数字加速度传感器ADXL210在轨检仪中的应用

介绍了一种轨道检测仪及其重要传感器数字加速度传感器ADXL210的工作原理、功能、应用，并给出了ADXL210与MCS－51单片机的接口硬件电路和软件程序。     

On the Auditory Modality Superiority Effect in Serial Recall: Separating Input and Output Factors.

The modality effect in immediate recall refers to superior recall of the last few items within lists presented in spoken as opposed to printed form. The locus of this well-known effect has been unclear. N. Cowan, J. S. Saults, E. M. Elliott, and M. Moreno (2002) introduced a new method to distinguish between the effects of input serial position, output serial position, and the number of items yet to be recalled and found that large modality effects occurred only in conditions in which delay and interference at output (from items already recalled) was high. The authors replicated that finding, even when the response period included output interference acoustically similar to the spoken stimuli to be recalled. However, the authors found that output delay and interference act only by lowering the level of performance to a more sensitive range. The modality effect thus originates during encoding of the list to be recalled, not during output. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

论工艺参数对烧结产质量的影响及分析

本文论述了正确认识烧结工艺参数对搞好烧结生产的意义，介绍了烧结工艺参数其及相互关系，详述了烧结主要工艺参数对其产质量的影响，提出了烧结工艺参数认识的几点结论性意见。     

利用微机设计保护煤柱

根据保护煤柱设计原理 ,利用微机采用垂线法留设保护煤柱的数学模型、程序流程以及得到的算例结果。利用该方法 ,只要将有关资料输入计算机 ,就能快速准确地自动计算出煤柱角点坐标、煤柱面积和压煤量。     

一种解决COG图形型液晶显示模块竖条显示的方法

主要研究了COG图形型液晶显示模块的的深竖条显示问题,提出了一个如何提高IC驱动能力的方法。     

垂直定向液晶光阀及光电特性的研究

系统地讨论了排列相畸变模式液晶光阀结构，原理和制作，结合实际测试对其等效电路和电学匹配进行了分析，详细讨论了它的光电特性及相互关系，实测的液晶垂直排列方式工作的液晶光阀性能指标为，分辨率大于５０ｌｐ／ｍｍ，白光输入灵敏度为６．７７μＷ／ｃｍ＾２，响应时间为２００ｍｓ／３００ｍｓ，白光输出对比度为２００：１。     

Adaptive tracking control of manipulators: Theory and experiments

This paper considers the trajectory tracking problem for uncertain robot manipulators and proposes two adaptive controllers as solutions to this problem. The first controller is derived under the assumption that the manipulator state is measurable, while the second strategy is developed for those applications in which only position measurements are available. The adaptive schemes are very general and computationally efficient since they do not require knowledge of either the mathematical model or the parameter values of the manipulator dynamics, and are implemented without calculation of the robot inverse dynamics or inverse kinematic transformation. It is shown that the control strategies ensure uniform boundedness of all signals in the presence of bounded disturbances, and that the ultimate size of the tracking errors can be made arbitrarily small. Experimental results are presented for a PUMA 560 manipulator and demonstrate that accurate and robust trajectory tracking can be achieved by using the proposed controllers.     

电阻衰减匹配网络的设计计算法

声频系统,不管是播出系统还是节目制作系统,都是由为数不少的声频设备相互连接而成。设备之间的配置是否合理,直接影响节目制作的质量。由于现在我们使用的设备,规格繁多,性能各异,要把这些不同的输出阻抗和输入阻抗、相差甚远的输出电平和输入灵敏度合理地配接起来,既要使系统稳定可靠地输出,又要满足主要技术指标(频响、失真度和信噪比)的规定要求,级间的衰减、匹配是很重要的一环。     

Intelligent Control of Consolidation and Solidification Processes

Intelligent processing of materials (IPM) deals with the integration of process models and in situ sensors into an intelligent process controller to achieve desired material properties. IPM-based control systems recently have been developed for both consolidation and solidification processes. This article explores the application of models based on the finite- element method (FEM) to develop process actuation systems, to design process schedules and component shape, and to develop a control model with which to control the process. The results in this article were presented at the AeroMat ’93 Advanced Aerospace Materials/Processes Conference and Exposition, Anaheim, CA, 7–10 June 1993     

新器件条件下对行输出级电路计算公式的修正与补充(Ⅵ)

当彩色显示器使用初级线圈电感量L_P较小的新逆程变压器时,流过饱和导通行输出管的集电极电流I_(CP),不但包括偏转线圈L_Y中的正向锯齿波电流I_(YCP),还有不能忽略的FBT初级线圈中的正向锯齿电流I_(FCP),即CGA卡时峰值电流I_(CP)(6.1A)=I_(YCP)(3.9A)+I_(FCP)(2.2A)。因此有必要对行输出级电路的电流计算公式作相应的修正和补充。