石油钻采阀门内壁热丝TIG堆焊

石油钻采专用阀门的使用有耐强腐蚀性要求，制造时需在内壁表层堆焊耐腐蚀材料。此类阀门具有质量大、形状特殊、焊接可达性差，焊接质量要求严格等特点；重点介绍了Fronius热丝TIG焊工艺和ETR全自动堆焊设备在阀门堆焊制造上的应用。     

高层住宅结构设计

主要介绍长沙梦泽园高层住宅从基础到上部楼层各部位的结构设计,以及在设计、施工过程中所考虑的一些问题及处理方法。     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

金属闪光外墙乳胶漆的研制及性能研究

以丙烯酸酯及有机硅单体为原料合成了核-壳型硅丙乳液,用自制分散剂将闪光铝粉分散成水性闪光铝粉浆,并成功分散于硅丙乳液中,加入进口助剂,配制成水性金属闪光外墙乳胶漆.讨论了基料的玻璃化温度、单体的加入方式、引发剂、乳化剂、反应温度、聚合工艺和pH等对乳胶漆性能的影响.     

岩体结构面对大跨度隧道工程稳定性影响初步研究

基于对沈阳至大连（简称沈大）高速公路扩建工程韩家岭隧道区域调查和分析，研究了岩体结构面对隧道施工过程的影响，围岩失稳方式及可能遇到的问题，并提出了解决这些问题的措施。     

纳米TiO_2改性苯丙乳液内墙涂料的研究

采用物理掺和法,在苯丙乳液中加入锐钛型纳米TiO2,制成内墙涂料,进行抑菌试验和甲醛降解实验研究,分析了纳米TiO2的光催化原理和抗菌机理。结果表明,随着TiO2含量增加,甲醛降解能力和抗菌性能增强,当TiO2含量为4%时效果最好。     

抗菌灭病毒涂料的研制及表征

在评价多种杀菌剂的抗病毒性能的基础上,筛选出杀菌和抗病毒性能均优异的功能助剂三氯苯基马来酰亚胺,用以研制成一种杀菌灭病毒功能内墙涂料。     

The influence of fluid elasticity on wall effects for creeping sphere motion in cylindrical tubes

Experimental results are presented of wall effect for the slow motion of spheres in elastic, constant-viscosity liquids. The results are correlated in terms of diameter ratio for d/D < 0.3, and Weissenberg number We < 5. Weissenberg number is defined as We = 2θV_m/d, with θ the Maxwellian relaxation time (θ = N₁/2τγ). The wall effect is found to be adequately described by Newtonian expressions for small Weissenberg number, We < 0.01. For larger values of the Weissenberg number, We > 0.2, virtually no wall effect is discernible; the small effect observed is correlated by the wall factor expression The wall effect observed is ascribed to the influence of fluid elasticity alone, since all the fluids used were elastic to a greater or lesser extent, but showed no shear thinning.      

纳米TiO_2可见光催化零VOC内墙乳胶漆

介绍了纳米TiO2光催化的机理和特点、纳米TiO2可见光催化零VOC内墙乳胶漆的性能和应用等。表明其不仅是零VOC无毒无害,而且是一种能在一般室内照明条件下净化空气的内墙乳胶漆。     

Personalized identification of abdominal wall hernia meshes on computed tomography

An abdominal wall hernia is a protrusion of the intestine through an opening or area of weakness in the abdominal wall. Correct pre-operative identification of abdominal wall hernia meshes could help surgeons adjust the surgical plan to meet the expected difficulty and morbidity of operating through or removing the previous mesh. First, we present herein for the first time the application of image analysis for automated identification of hernia meshes. Second, we discuss the novel development of a new entropy-based image texture feature using geostatistics and indicator kriging. Third, we seek to enhance the hernia mesh identification by combining the new texture feature with the gray-level co-occurrence matrix feature of the image. The two features can characterize complementary information of anatomic details of the abdominal hernia wall and its mesh on computed tomography. Experimental results have demonstrated the effectiveness of the proposed study. The new computational tool has potential for personalized mesh identification which can assist surgeons in the diagnosis and repair of complex abdominal wall hernias.