Harnessing the Melting Peculiarities of Ultra‐High Molecular Weight Polyethylene Fibers for the Processing of Compacted Fiber Composites

Summary: Compacted fiber composites offer unique properties due to their lack of an extraneous matrix. The conditions of processing ultra‐high molecular weight polyethylene (UHMWPE) fibers were simulated in a heated pressure cell. In situ X‐ray diffraction measurements were used to follow the relevant transitions and the changes in the degree of crystallinity during melting and crystallization. The results strongly support the suggestion that the hexagonal crystal phase, in which the chain conformation is extremely mobile on the segmental level, constitutes the physical basis of compaction technologies for processing UHMWPE fibers into a single‐polymer composite. This report suggests that using a pseudo‐phase diagram outlining the occurrence of different phases during slow heating and the degree of crystallinity can provide valuable insight into the technological parameters relevant for optimal processing conditions.

Degree of crystallinity as a function of pressure and temperature in a region relevant to compaction processes.     

结合双粒子群和K-means的混合文本聚类算法

传统K-means算法对初始聚类中心选择较敏感, 结果有可能收敛于一般次优解, 为些提出一种结合双粒子群和K-means的混合文本聚类算法。设计了自调整惯性权值策略, 根据最优适应度值的变化率动态调整惯性权值。两子群分别采用基于不同惯性权值策略的粒子群算法进化, 子代间及子代与父代信息交流, 共享最优粒子, 替换最劣粒子, 完成进化, 该算法命名为双粒子群算法。将能平衡全局与局部搜索能力的双粒子群算法与高效的K-means算法结合, 每个粒子是一组聚类中心, 类内离散度之和的倒数是适应度函数, 用K-means算法优化新生粒子, 即为结合双粒子群和K-means的混合文本聚类算法。实验结果表明, 该算法相对于K-means、PSO等文本聚类算法具有更强鲁棒性, 聚类效果也有明显的改善。     

基于空间加权互信息的非刚性医学图像配准

互信息作为相似性测度标准在医学图像配准领域应用广泛,尤其是在刚性配准研究中,能实现较高配准精度和非常稳健的配准效果。然而由于非线性形变的复杂性,在非刚性配准领域,对基于互信息的配准方法进行深入研究势在必行。提出的方案采用基于B样条的自由变换模型模拟医学图像中解剖结构的非线性形变,同时根据变换模型,考虑空间信息对配准效果的影响,以空间加权的方式对互信息方法进行改进。使用对大规模参数优化效果较好的LBFGS方法对配准参数进行优化,编程实现程序,并通过实验对效果进行验证和分析。实验结果显示,该方案配准精度明显优于传统的互信息方法。     

UHMWPE／Epoxy冻胶体系的流变行为研究

研究了环氧树脂(Epoxy)加入后对超高分子质量聚乙烯(UHMWPE)稳态表观粘度、粘流活化能以及复数模量和粘度的影响。结果表明,环氧树脂添加量低于1ω,UHMWPE／Epoxy冻胶体系的表观粘度和粘流活化能都低于空白 UHMWPE冻胶体系;当环氧树脂添加量增加至3 ω以后,冻胶体系的表观粘度和粘流活化能均比空白UHMWPE冻胶体系高。     

浸渍增重率和反渗率研究

对浸溃过程中浸渍剂沥青的浸入率和反渗率进行了分析与探讨。提出了理想增重率、理论增重率与实际增重率的概念和计算方法。并比较了实际增重率与操作增重率的差别。同时分析了抽真空的绝对压力与施压的绝对压力对各项增重率和反渗率的影响。     

基于Profibus-DP总线技术的烟支重量控制系统设计

对烟支重量控制系统的控制原理做了较为详尽的描述,介绍了系统硬件组成和软件设计。系统可实时在线对高速烟支重量进行计算,及时准确剔除不合格烟支。通过Profibus-DP总线,烟支重量控制系统实现了与人机界面系统实时、可靠、高速通信,操作人员通过人机界面可以方便的调整控制参数,对设备进行维护。     

改进的粗糙集属性权重确定方法

改进属性重要度概念,给出了一种基于粗糙集理论的单属性重要度和组合属性重要度结合的确定属性权重的方法及其具体操作步骤。通过实例说明,改进的粗糙集权重计算方法具有普适性,权重计算更合理。     

基于改进卡方统计的微博特征提取方法

通过对微博文本特征信息的分析与研究,提出一种基于改进卡方统计的微博特征提取方法。扩充微博信息分类特征,在传统的卡方统计量的基础上,引入了频度等因素,改进特征选择方法;在传统的特征项权值计算的基础上,提出了新的改进卡方统计量的方法,改进权重计算效果。对上述方法利用经典KNN和SVM算法进行了测试,实验结果表明该方法提高了微博信息分类的准确率。     

基于区域权函数理论的多电极电磁流量计电极设计

基于Shercliff权函数提出区域权函数概念,设计多电极电磁流量计,通过测量管道截面不同位置的弦端电压,计算各区域的轴向平均速度,实现速度分布与体积流量的测量。着重研究了流量计电极设计,选取不锈钢平头方案的多电极电磁流量计,对于阀门下游的非轴对称单相流体积流量测量精度高于±1.0%,倾斜管固—液两相流实验证明:该设计对于两相流非轴对称的速度分布测量具备可靠性。     

Rheological behaviour of polysaccharide aqueous solutions

Several data relative to the viscosity of water-soluble polysaccharide solutions were collected from the literature and processed by different rheological models. Some relationships between the viscosity of these polymer solutions, their molecular weight and their solution concentrations, were established and their validity checked. Thus, an accurate equation correlating the viscosity and both the shear rate and the solution concentration of different water soluble polysaccharides (xanthan, hyaluronan, carboxymethylcellulose) was deduced on the basis of Cross' model which suggests two domains in which the viscosity is constant, i.e. very low and very high shear rate ranges. Then, an expression relating the zero-shear viscosity (A) and the concentration of their solutions was proposed. Finally, an alternative equation to that of Mark–Houwink correlating the molecular weight and the intrinsic viscosity of the water-soluble polysaccharides studied in this paper was found.