典型滞后超前控制器的频域法工程设计技术

所开发的典型超前/滞后串联校正型控制器的频域法工程设计方法依据的是简单的控制器结构,考虑了较宽范围的工业控制需求,设计步骤不多,设计计算量不大,所以在实际工程中有较大的应用潜力。特别是采用步进式的迭代设计思路,可经过多轮的简捷设计,设计出高性能的高阶控制器。电机调速控制系统的设计应用案例表明,应用该方法简单易行,可以设计出性能比PID控制器更优的控制器。     

新型大功率全固态调制器

介绍了大功率兆瓦级发射机的调制器种类,描述了采用电子管开关的调制器的工作原理以及新型采用全固态开关的调制器的工作原理,并对两种采用不同开关的调制器的性能进行了对比,介绍了一种可供兆瓦级发射机使用的全固态调制器。     

Optimization of gray-scale performance in pixellated-metal-mirror FLC-OASLM by equivalent circuit model

An equivalent circuit model of a pixellated-metal-mirror ferroelectric liquid crystal (FLC) optically addressed spatial light modulator (OASLM) is proposed. Using both structure and FLC material parameters of a real device and real material as the simulation parameters, the model is firstly confirmed by good agreement of simulation results and the reported experimental ones, and then utilized to optimize gray-scale performance of the OASLM. The model is developed from an improved FLC equivalent circuit, and has the ability to describe the voltage dropped across the modulating layer and to predict how optical outputs vary over time with the input drive voltage and control image. Simulation results indicate that gray-scale performance of the OASLM is highly dependent on write pulse width. More than 10 gray scales are observed when write pulse width is 100 μs and the number reduces to four when it reaches 500 μs. Other parameters of drive voltage can be set to adjust the region of write light intensity over which gray scales are best produced, and write pulses are found to be primary at high write light intensities, whereas erase pulses are dominant at low write light intensities. Furthermore, although gray-scale performance is weakly dependent on erase-light intensity, the erase light is necessary to ensure a proper erasure of the device and at least 1 mW/cm² is required in this study.     

写光波长对光折变空间光调制器分辨率的影响

结合光学实验及数值模拟,对写光波长的变化对基于Bi12SiO20(BSO)光折变晶体的光寻址空间光调制器(SLM)的调制传递函数(MTF)空间频率响应的影响进行了分析.光学实验分析结果和数值模拟分析相吻合,写光波长以及电荷位置对SLM的MTF空间频率响应的影响在本质上得到了统一.根据分析及讨论,较短波长的写光有利于获得较好的MTF空间频率响应.     

基于双平行PM调制的60GHz光毫米波RoF系统研究

提出了一种采用相位调制器产生六倍频光载毫米波的RoF系统。该系统使用一个双平行相位调制器实现六倍频的调制,通过调节相位调制器的相位偏移量,产生出抑制一阶边带的光谱,耦合相减后得到三阶边带信号,在光电检测器中拍频,产生六倍于射频信号的光载毫米波。仿真结果表明,10GHz射频信号可以产生60GHz光载毫米波信号,5Gb/s的数据信号可在单模光纤中传输10km以上。     

An Electroabsorption Modulator Monolithically Integrated with a Semiconductor Optical Amplifier and a Dual-Waveguide Spot-Size Converter

A semiconductor optical amplifier and electroabsorption modulator monolithically integrated with a spot-size converter input and output is fabricated by means of selective area growth,quantum well intermixing,and asymmetric twin waveguide technology.A 1550～1600nm lossless operation with a high DC extinction ratio of 25dB and more than 10GHz 3dB bandwidth are successfully achieved.The output beam divergence angles of the device in the horizontal and vertical directions are as small as 7.3°×18.0°,respectively,resulting in a 3.0dB coupling loss with a cleaved single-mode optical fiber.     

光纤耦合声光调制器键合膜系设计与制备

为了实现超高速的声光调制,该文提出了一种光纤耦合声光调制器键合膜系的设计与仿真方法。利用该方法设计并制作了一款工作频率为200 MHz、10 ns光脉冲上升时间的光纤耦合声光调制器。器件采用TeO2作为声光介质,36°Y 切LiNbO3作为压电换能器晶片,衬底层采用高纯度Cr,键合层为高纯度Au,结果表明器件性能测试良好。     

16-Bit三阶级联结构Sigma—Delta调制器的设计

设计一款可应用于压力传感器的高精度三阶2—1级联结构Sigma—delta调制器。MatlabSimulink建模仿真表明,信号带宽为500Hz,过采样率为128的情况下,该调制器信噪比高达119dB。通过对调制器非理想因数的分析,采用典型的0．35μm工艺整体实现该调制器,并用Spectre仿真,电路信噪比可达106．2dB,高于16住要求的98dB,整个调制器的功耗约为7mW。     

一种27kV／7AIGBT串联刚性调制器的设计与实现

介绍了一种采用IGBT串联技术实现某行波管27kV／7A大功率刚性调制器的设计方法,给出了主电路的拓扑结构,阐述了调制器工作原理,详细分析了实现该调制器的关键技术,并给出了采用该方案实现调制器的试验结果。     

一种基于高性能光波导脉冲单选器的研制

介绍了一种高性能光波导脉冲单选器的研制.该模块由高速前放电路,数字逻辑电路,强度调制器驱动电路,自动增益控制电路,以及强度调制器组成.模块能够从锁模激光器的连续脉冲中选出一个单脉冲,并保证消光比≥46 dB,插入损耗≤7 dB.文章重点介绍了系统的设计方案、工作原理、参数设计,以及特性曲线分析,并且对测试得到的主要参数进行了总结分析.