地区电网新能源消纳困难时段研究

文章主要研究了某实际电网新能源消纳困难时段。通过负荷特性分析,得出地区电网低谷负荷出现季节和典型日负荷特性,通过风电场、光伏电站出力特性分析,得出风电、光伏季节分布特性及日出力特性。在地区电网新能源消纳的困难时段分析基础之上,对困难时段负荷概率进行统计,得出困难时段的负荷取值,为新能源接纳能力分析提供重要的数据支撑。     

利用贝叶斯线性回归结合混合Copula函数分析风电功率的相关性

分析风电场之间的出力相关性有助于合理规划风机的功率输送以及调度优化,从而提高传输线路的利用率。以冀北地区风场为例,首先分析了该区域风速的分布特性,然后利用贝叶斯线性回归算法建立混合Copula函数模型,拟合得到4个机群风速序列的联合分布,计算出风电场之间的出力相关性,并与其他相关性函数建模进行对比研究。研究结果表明,基于贝叶斯线性回归的混合Copula函数模型能够提高参数估计的精确性,从而使得计算出的相关性更为准确,并且由其拟合得到的出力概率分布与实际风场出力的概率分布较为一致。     

两坐标数控立式铣削欠切现象及其防止

在两坐标数控立铣削加工中,欠切是常见的异常加工现象,严重的影响了加工质量及加工效率。文中将欠切现象归纳为工艺系统引起的欠切、数控系统功能引起的欠切、工艺安排及编程引起的欠切三个大类,分析了十五种主要欠切形成的原因,并提出了控制欠切的措施。     

工艺设计文件输出管理数据库的开发

文章首先研究了工艺设计文件的数据库管理问题,设计开发了工艺文件输出管理数据库,创建了一套符合要求的工艺卡片模板,实现了工艺文件卡片的在线自动填写及输出,方便了用户的使用.     

Accu—Roll轧管机组主减速机输出轴联轴器大过盈量装配

介绍了采用油温加热装配工艺,实现Accu-Roll轧管机组主减速机输出轴联轴器大过盈量装配。     

CO2焊短路过程动特性与外特性的关系

CO2短路过渡焊在制造业上的应用非常广泛，对系统动特性有较高要求。该文结合电路理论和焊接短路过程的特点对过程动特性及其与外特性进行了细致的分析，突破了以往在外特性控制和动特性控制之间的关系上互不清楚、互不相关、相互分离的传统观念，认识到在CO2焊短路过渡过程中，动特性和外特性密切相关，既不能用外特性来解释动态过程；也不能认为动特性与外特性无关，动特性会受到外特性的制约，它们之间的关系可以用明确的数学语言进行分析，提出了动特性的最大响应能力及可控性的思想，分析结果有很大的理论意义。     

SELECTIVITY STUDIES IN THE PHOTOCHLORINATION OF METHANE II: EFFECT OF THE RADIATION SOURCE OUTPUT POWER AND OUTPUT SPECTRAL DISTRIBUTION

The effect of the output power and output spectral distribution of the radiation energy fed to a photoreactor upon the reaction yield and selectivities is studied both theoretically and experimentally. The study aims at the analysis of these influences in a series reaction such as the photochlorination of methane where methylene chloride and eventually chloroform are the most valuable products. The computational model employed has been verified for a group of selected conditions by means of bench-sale experiments.

It is found that the chlorine conversion shows the expected square root dependence with respect to the Local Volumetric Rate of Energy Absorption (LVREA). This dependence, in a first approximation, can also be assigned to the effect of the radiation source output power upon yield. It is also found that by manipulating the amount of radiation power fed to the reactor it is possible to ascertain the operating conditions favoring the production of predetermined intermediate products (e.g., methylene chloride or chloroform).

It is concluded that the use of customized lamps especially designed for each particular product on the basis of feasible changes in the characteristics of the existing radiation sources will favor a selective and more economical production of some of the stable intermediates, i.e., lamp design is an important feature in any optimal process design.     

垂直管内弹状气泡上升中壁面传递的实验研究

垂直管内弹状流壁面传递是诸多工业应用中需研究的重要问题之一。今用极限扩散电流技术,对弹状气泡上升时瞬时壁面剪应力和传质系数进行了测定,结果显示:当基于表观气速的Froude数FrG < 0.74时,壁面剪应力随弹状气泡和液塞的到来呈现方向相反的交替变化,壁面传质系数亦相应变化;而当FrG > 0.74时,剪应力方向一直向下,说明液膜向下流动,且弹状气泡和液塞的到来对壁面传质系数的影响很小。这说明下落液膜射流穿透了液塞段,控制了整个壁面传递过程。研究还对下落液膜区、尾迹区及液塞段的不同传递特征及机理进行了分析, 并结合气泡塔熔融结晶器中弹状气泡上升时的传热,对结晶操作条件的合理选择进行了讨论。     

突扩突跌掺气设施后泄槽底板脉动压力试验研究

有压洞出口后的突扩突跌掺气减蚀设施在水利工程中经常使用。由于水流受边界条件和掺气的影响,其流态和脉动压力往往与普通水槽的情况有很大的不同。通过水工模型试验,对突扩突跌掺气设施后泄槽底板上的脉动压力进行研究,揭示了掺气设施后泄槽底板上不同流动区域的脉动压力特性。从脉动压力的时域过程、均方根值、偏态系数、峰态系数和主频率等多方面得出冲击区、反射区和稳定区脉动压力的特性是不相同的结论。同一流量时,沿流程底板的时均压力都大于脉动压力的均方根值,在冲击区、反射区和稳定区,脉动压力的均方根值分别是同位置时均压力值的约0.5倍、0.6倍和0.7倍。研究成果可为更好地利用突扩突跌掺气设施提供有益的理论和试验依据。     

Turbulent flow field comparison and related suitability for fish passage of a standard and a simplified low‐gradient vertical slot fishway

Fishways are hydraulic structures that allow passage of fish across obstructions in rivers. Vertical slot fishways—VSFs—are considered the most efficient and least selective type of technical fishway solutions, especially due to their ability to remain effective even when significant upstream and/or downstream water level fluctuations occur. The scope of the present study is to perform numerical simulations in order to investigate and compare the hydraulic turbulent flow field in a standard and a simplified version of the most common VSF design. Implications in relation to fish swimming behaviour and fish passage performance are discussed. Different water depths (as well as discharges) were investigated, using a bed slope of 5%, as a reference for low‐gradient VSFs with a very limited selectivity that can be used in multispecies rivers in grayling‐barbel regions. Results show that maximum values of velocity, turbulent kinetic energy, and Reynolds stresses are higher in the standard design. However, corresponding to slot geometry and orientation, the direction of the main jet in the simplified design is more inclined towards the left side of the pool. This causes the eddy to split into 2 smaller ones; the minimum eddy dimension is reduced from 0.4–0.5 to 0.2–0.3 m. These dimensions are detrimental for fish passage efficiency, being more comparable with fish length (0.15–0.40 m), thus affecting migrating fish stability and orientation. Furthermore, the standard design provides a more straightforward upstream path and wider areas of low flow velocities and turbulence, useful for fish resting. Therefore, it is recommended that the standard design should be preferred over its simplified version, even if its construction costs are around 10–15% higher than the simplified one.