二维有限元网格的剖分及其节点编号优化

在二维有限无网格的剖分技术的基础上，针对工程上的需要，将单元编号做出相应的地理，以便能够高效快速简便地给出理想的剖分网格，降低工作强度。     

History of the stiffness method

This paper presents a brief history of the development of the stiffness method. We start by tracing the evolution of the method to solve discrete‐type problems such as trusses and frames composed of two node members. We then describe the method as it is applied to solve continuum problems modelled by finite‐difference and finite‐element methods. Copyright © 2006 John Wiley & Sons, Ltd.     

Determination of Flow Curves at High Strain Rates using the Electromagnetic Forming Process and an Iterative Finite Element Simulation Scheme

The knowledge of reliable material parameters is an essential requirement for the numerical analysis and planning of forming processes, especially when using high speed forming processes in industry. Therefore, a method was developed and implemented to determine the relationship between yield stress, plastic strain, and strain rate of aluminium alloys at very high strain rates of up to 10,000 s-1 by using the electromagnetic forming process (EMF) of tubular specimens. To determine the associated flow curves, an inverse engineering strategy combining an online measurement technique and multi-physical coupled finite element simulations is used. The results are discussed with regard to the anisotropic behaviour of specific aluminium alloys.     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

中国传统园林建筑审美意向的基本特征初探

本文以中国传统园林建筑为基点,结合艺术理论和具体的艺术形象,对传统园林建筑的基本元素、空间组织,整体形式和气氛表达进行了分析,并探讨其运用于当代设计条件的方式。     

P油田长4+52小层孔隙度三维模型的建立

为了更准确的评价P油田主要产层长4 52小层的储集能力，以随机模拟建模方法对该层的孔隙度进行研究，建立孔隙度分布三维模型。研究表明，长4 52小层属于低孔储层，平均孔隙度为11．85％。根据P油田储层物性分类原则，该储层在本区分布较为广泛，是今后挖潜的重点。     

环缝错边容器的有限元分析与容限探讨

采用有限元方法对 1台封头与筒体具有较大错边量的容器进行了应力分析 ,得到了错边区域的应力分布状况 ,并对其进行应力强度评定。结果表明 ,该容器错边部位的应力是满足应力分析准则的。通过对存在不同错边量的容器进行应力分析 ,探讨了容器的错边容限 ,对含有错边缺陷在役容器是否合乎使用的判断具有一定指导意义     

水轮发电机转子动平衡的时-频方法

提出了一种基于时域分析和频域分析的动平衡方法，应用于水轮发电机转子的动平衡。在这种时-频动平衡方法中，用时域分析来确定不平衡力的相位，用频域分析来确定不平衡力的大小。该方法具有平衡精度高、起机次数少的优点。用1台300MW水轮发电机转子的现场试验数据验证了该方法的准确性和适用性。     

Using Lyapunov's direct method for wave suppression in reactive systems

This paper proposes a new approach for stabilizing a homogeneous solution in reaction–convection–diffusion system with oscillatory kinetics, in which moving or stationary patterns emerge in the absence of control. Specifically, we aim to suppress patterns by using a spatially weighted finite-dimensional feedback control that assures stability of the solution according to Lyapunov's direct method. A practical design procedure, based on spectral representation of the system and dissipative nature of parabolic PDEs, is presented.     

MS方法的一个新证明及其结构优化算法

本文给出Ｍｉｌｎｅ－Ｓｉｍｐｓｏｎ（ＭＳ）预测─校正法新的导出方法，并以结构优化思想设计出通用性和可靠性较强的算法。