Estimation of the Stress-Strength Reliability for Exponentiated Pareto Distribution Using Median and Ranked Set Sampling Methods

In reliability analysis, the stress-strength model is often used to describe the life of a component which has a random strength (X) and is subjected to a random stress (Y). In this paper, we considered the problem of estimating the reliability R=P [Y<X] when the distributions of both stress and strength are independent and follow exponentiated Pareto distribution. The maximum likelihood estimator of the stress strength reliability is calculated under simple random sample, ranked set sampling and median ranked set sampling methods. Four different reliability estimators under median ranked set sampling are derived. Two estimators are obtained when both strength and stress have an odd or an even set size. The two other estimators are obtained when the strength has an odd size and the stress has an even set size and vice versa. The performances of the suggested estimators are compared with their competitors under simple random sample via a simulation study. The simulation study revealed that the stress strength reliability estimates based on ranked set sampling and median ranked set sampling are more efficient than their competitors via simple random sample. In general, the stress strength reliability estimates based on median ranked set sampling are smaller than the corresponding estimates under ranked set sampling and simple random sample methods.     

心电地图仪中工频干扰的一种滤除方法

在心电地图仪中记录到的体表心电信号往往由于电磁的影响而引进工频干扰．基于体表心电信号中工频干扰的特点，作者提出了一种滤除工频干扰的方法，即就单独—胸导联信号通过提高频谱的分辨率来估计工频干扰的频率；基于最小均方误差准则来估计各导联信号中工频干扰的幅度和相位。文中还给出了该算法的流程图和滤波性能分析。模拟结果表明了该算法的有效性。应用该算法对心电地图仪中的工频干扰进行对消，取得了满意的结果。     

试论双点后方交会简便公式

根据双点后方交会的图形特点和已知条件，列出了方程组，推导出了双点后方交会直接计算座标的简便公式，同时求出了精度计算公式，以供测量人员参考     

VSP旅行时反演应用于VSP—CDP转换

非零偏移距垂直地震剖面(VSP)模型的制作是非零偏移距VSP资料处理的关键环节之一,是VSP-CDP转换的基础。本文试用旅行时反演修正非零偏移距VSP的模型,以加速模型的制作过程,提高非零偏移距VSP的处理速度。用合成VSP资料试算表明:旅行时的随机误差对模型的制作影响不大;只要能较准确地确定界面位置,用旅行时反演修改制作非零偏移VSP模型是可行的。本文还探讨了初始模型的不同选择方法,并将旅行时反演用于实际VSP资料的处理。结果表明,大大地节省了非零偏移距VSP资料的处理时间。     

TRT入口方管道爆裂原因剖析

介绍了鞍钢7#高炉TRT装置入口方管道爆裂事故经过,进行了原因分析,并提出了解决措施。     

论GPS星座组成及若干抗AS方案

本文首先讨论GPS星座组成及美国的用政策，阐述了AS措施及其对GPS测量的影响。然后，对抗AS的若干方案进行介绍，分别对平方法、互相关法、码相关干法及P－W技术（Ashtech法）进行叙述和评论，指出它们的优缺点，评述它们在GPS技术发展过程所起的作用。最后，对GPS星座建成后的形势作了小结，并对当前我国GPS事业的有关问题提出四点建议。     

浅谈连城锰矿4号矿段排土场的安全管理实践

针对连城锰矿4号矿段排土场的特点、影响稳定因素及可能产生的危害，在实践中采取了有效的管理措施，防止了排土场危害的产生，保证了排土场的稳定。     

基于广义最小均方的自适应递归滤波算法

本文提出了一种广义最小均方(GLMS)算法,分析了GLMS算法的性能,并根据GLMS算法,导出一种自适应递归滤波(ARF)算法。在推导中,ARF算法避开了超稳定定理,从而考虑自适应系统的严格正实条件和Popov不等式是不必要的。计算机模拟表明ARF算法具有很高的收敛速度。     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

双焊缝方矩形钢管生产工艺介绍

介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数.通过双焊缝方矩形钢管用冷弯等边槽钢的孔型设计、生产,实现了大截面双焊缝方、矩形钢管的生产,满足了客户的需求.