THE ROLE OF INTERFACIAL PHENOMENA IN A LIQUID-LIQUID REACTION SYSTEM: EXTRACTION OF PROPANOIC ACID BY TRIOCTYLAMINE

The kinetics of extraction of propanoic acid from water to isobulanol by reaction with trioctylamine have been investigated. Mass transfer was modelled by extending the approach used in absorption with chemical reaction, as it is usually done for liquid-liquid reactions. The presence of the amine, however, gave rise to phenomena that cause this method to fail, producing inconsistent results. In order to explain these data, the presence of relevant interfacial phenomena must be supposed.     

基于SR-UKF的OFDM频偏迭代估计算法研究

对高速运动环境下多普勒效应引起的大载波频偏引起的载波间干扰进行数学分析,建立带频偏的非时变和时变频偏OFDM动态状态空间模型,提出了基于平方根无迹卡尔曼滤波（square-root unscented Kalman filter , SR-UKF）的频偏估计算法。将非线性状态估计思想引入OFDM频偏估计中,实现了对频偏的有效跟踪和估计。仿真结果表明,在大频偏、高阶调制下,SR-UKF频偏估计算法较自消除算法、最大似然估计算法具有更好的误码率性能;在收敛精度、稳定度和对信噪比敏感度方面,性能较扩展卡尔曼滤波算法均有所提升。     

车路协同环境下基于动态车速的相位差优化模型

针对基于固定路段行驶车速的相位差优化模型在优化双向滤波时存在的不足,本文基于车路协同环境下车辆–信号控制系统双向、实时通信的运行环境,研究并建立了车辆动态速度与交叉口相位差的整合优化模型.首先,基于对上游交叉口流出的两类交通流,即饱和交通流和非饱和交通流运行特征分析,建立了速度与相位差相互影响关系模型,在此基础上,分别针对两种不同的交通流,以干道实时流量与速度乘积最大为目标,考虑初始排队清空时间,可变速度范围,和相位差取值空间等约束条件,建立了车辆速度与相位差的动态优化模型,从而实现干道交通流不停车通过量最大且延误最小的目的.最后,对比分析了本文模型与经典Maxband绿波优化模型及Synchro软件的信号协调控制优化方案,结果表明,相比其他两种典型优化方法,本文模型能显著提高双向绿波带宽并大幅减少停车次数,提高协调控制的效益.     

Stabilization of PCC dispersions prepared directly in the mother-liquid after synthesis through the carbonation of (hydrated) lime

Various CaCO₃-based products are often used in the form of concentrated aqueous dispersions. This study investigates the stabilization of PCC dispersions prepared directly in the mother-liquid after the carbonation of (hydrated) lime through the adsorption of a commercial sodium polyacrylate dispersant. The results demonstrate that the composition of the mother-liquid, particularly the Ca²⁺ activity, profoundly influences virtually all processes pertinent to dispersion stabilization—from the initial charging of the CaCO₃ surface in base PCC dispersions, to the surface charge regulation and dispersion stabilization efficiency of the polyacrylate dispersing agent. Rising prominence of the counterion condensation effects in Ca²⁺ rich solutions limits the conditions conducive to the surface charge regulation through dispersant adsorption to an optimum pH range of about 8-11. Furthermore, dispersion stability analysis, based on the classical DLVO theory of colloid stability, and corroborated by experimental evidence in the form of particle size distribution analyses, also indicates that optimum stability conditions for such PCC dispersions are established with small dispersant doses (0.25-0.5% per dry weight) in the pH range of about 9-11.     

基于集成温度传感器的硅微陀螺仪数字化温度补偿研究

提出了一种基于集成温度传感器的硅微陀螺仪数字化温度补偿方法。首先,介绍了集成温度传感器的硅微陀螺仪基本结构原理,分析了硅微陀螺仪动力学方程以及温度变化对硅微陀螺仪谐振频率、品质因数、标度因数和零偏的影响。然后,设计了基于FPGA的硅微陀螺仪数字化补偿电路。最后,经过温度特性实验得到标度因数和零偏随温度变化曲线,建立了温度补偿模型,提出分段温度补偿方法。经过温度补偿后,标度因数和零偏的温度系数分别由316.66×10-6/℃和366.22°/(h·℃)减小为69.67×10-6/℃和115.25°/(h·℃),证明了补偿方法的正确性和可行性。     

一种基于过零点的时延测量方法

信号传输时间（时延）的测量,是雷达、声纳系统的关键技术之一。本文研究了一种基于过零点的时延测量方法,在建立过零点搜索模型的基础上推导得出时延测量的测量结果表达式;定量分析了高斯白噪声条件下过零点时延测量的测量精度,得到测量误差的理论表达式。仿真与实验表明,过零点时延测量精度与信号频率、过零点数目、信噪比密切相关,当信噪比较高时,其测量精度与经典FFT法相当,而优势在于过零点时延测量的算法简单、计算量小,适用于对实时性要求较高的测量场合。     

循环冷却水零排污运行方案的研究

对循环冷却水系统零排污的技术可行性、经济性等进行了讨论，并针对大庆炼化公司循环冷却水系统零排污方案的实施加以详细描述，对实施过程中存在的问题予以了详细说明。     

Application of orthogonal collocations to some transport phenomena problems in co-axial cylinders and spheres

Collocation methods are developed for the solution of some differential equation models for transport phenomena problems in one-and two-dimensions in co-axial annuli of spherical and cylindrical shapes. General formulae are developed to obtain orthogonal polynomials over an arbitrary interval using two types of weighting functions. The convergence and accuracy of the methods are demonstrated using two test problems, i.e., calculation of effectiveness factors in (a) a spherical pellet with peripherally deposited catalyst and (b) a Raschig ring type cylindrical catalyst pellet. Comparisons of results obtained from the present methods with analytic solutions for the first-order reactions indicate good agreement. Numerical solutions are also obtained for the second-and the third-order reactions for which analytic solutions are not available. Results obtained in terms of a new Thiele modulus involving the ratio of volume of peripherally deposited part of catalyst to exterior surface area indicate that this normalization brings effectiveness factor versus Thiele modulus curves close together for co-axial spherical and long cylindrical pellets, as it does for these geometries without the inner co-axial portion.     

Inverse Procedural Modelling of Trees

Procedural tree models have been popular in computer graphics for their ability to generate a variety of output trees from a set of input parameters and to simulate plant interaction with the environment for a realistic placement of trees in virtual scenes. However, defining such models and their parameters is a difficult task. We propose an inverse modelling approach for stochastic trees that takes polygonal tree models as input and estimates the parameters of a procedural model so that it produces trees similar to the input. Our framework is based on a novel parametric model for tree generation and uses Monte Carlo Markov Chains to find the optimal set of parameters. We demonstrate our approach on a variety of input models obtained from different sources, such as interactive modelling systems, reconstructed scans of real trees and developmental models.     

甲醇装置高效分醇技术及双"零"节能工艺

针对甲醇分离系统存在的普遍性问题 ,提出了“少醇无水”工艺技术并进行了工业实际应用。在“少醇无水”工艺的基础上 ,又提出双“零”工艺的构思。分别对该两种工艺进行了经济效益分析。结果表明 :“少醇无水”工艺可使入塔醇含量由0 .987%降至 0 .5 62 % ,装置能力提高 6.0 %～ 11.12 % ;双“零”工艺可使 10万t/a甲醇装置生产能力提高 2 2 .0 0 %。