陶瓷企业公共关系与市场营销

公共关系是提高企业形象竞争力的法宝,企业将公共关系运用于营销活动之中,能够与社会公众建立、维持和发展良好的互利关系,通过树立良好的企业形象和信誉,从而为企业市场营销创造一个和谐的环境。从公共关系与市场营销的内涵入手,对市场营销中公共关系的作用和具体应用进行了初步的分析,希望通过这些分析,能够引起陶瓷企业在营销活动中对公共关系的注意。     

1998年九江抗洪启示录

简述1998年江西特大洪水的基本情况，重点介绍了九江防洪的形势和九江长江城防堤4～5号闸口间堤段溃决的情况及堵口过程，并总结了经验教训和抗洪工作的体会．     

LD泵浦的声光调Q腔内倍频激光器

研制成用ＬＤ泵浦的声光调Ｑ的Ｎｄ：ＹＶＯ４－ＫＴＰ腔内倍频激光器，得到了ＴＥＭ００模、频率高达１００ｋＨｚ的稳定的５３２ｕｍ绿激光脉冲系列输出，阈值泵浦功率为２７ｍＷ；在连续５７０ｍＷ的泵浦功率下，绿激光脉冲的峰值功率达１１００Ｗ，脉宽为４．６ｕｓ；输出功率稳定，在±５℃的工作温度变化下，输出功率变化小于±２％。此种器件可望得到广泛的应用。     

Interfacial activity and rate of palladium(II) extraction with decyl pyridine monocarboxylates

Decyl isonicotiniate and decyl nicotiniate permit a rapid extraction of palladium(II) from its hydrochloride solutions. Decyl picoliniate is not a suitable extractant. 4-Octylphenylamine can act as a phase transfer catalyst when its concentration in the organic phase is at least 2·5 × 10^?4 M . It seems that the interfacial adsorption of pyridine carboxylates and of 4-octylphenylamine is not the decisive phenomenon in palladium(II) extraction. The negligible protonation of the pyridine-type extractants and the phase transfer catalysis explains well the quick extraction of palladium(II) with the commercial and highly hydrophobic extractant ACORGA CLX-50.     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

抽余C_4烃中异丁烯催化逆流水合制叔丁醇

采用大颗粒离子交换树脂催化剂,在φ100mm×10m的反应器中进行了异丁烯催化逆流水合制叔丁醇的中间试验。考察了反应温度、水油体积比和抽余C4烃的流速等对异丁烯转化率的影响。试验结果表明,异丁烯催化逆流水合制叔丁醇的适宜操作条件为:反应温度80~90℃,水油体积比为4~5,抽余C4烃的流速为0.45~0.55mm/s。在此条件下,异丁烯的转化率可达88.8%。工业装置运转结果表明,异丁烯转化率大于75%。     

Air-Oxidation Behavior of a Cu60Hf25Ti15 Bulk Metallic Glass at 375–520 °C

The oxidation behavior of a Cu₆₀Hf₂₅Ti₁₅ bulk metallic glass was studied over the temperature range of 375–520 °C in dry air. The oxidation kinetics of the amorphous alloy generally followed the parabolic law at all temperatures, with an oxidation rate increasing with temperature. The oxidation rates of the amorphous alloy were much higher than those of polycrystalline pure-Cu, implying that the additions of Hf and Ti accelerated the oxidation reaction. The composition of the scales formed on the amorphous alloy was strongly temperature-dependent, since they consisted mostly of Cu₄O₃ and CuO with minor amounts of HfO₂ at T ≤ 450 °C, while mostly CuO with minor amounts of HfO₂ and Cu₂TiO₃ were detected at higher temperatures. In addition, nanocrystalline Cu₅₁Hf₁₄ and Cu₃Ti₂ phases were detected on the substrate after oxidation at T ≥ 450 °C, indicating the occurrence of phase transformation.