Water vapor and oxygen permeability of wax films

The water vapor (WVP) and oxygen (O₂P) permeabilities of beeswax (BW), candelilla wax (CnW), carnauba wax (CrW) and microcrystalline wax (MW), formed as freestanding films, were determined. CnW and CrW both had small values for O₂P (0.29 and 0.26 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹⁴, respectively), which are less than half the value for high-density polyethylene and about a decade greater than the value for polyethylene terephthalate. O₂P values for BW and MW were about 6−9× greater than those of CnW and CrW. WVP of CnW was 0.18 g·m⁻¹·sec⁻¹·Pa⁻¹ × 10⁻¹², which is about one-half the value for CrW and MW and about one-third the value for BW. The WVP of CnW was somewhat less than that of polypropylene and somewhat greater than that of high-density polyethylene. Differences in permeabilities among the wax films are attributed mainly to differences in chemical composition and crystal type as determined by X-ray diffraction.     

旋风管内气相的湍流运动特性

利用二维激光多普勒测速仪(LDV)测量了旋风管内湍流运动的时均速度、脉动速度、能谱函数、微分尺度及湍流耗散等参数，对湍流特性参数分布进行了详细的描述，并初步分析了旋风管内湍流运动特性对颗粒分离的影响.     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

气液并流吸收过程中液相近界面浓度分布的全息干涉测量

1 INTRODUCTION Mass transfer across free interface of gas-liquid flow is of extensive importance and is encountered in most industrial applications. A close investigation of concentration distribution near the interface is helpful to understand mass transfer phenomena, to guide the development of transport theories, and to optimize the design of gas-liquid contact equipment. Laser holographic interference technique provides a precise and noncontact measurement method for measuring the tran…     

Simulation of nitrogen dynamics and biomass production in winter wheat using the Danish simulation model DAISY

A dynamic simulation model for the soil plant system is described. The model includes a number of main modules, viz., a hydrological model including a submodel for soil water dynamics, a soil temperature model, a soil nitrogen model including a submodel for soil organic matter dynamics, and a crop model including a submodel for nitrogen uptake. The soil part of the model has a one-dimensional vertical structure. The soil profile is divided into layers on the basis of physical and chemical soil characteristics. The simulation model was used to simulate soil nitrogen dynamics and biomass production in winter wheat grown at two locations at various levels of nitrogen fertilization. The simulated results were compared to experimental data including concentration of inorganic nitrogen in soil, crop yield, and nitrogen accumulated in the aboveground part of the crop. Based on this validation it is concluded that the overall performance of the model is satisfactory although some minor adjustments of the model may prove to be necessary.     

磁化水配料对TiO2压敏陶瓷电性能和微观结构的影响

研究了使用磁化水配料对TiO2压敏陶瓷电性能和微观结构的影响。电性能测量及SEM和XRD微观结构分析结果表明：磁化水配料制备的TiO2压敏电阻具有较低的压敏电压和较高的非线性指数α。材料的主晶相为金红石相，由Ce,Si,Ti组成的Perrierite第二相均匀分布在晶界区域。因此，采用磁化水配料可以改善材料的工艺性能和陶瓷烧结体的微观结构，从而提高元件的电性能。     

酪素/蒙脱土插层复合物制备及其耐水性能研究

在十六烷基季胺盐存在下进行蒙脱土插层得到[H4N(CH2)15CH3]+-蒙脱土插层物,酪素加热溶解后与[H4N(CH2)15CH]+-蒙脱土插层物混合,保温复合,然后沉淀分离,得到干酪素/蒙脱土纳米复合物。用XRD,TEM和TGA表征酪素纳米复合物的结构与性能。结果表明,插层复合物中蒙脱土晶片间距扩大,插层复合物耐热性能明显提高,与纯酪素相比,复合物拥有极好的耐水性能,特别适用于制备高速高性能啤酒生产线用贴标胶。     

气流床水煤浆气化技术的应用现状及开发进展

气流床水煤浆气化是煤高效、洁净利用的一项关键技术。简述了具有代表性的气流床水煤浆气化技术的应用现状及开发进展,并分析了影响水煤浆气化的主要因素,如烧嘴、耐火砖、进料系统、激冷环等,提出了一些改进措施。     

啮合型同向旋转双螺杆挤塑机熔体输送机理研究

本文提出了描述啮合型同向旋转双螺杆挤塑机中非等温三维熔体输送流场的理论模型。借助罚函数有限无及边界无法对该流场进行了求解。此后计算和分析了熔体输送段的重要工作特性参数。计算结果和实验结果的良好吻合证明所采用的模型合理、计算方法可行、计算结果可靠。     

Preparation of fluoroacrylate nanocopolymer by miniemulsion polymerization used in textile finishing

Latex based on fluoroacrylate (TAN) and other comonomers was prepared via miniemulsion polymerization in the presence of stearyl trimethyl ammonium chloride (STAC) and 2, 2′‐azobis (2‐amidinopropane) dihydrochloride (ABAP) as a water soluble initiator. Light transmittance studies demonstrated that the light transmittance of prepared emulsions increases with the amount of TAN, STAC, cosolvent DPM, and hydrophobe DM. Given suitable reaction temperature and quantities of TAN, STAC, DPM, and DM, a copolymer emulsion of fluoroacylate with a particle size of 50 nm was produced. The water repellency tested on polyester fabrics displayed greater effectiveness than that of commercial products with higher fluorine content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1466–1472, 2004