特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

浅谈赣抚大堤樟防1标射水造墙的接缝技术和处理措施

介绍射水造墙的接缝原理，并把自己在施工过程中为确保接缝质量达到设计要求而总结出一些经验和处理措施提出为一起探讨。     

泄压注浆法在治理小型突水中的运用

七煤集团建设工程公司在施工辽阳铧子石膏矿主、风井井筒时 ,多次采用泄压注浆法成功通过中小型含水层 ,对小型突水进行了有效封堵 ,取得了较好的经济效益     

活动式水冷撇渣器的设计及应用

活动式水冷撇渣器是根据高炉冷却壁的工作原理设计的。第一台活动式水冷撇渣器于１９９３年２月２７日在安钢４号高炉投入运行，使用寿命长达１７个月零１８天，通铁量达到４０万ｔ。这种活动式水冷撇渣器具有投产少，收益高，维修方便，安全可靠等优点。     

用瑞利波检验高喷防渗墙的施工质量及地层分布特征

本文阐述了瞬态多道瑞利波探测的原理和方法，并将其应用到大堤高喷防渗墙施工质量的检验中，取得一定成效，测试结果与测压管观测结果对比，相互吻合，为类似工程的质量检验提供了一种可采用的检测手段。     

THE STICKY ISSUES OF DRYING

Unconrolled agglomeration of particles and adhesion of the particulate mass to wall surfaces are common severe problems in many drying operations. This paper reviews the mechanisms of interparticle and particle-surface attraction as well as the theory and the existing tests for characterising powders in terms of internal strength, wall friction and adhesion. The usefulness of the information obtained from these tests in dryer design and operation is critically reviewed. The importance of powder stickiness in various types of dryers is discussed and established methods of combating the problem are presented Recommendations an made for further research in the area of powder cohesion and adhesion.     

圆筒形铸件缩松缩孔的产生原因及解决方法

针对圆筒形铸铁辊体冒口端面产生的缩松、缩孔缺陷，进行了举例说明、系统分析，找到了缺陷产生的原因及影响因素。通过解决措施的应用与实施，有效地克服了圆筒形辊体铸件冒口端面产生的缩松、缩孔缺陷，同时应用到其它大型圆筒形铸件中，都得到了良好效果。     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

Matrix mediated alignment of single wall carbon nanotubes in polymer composite films

Alignment of single wall carbon nanotubes (SWNT) in liquid crystalline (LC) polymer matrix imparting orientation to the nanotubes along the nematic director was studied by atomic force microscopy, measurements of electrical conductivity and Raman spectroscopy of the composite in the directions parallel and perpendicular to the nematic director. The composites were prepared through dispersion of SWNT with LC monomer in a common solvent, their alignment in nematic monomer and consequent UV polymerization of the monomer. The anisotropy of electrical and optical properties of the system depends strongly on the concentration of the nanotubes in the range of 1-10% SWNT being especially strong for smaller concentrations and negligible at higher loads. A simple semi-quantitative model is suggested to account for the orientational behavior of nanotubes in nematic matrices. It successfully describes the observed anisotropy of physical properties at microscale (up to 200 μm) in terms of anchoring of the polymer chains to the nanotubes surface and adjustment of the nanotubes orientation to the nematic direction due to such coupling. The increasing disorientation of the nematic domains at higher nanotubes loads is explained as a development of larger number of LC defects induced by the nanotubes in the nematic matrix due to their intrinsic nature of aggregation. The anisotropy of physical properties at macro scale (several millimeters) is much smaller and less dependable on SWNT concentration because differently oriented LC domains effectively wash out the anisotropy.