necessary first-order optimality conditions are obtained.     

2D Image Construction from Low Resolution Response of a New Non‐invasive Measurement for Medical Application

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two‐dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two‐dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home‐based medical care and other situations in which safety, simplicity, and economy are important.     

集团变分法(CVM)及其在合金相图计算中的应用

介绍了集团变分法的集团概率变量、配置熵等统计分析的理论基础及Helmholtz自由能的描述模型.提出了巨势及相对化学势的几何分析理论.讨论了应用集团变分法和巨势分析理论进行相平衡计算的过程,并分析了同结构平衡相图计算的若干实例.     

Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.