Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

一种基于混沌同步的噪音衰减算法

论文提出了一种混沌通信系统的噪音衰减算法,该算法利用混沌同步现象在接收端获得正确的噪音估计值,从而从接收信号中滤除噪音恢复出正确的信号。通过数值仿真试验表明该方法是可行的。     

Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

Damage Development in Gray Cast Iron under Static Deformation

The authors discuss the results of experimental investigation of structural degradation of gray cast iron at various stages of static tensile deformation. Analysis of the deformation process has revealed that damageability of a material under loading can be assessed by both a special strain parameter and scatter of hardness characteristics or a ratio of the modulus deviation to the current value of the elastic modulus. A correlation between these parameters has been established.     

无线电车载监测站的信号采集与通讯系统

本系统采用LabVIEW对无线电监测信号进行采集和处理．并开发用户界面。在Delphi平台上运用远程访问服务实现了无线电车载监测站与中心固定站的通讯。LabVIEW主程序对通讯子程序进行调用。     

塔里木油田水碳酸盐平衡系数与有机酸的意义

根据统计学规律,对塔里木盆地油田水进行了研究,阐明了该盆地油田水的碳酸盐平衡系数(简称为R_C)与有机酸的基本特征。从油田水的无机组分与有机组分的统计分析中发现了油田水的碳酸盐平衡系数与有机酸存在明显的负相关性,进一步论证了碳酸盐平衡系数和有机酸与油气聚集及油气性质的关系。碳酸盐平衡系数越低及低碳有机酸的含量越高,它们与油藏,尤其是与 轻质油或气藏的关系越密切。从两者的关系中初步了解到有机酸的溶蚀作用对油气藏中储层次生孔隙的形成应有较重要的影响。     

WPAN/WLAN应用环境下基于PER的链路自适应算法

本文重点研究基于包错误率测量的链路自适应算法，分析了包错误率与信道参数的关系，提出了一种有别于固定门限值方案的优化门限值方案。仿真结果表明，优化门限值方案的网络吞吐量要大于固定门限值方案和基于信干比估计的链路自适应算法，最大增幅可达12Mbit/s。在系统引入重传机制后，网络吞吐量将有所损失，但最大不超过1Mbit/s，相比较服务质量的提高是值得的。需指出的是，虽然分析和仿真均以HIPERLAN／2为例，但不失一般性，它们同样适合于WPAN/WLAN等类似系统。     

高分辨率地震资料处理中的优化速度分析方法

速度分析是地震资料处理过程中的重要一环。速度分析的质量直接影响动静校正,继而影响叠加成像以及偏移归位。针对如何优化速度分析,提出了基于道集资料噪音衰减、道集内相位时差校正、道集优化处理以及速度拾取应用约束等过程的优化速度分析方法。该方法在实际资料处理中取得了很好的效果。     

基于VXI总线的超宽带线性调频信号源的设计

主要介绍了VXI总线C尺寸超宽带线性调频信号源的设计方法，重点描述了利用现场可编程逻辑器件FPAG和DSP设计VXI总线接口电路，以及数字波形存储直读技术在线性调频信号源中的应用。