旋转导向钻井偏心稳定器横向振动研究

旋转导向钻井偏心稳定器横向振动研究是国家863“可控(闭环)三维轨迹钻井技术”课题研究的部分内容。选取偏心稳定器的心轴作为研究对象,以偏心稳定器心轴连续梁系统的横向振动模型受力分析为基础,根据课题研究中所设计的心轴结构形式,建立了与实际情况较为接近的三铰支点的连续梁系统横向振动方程;并分析了偏心稳定器横向振动对钻井工具和钻具系统的影响,为合理进行心轴设计以及偏心稳定器样机在现场的正确使用和钻井参数的合理选择,提供了科学的理论依据和实用的计算方法。计算实例表明,当钻压范围选择在80~250kN时,215.9mm井眼钻进中的确存在19~20、61~63、162~163r/min前三阶横向共振转速区间,因此在选择钻井参数时应通过钻压与转速的配合,尽可能避开横向共振转速,以保证下部钻具组合系统及作业安全。     

影响道路沥青低温抗裂性能的因素

用弯曲梁流变仪、直接拉伸试验机对7种国内外油源沥青样品进行了低温抗裂性能的评价，从沥青的四组分、相对分子质量及其分布来分析其对沥青低温抗裂性能的影响，结果表明，沥青的相对分子质量分布宽，对沥青的低温抗裂性能有利。     

Application of piece‐wise linear weight functions for 2D 8‐node quadrilateral element in contact problems

The present study is a continuation of our previous work with the aim to reduce problems caused by standard higher order elements in contact problems. The difficulties can be attributed to the inherent property of the Galerkin method which gives uneven distributions of nodal forces resulting in oscillating contact pressures. The proposed remedy is use of piece‐wise linear weight functions. The methods to establish stiffness and/or mass matrix for 8‐node quadrilateral element in 2D are presented, i.e. the condensing and direct procedures. The energy and nodal displacement error norms are also checked to establish the convergence ratio. Interpretation of calculated contact pressures is discussed. Two new 2D 8‐node quadrilateral elements, QUAD8C and QUAD8D, are derived and tested in many examples, which show their good performance in contact problems. Copyright © 2004 John Wiley & Sons, Ltd.     

A simple approximation algorithm for the weighted matching problem

We present a linear time approximation algorithm with a performance ratio of 1/2 for finding a maximum weight matching in an arbitrary graph. Such a result is already known and is due to Preis [STACS'99, Lecture Notes in Comput. Sci., Vol. 1563, 1999, pp. 259-269]. Our algorithm uses a new approach which is much simpler than the one given by Preis and needs no amortized analysis for its running time.     

高分子量丙烯酰胺-DAC共聚物的研制

采用复合引发体系 ,以丙烯酰胺 (AM)和阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)为共聚体 ,进行水溶液绝热聚合 ,研制了一种DAC单体含量为 4 0 %～ 5 0 %、相对分子质量大于 1× 10 7的阳离子型聚丙烯酰胺。     

新型无灰分散剂的结构分析研究

通过薄膜渗析、红外光谱、凝胶渗透色谱、皂化反应等一系列手段建立了一套对无灰分散剂的系统分析方法，并利用该方法得到了一种新型无灰分散剂及其衍生物的平均结构、相对分子质量分布、分散度等重要结构信息，得出该新型无灰分散剂的结构与传统无灰分散剂的结构不同。     

《周培德三角剖分不是最小权三角剖分》一文商榷——反例不成立

周培协三角剖分是否能得到最小权三角剖分，周培德在《周培德三角部分不是最小权三角剖分》一文撰写之前已有新的结论，本文还指出《周培德三角剖分不是最小权三角剖分》一文所举反例不成立。     

聚碳硅烷的分子量分布与可纺性研究

阐述了聚碳烷的合成及其分子量分布，讨论了高低分子含量对聚碳硅烷熔点及可纺性的影响，而且提出了分子量分布的控制标准与方法。     

Radiation demineralised bone enhanced osteoinductive capacity after transplantation

Using a mediating alkyne gas during the radiation treatment prevents the degradation of natural and synthetic polysaccharides and proteins. The product has higher viscosity and is more elastic than the original material and, therefore, gives enhanced functionality. Protein, within demineralised bone, too can be modified to give enhanced osteoinductive capacity after transplantation. Thus new functionalities can be achieved from the new products produced in food and medical products.     

壳体理论在水压爆破中的应用

在壳体理论的基础上,考虑到薄壳型结构水压爆破的特点,提出了一种新的药量计算公式,并得到了初步实际工程验证.