PFC控制技术的一种改进方案

文章首先指出了目前ＰＦＣ所用控制技术的缺陷，然后提出了一各改进方案，并从理论分析和仿真验证的角度证明了改进方案的可行性和先进性。     

ID-based non-interactive zero-knowledge proof system based on one-out-of-two non-interactive oblivious transfer

In this paper, we propose an ID-based non-interactive zero-knowledge proof system based on the 1-out-of-2 noninteractive oblivious transfer protocol. This zero-knowledge proof system is secure against a newly discovered cheating attack.     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

感应电动机转速对定子电流暂态过程的影响

本文运用根轨迹法，分析了感应电动机转速对定子电流暂态过程的影响。并通过对稳态时定子电流在电压阶跃干扰下的暂太响应分析，验证了结论有效性。     

Short cue presentations encourage advance task preparation: A recipe to diminish the residual switch cost.

In the task-switching literature, it has frequently been demonstrated that although advance task preparation reduces the switch cost, it never really eliminates the switch cost. This remaining residual switch cost received much attention, and it has been argued that advance preparation is restricted in nature. In the present study, the role of task-cue presentation in the establishment of the residual switch cost was investigated. In 4 experiments, the cue was removed during the preparation interval, and it was hypothesized that this would encourage participants to complete advance task preparation. The results of all 4 experiments provided support for this hypothesis: When the cue was presented for a short time and then removed, the residual switch cost completely disappeared. This was found for different cue types. Furthermore, Experiment 3 demonstrated that it was not the presence of the cue itself but merely differences in advance task preparation that caused the effects. This suggests that advance task preparation is not as restricted in nature as previously assumed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

采用ZnO灭磁时阀片均流/均能的探讨

从ZnO电阻的非线性特性出发,对采用ZnO作为灭磁电阻时阀片的均流/均能进行理论论述,指出阀片均能性能的好坏主要依赖于阀片自身的特性;分析比较了ZnO阀片的不同选择方法对均流/均能的影响,指出阀片的均流/均能很大程度上取决于可供选择的阀片的库存量.该研究为发电机励磁系统的安全稳定运行提供了有力的保证.     

强流质子直线加速器中束晕现象研究

从束流包络方程与单粒子运动方程联立模型出发，考虑了纵向能量方程的耦合，研究了强流质子直线加速器中的束晕现象。采用相交间的Ｐｏｉｎｃａｒｅ截面方法和实空间Ｐｏｉｎｃａｒｅ截面方法，研究了周期聚焦系统失配的情况下束晕的形成以及加速对束晕形成的影响。     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

电容器介质吸收电流的测量和表征

在外电场作用下，电容器介质的吸收电流和漏电电流混杂而难以分开，但外电场除去后吸收电流对电容器放电总电荷所贡献的百分比具有确定值，吸收电流的释放遵从自由弛豫规律。可用响应时间ｒ’表征。实验给出了一些常见介质的吸收电流表征参数。