淮河流域水资源短缺风险评估与时空分析

根据2003-2013年淮河流域五省的降水量、径流系数、人均水资源量、人均GDP、人口密度等相关数据,构建水资源短缺风险评价体系,用熵权法对指标赋值,运用可变模糊模型对淮河流域及各省的水资源短缺风险进行评估和时空差异分析。结果表明:2003-2013年间淮河流域水资源短缺风险值总体较高,且呈缓慢的增长趋势,2004年降水较少,风险值达到最高;十年间河南省风险增加最为明显,而山东省较为稳定,风险增加也最低;在淮河流域五个区域中,河南省的风险程度最高,达到3.52;江苏省、山东省次之;安徽省和湖北省相对较低,达到2.86和2.51。水资源短缺风险二级指标分析发现,危险性最强的是河南省,安徽省最小;水资源短缺易损性最强的是山东省,湖北省最小;水资源短缺暴露性最强的是江苏省,山东省最小;水资源短缺可恢复性最好的是湖北省,河南省最差。同时,所有评价指标中人口密度、人均GDP、降水量对水资源短缺风险的影响较大。     

应用质谱扫描测定胸腺肽相对分子质量

目的 精确测定胸腺肽相对分子质量分布。方法 采用质谱扫描法。结果 3批胸腺肽相对分子质量均在2000～4000,无10 000以上的大分子蛋白。结论 本方法灵敏度高,可直观地测定胸腺肽相对分子质量分布状况,为控制胸腺肽质量提供了新的检测方法。     

Oxidative stability of high-fatty acid rice bran oil at different stages of refining

The contents of natural antioxidants and the oxidative stability of rice bran oils at different refining steps were determined. Tocopherols and oryzanols were constant in crude and degummed oils but decreased in alkali-refined, bleached and deodorized oils. The process of degumming, alkali-refining, bleaching and deodorization removed 34% of the tocopherols and 51% of the oryzanols. During storage of deodorized oil for 7 wk, 34% of the tocopherols and 19% of the oryzanols were lost. The maximum weight gain, peroxide value and anisidine value were obtained from alkali-refined oil during storage. The order of oxidation stability was crude ≥ degummed > bleached = deodorized > alkali-refined oil.     

High molecular weight polypropylene nanospheres: Synthesis and characterization

The high molecular weight (MW) polypropylene with average particle size of 60 nm was synthesized by controlled growth mechanism using Ziegler–Natta catalyst. The atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies showed that PP nanoparticles were spherical in shape. Structure and crystallinity were concomitantly studied through Fourier transform infrared spectroscopy and X‐ray diffraction, respectively. It shows nanospherical PP particles with more crystallinity (～ 75%) compared with macrosized PP (～ 59%). In addition, differential scanning calorimetry studies revealed the finite particle size effect on T_g and the scale dependence T_g followed a first order exponential trend. As particle size goes down to nano‐ scale from macrosize, continuous elevation of T_g's were observed from ?25 to ?11°C. This phenomenon was directed to configuration entropy of single spherical nanoparticles of PP. The mechanical properties and surface roughness were also evaluated through AFM. At last, the properties of nanosized PP were compared with micron and macrosized particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

超高分子质量聚乙烯纤维黏结强度增强方法研究

为提高超高分子质量聚乙烯(UHMWPE)纤维复合材料中纤维与树脂基体之间的界面黏结强度,提出通过不同质量分数的硅烷偶联剂KH-570处理纳米SiO_2对UHMWPE纤维进行表面改性。对改性处理后的纤维与乙烯基酯树脂进行黏结强度试验,发现硅烷偶联剂处理纳米SiO_2能有效提高纤维的界面黏结强度,同时使纤维保持一定的断裂强度。     

阻垢缓蚀剂对不锈钢管缓蚀效果的评定方法

用点蚀电位法和失重法评价了七种阻垢缓蚀剂在不同冷却水样中对不锈钢的缓蚀效果。用腐蚀失重法评价阻垢缓蚀剂对不锈钢的缓蚀效果，既不合理也很难测准。点蚀电位法是评价阻垢缓蚀剂对不锈钢缓蚀效果的有效方法，但要选择合适的空白水样。     

The Estimation of the Molecular Weight of Polytetrafluoroethylene Based on the Heat of Crystallisation. A Comment on Suwa's Equation

Summary: The influence of number‐average molecular weight ranging from 1.4 · 10⁴ to 1.2 · 10⁶ g/mol on the thermal behaviour of polytetrafluoroethylene (PTFE) has been studied. Samples have been prepared by radiation‐induced degradation of commercial PTFE. The molecular weight has been calculated using end‐group concentration determined by infrared (IR) spectroscopy and ¹⁹F solid‐state nuclear magnetic resonance (NMR) spectroscopy. Melting and crystallisation heats were investigated by differential scanning calorimetry (DSC). The results have been discussed with respect to quantitative relationships between number‐average molecular weight and heat of crystallisation of PTFE described in the literature. The molecular weight calculated from Suwa's equation, which is often used in the literature, has been found to be too low.

Concentration of end‐groups and the molecular weight of PTFE versus the irradiation dose.     

高固体分丙烯酸树脂相对分子质量的研究

采用溶液聚合法合成高固体分丙烯酸树脂,用凝胶渗透色谱(GPC)法分析引发剂的种类和用量、反应温度及聚合工艺对丙烯酸树脂的相对分子质量及其分布的影响。结果表明,选用偶氮二异丁腈和过氧化苯甲酰两种引发剂进行复配可提高聚合物的相对分子质量;采用“饥饿态”聚合工艺进行聚合反应可有效控制聚合物的相对分子质量,且相对分子质量分布均匀,分散度小于2;当引发剂用量为2%,在110℃的反应条件下制得的丙烯酸树脂的综合性能优异,固含量超过70%,相对分子质量可达4万。     

基于协方差特征的裁剪AdaBoost算法

针对Haar-like特征的缺陷以及AdaBoost算法存在训练耗时的问题,提出一种基于协方差特征的改进AdaBoost人脸检测算法。该方法用协方差特征代替Haar-like特征进行特征提取;然后使用特征裁剪和动态权重裁剪相结合的裁剪AdaBoost算法,训练得到基于协方差特征的强分类器。实验结果表明,相对于基于Haar-like特征的AdaBoost算法,该算法性能没有明显退化且很大程度上提高了训练速度。     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.