A modified embedded-atom method interatomic potential for the Fe–H system

A modified embedded-atom method (MEAM) interatomic potential for the Fe–H binary system has been developed using previously developed MEAM potentials of Fe and H. The potential parameters were determined by fitting to experimental data on the dilute heat of solution of hydrogen in body-centered cubic (bcc) and face-centered cubic (fcc) Fe, the vacancy–hydrogen binding energy in bcc Fe, and to a first-principles calculation for the lattice parameter and bulk modulus of a hypothetical NaCl-type FeH. The potential accurately reproduces the known physical properties of hydrogen as an interstitial solute element in bcc and fcc Fe. The applicability of the potential to atomistic approaches for investigating interactions between hydrogen atoms and other defects such as vacancies, dislocations and grain boundaries, and also for investigating the effects of hydrogen on various deformation and mechanical behaviors of iron is demonstrated.     

ZnO压敏陶瓷的非线性功能添加剂

本文采用单元掺杂与多元掺杂的方法，系统研究了几种过渡金属氧化物添加剂在控制ＺｎＯ压敏陶瓷非线性方面的作用，并根据金属阳离子外壳层电子结构稳定性和缺陷化学反应进行了分析，认为阳离子具有不饱和外层电子结构且半径与Ｚｎ＾２＋离子相近的过渡金属氧化物能改善ＺｎＯ压敏陶瓷非线性。     

RTM工艺中气泡形成及消除研究

总结了关于RTM（树脂压铸）工艺中气泡缺陷的文献报道，对RTM中气泡缺陷的形成机理、影响因素及各研究者提出的消泡方法、理论和模型进行了概述，同时对RTM工艺中气泡缺陷的研究现状给予充分关注，并对RTM缺陷研究的未来方向进行了展望。     

Stochastic defect diffusion model for relaxation effects in crystalline polyethylene

It is suggested that some relaxation processes observed in crystalline polyethylene are consequences of the diffusive motion of a particular defect called a point dislocation or twist dispiration loop along the polyethylene stems in lamellar crystals. The motion of the defect, characterized by a diffusion coefficient and a mobility, is described by solutions of the Smoluchowski diffusion equation with boundary conditions that constrain the defect to move along routes that produce experimentally observable results. The fact that passage of the defect causes both a 180° rotation of the chain and moves an extra CH₂ group in the direction of the chain axis is important to the interpretation of the data according to this model. The diffusion coefficient for a defect is estimated to be around 2 × 10^?9 cm² s^?1 at 70°C. This value is shown to be reasonable both from the viewpoint of detailed computer modelling of defect motion and contemporary ideas about scaling.     

Statistical properties of interparticle/void distance for amorphous plastics toughening

Statistical properties of interparticle/void distance (ID) for various particle/void and dispersion types are studied in relation with toughening of plastics using computer‐generated three‐dimensional models. Particle/void size groups adopted were either of constant diameter or of log‐normal distribution. Particles/voids were dispersed at uniform‐random or flocculated with multiple clusters. It was found that IDs are (a) of approximately Gaussian distribution for particles/voids of either a constant diameter or a log‐normal distribution, when they are dispersed at uniform‐random, but (b) not of Gaussian distribution for particle/void sizes of bimodal log‐normal distribution, nor for flocculated log‐normal distribution of particles/voids dispersed with multiple clusters. It was also found that the degree of ID uniformity for a single group of log‐normally sized particles/voids is not sensitive to standard deviation of particle/void size. Mixing effect on ID properties using two groups of log‐normally distributed particles/voids with similar mean particle/void diameters was simulated. It was found that, when a significant amount (36 vol %) of particles/voids of a small mean and standard deviation of ID was mixed with a group of particles/voids of a large mean and standard deviation of ID, mean and standard deviation of ID for the mixture were not substantially lower than those of the group of particles/voids of the large mean and standard deviation of ID. It was also found that the degree of ID uniformity for the mixture of the two groups was lower than those of individual groups, indicating that the mixing has deleterious effect on toughening. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4256–4262, 2006     

影响AlN陶瓷热导率的本征氧缺陷

对ＡｌＮ晶格中的铝空位，延展缺陷等进行了研究，研究表明，在固溶氧浓度较低（〈０．７５，原子百分数）的高热导率ＡｌＮ试样中，铝空位的存在会造成的ＡｌＮ晶胞局域收缩的现象，并观察到了铝空位的存在；固溶氧浓度较高（〉０．７５％）时，孤立的缺陷产生团聚，形成铝氧八面体；在氧浓度很高（〉０．７５％）的低热导率试样中观察到了反相区，多型体等延展缺陷。     

三维激光扫描技术在引水隧洞检修中的应用

三维激光扫描技术是国际上近年发展的一项集光、电和计算机技术于一体的新技术,利用该技术可以快速、精确地获取空间数据。锦屏二级水电站引水隧洞放空检修时发现少数洞内存在混凝土破损情况,但受时间与费用等因素限制,难于以采用常规手段详细检查混凝土表面缺陷与变形等问题。通过采用三维激光扫描技术对隧洞进行全断面扫描,及时探查了混凝土表面的缺陷并进行了处理,确保了工程安全运行;同时,还得到混凝土表面的三维坐标信息,建立了混凝土表面缺陷基准数据库,可为后续进一步分析混凝土表面缺陷的变化情况提供参考。     

球磨效率探讨

主要讨论了球石的装载量、球石空隙率、球石级配、泥浆密度等因素对球磨效率的影响。运用正交试验优选了各因素。     

基于信息流缺陷定位方法在软件测试中的应用

随着软件产业的飞速发展,人们对软件质量的要求也越来越高.现在,软件已经直接影响到了我们项目的成功和设备的安全.而软件中的复杂缺陷难以排除,因为它们涉及到许多程序要素之间的相互作用.论文扩展了基于信息流覆盖的缺陷定位技术.扩展后的技术融合了语句覆盖和分支覆盖技术,它还能定位复杂缺陷.试验结果表明,文中方法比基于语句覆盖、分支覆盖和定义使用对覆盖的方法要更可靠、更精确.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.