Analysis of PLR for Shared Switch Fabrics

A modular upgrade design for packet transport switch nodes is presented where packet loss is dramatically reduced by intra‐module and inter‐module buffer sharing. This modular design offers significant cost and power reduction in a high‐data‐rate system where buffers are highly costly and power‐greedy.     

Buck电路的一种软开关实现方法

提出了一种Buck电路软开关实现方法,即同步整流加上电感电流反向。根据两个开关管实现软开关的条件不同,提出了强管和弱管的概念,给出了满足软开关条件的设计方法。通过一个48V输入,19V/5A输出,开关频率为200kHz的同步Buck变换器样机,验证了上述方法的正确性,其满载效率达到了96.1%。     

同步整流Flyback电路的一种软开关实现方法

提出了适用于同步整流Flyback电路的一种软开关实现方法,即通过减小变压器激磁电感感量,使流过激磁电感的电流反向,从而达到开关管的ZVS软开关条件。分析了该电路的工作原理,给出了满足软开关条件的参数设计方法。最后设计了一个48V输入、5V/5A输出的电路模型来验证此方案的有效性。     

Asymptotic stability, ℓ2 gain,boundness analysis,and control synthesis for switched systems: a switching frequency approach

In this paper, several concepts of switching frequency are introduced to analyze the properties and performance of switched systems in infinite as well as finite‐time intervals. The observation is very motivating that different system properties and performances depend on different switching frequencies. Sufficient conditions ensuring asymptotic stability, ?₂ gain performance, and state boundness are derived on the basis of the notions of switching frequency, respectively. Then, on the basis of the analysis results, the control synthesis problems are addressed. LMI‐based design algorithms are proposed to meet different control synthesis requirements. Numerical design examples are provided to demonstrate our results. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability boundary analysis of the dynamic voltage restorer in weak systems with dynamic loads

In this contribution, a stability analysis for a dynamic voltage restorer (DVR) connected to a weak ac system containing a dynamic load is presented using continuation techniques and bifurcation theory. The system dynamics are explored through the continuation of periodic solutions of the associated dynamic equations. The switching process in the DVR converter is taken into account to trace the stability regions through a suitable mathematical representation of the DVR converter. The stability regions in the Thevenin equivalent plane are computed. In addition, the stability regions in the control gains space, as well as the contour lines for different Floquet multipliers, are computed. Besides, the DVR converter model employed in this contribution avoids the necessity of developing very complicated iterative map approaches as in the conventional bifurcation analysis of converters. The continuation method and the DVR model can take into account dynamics and nonlinear loads and any network topology since the analysis is carried out directly from the state space equations. The bifurcation approach is shown to be both computationally efficient and robust, since it eliminates the need for numerically critical and long‐lasting transient simulations. Copyright © 2011 John Wiley & Sons, Ltd.     

Some system design considerations for a high switching frequency PWM inverter

A sinusoidal PWM inverter is required to faithfully reproduce the control waveforms at the output with minimum distortion. This paper presents some design considerations for such an inverter. The choice of switching frequency is the main criterion which affects the output voltage harmonic distortion at high switching frequencies. This paper shows that there exists an optimum switching frequency above which the output harmonic distortion becomes more visible. The dead time generator circuit for a low cost inverter and effect of driver circuits on the output waveform are discussed. Experimental results from laboratory models are presented.     

三相共补复合开关的研制

功率因素过低对电网及负载有极大负面影响,在感性负载两端并接电容是常见的无功补偿方法。针对电磁开关和电力电子开关投切电容器在无功补偿装置应用中存在的问题,从分析功率因素补偿意义入手,提出三相共补开关拓扑结构及其电路模型,分析投切过程冲击电流形成机理及其避免对策。研制了一种基于AVR单片机在电压过零时投切并应用于低压无功补偿装置的复合开关。该复合开关的优点是电压过零时投切,冲激电流小;每相过零时触发中断,响应迅速快;采用了atmega16作为主控芯片,样机测试果表明达到设计之要求。     

NC—2T系列机芯加装KAIDA系列遥控频道转换噪声及消除方法

本文分析了彩色ＮＣ－２Ｔ系列机芯加装ＫＡＩＤＡ系列遥控功能后产生频道转换品噪声的原因及消除方法。     

基于ASON全光通信方案实现

针对目前ASON网络的智能优势和电控不足,给出了智能化全光网络设计方案。介绍了基于ASON的全光通信技术要求,并给出了实现全光交换的节点部件即智能化OXC的结构。对方案中采用的协议、接口、组网方式以及通信实现过程进行了描述,最后对方案的优势进行了分析。