A study of PtRuO2 catalysts thermally formed on titanium mesh for methanol oxidation

Platinum-based catalysts, for the electro-oxidation of methanol, have been made by thermal decomposition of chloride precursors onto titanium mesh. The catalysed electrodes were successfully operated in acidic methanol electrolytes. Electrochemical characterisation has been carried out using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic polarisations. A complete analysis of the electrochemical results showed that the preliminary performance of the catalysed titanium mesh was comparable to that achieved with carbon-supported PtRu catalysts. The catalysts formed on titanium mesh by thermal decomposition also exhibited dimensional stability. Catalysed titanium mesh therefore appears to be a promising alternative to carbon-supported catalysts for certain fuel cell applications.     

一种32位浮点型处理器的励磁控制器设计

针对同步发电机励磁控制系统在控制精度和控制稳定性方面存在的不足,通过对国内外励磁控制系统发展状况的分析,提出了一种基于32位浮点型处理器的数字式励磁控制系统.该系统通过将先进的交流采样算法和DSP的优异性能相结合,实现了励磁控制器的深度数字化;通过对同步发电机系统关键模拟量的采集与计算,得出适用于当前工况下触发脉冲角度α.试验验证了该设计能很好地解决发电机励磁控制系统中的稳定性问题.     

15%恶霉灵防治水稻立枯病药效试验

田间试验表明，15％恶霉灵水剂6～8ml／m^2，对水稻立枯病的防效可达82.3％，病指防效可达89.4％，明显好于对照药剂。而且对水稻安全，能够提高秧苗素质。     

卧螺离心机共直流母线双电机双变频驱动

介绍了卧螺离心机差转速自动控制共直流母线变频调速系统的结构,分析了工作原理和节能效果,介绍了直流母线的两种并接方法。     

Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

微小型工业汽轮机智能交流伺服调节系统研究

为了解决微小型工业汽轮机组调节控制系统设备简陋,动态响应和稳态精确度差的问题,提出了一种采用交流伺服电机和模糊PID控制的自动调节系统．在对调节系统部件特性数据进行分析的基础上,应用机理分析法建立了工业汽轮机交流伺服调节系统的数学模型,建立了以模糊PID控制和常规PID为主的控制器仿真模型,并利用MATLAB（SIMULINK）进行了动态仿真．结果表明,采用交流伺服电机作为执行器比传统的机械式调节系统具有更优良的动态和稳态性;采用模糊PID控制策略的调节系统在减少调节时间、改善动态品质方面均好于常规PID调节器．为工业汽轮机交流伺服调节系统的进一步研究提供了理论基础．     

电热爆炸喷涂法制备TiC涂层的特性分析

采用电热爆炸定向喷涂工艺在镍合金基体上制备TiC涂层,借助光学显微镜、显微硬度计分别对涂层显微组织、涂层硬度进行了测试。利用图像分析软件对涂层的晶粒尺寸进行了测量。结果表明,电热爆炸定向喷涂制备的涂层组织晶粒明显细化,涂层组织为典型的快速凝固组织。涂层组织比原始喷涂材料镍合金组织细小、均匀;TiC涂层中大晶粒所占涂层面积为93.6%,小晶粒所占面积为6.4%;大晶粒的弦长平均值为500 nm左右,小晶粒的弦长平均值为81 nm左右;表层有些孔隙;涂层硬度均明显高于基体材料镍合金的硬度,其最高硬度达到了582.5 HV。     

改性AC发泡剂的现状与发展对策

分析AC发泡剂原粉在应用中的一些缺陷;叙述改性AC的种类、改性的途径及我国改性AC的现状研究进展;探讨我国改性AC在品种和应用研究方面与国外的差距;应大力开发改性AC.     

交流电量采集技术在LF炉的应用

介绍交流电量采集系统的设计,及其在LF精炼炉中的应用.     

深度强化学习及在路径规划中的研究进展

路径规划的目的是让机器人在移动过程中既能避开障碍物,又能快速规划出最短路径。在分析基于强化学习的路径规划算法优缺点的基础上,引出能够在复杂动态环境下进行良好路径规划的典型深度强化学习DQN（Deep Q-learning Network）算法。深入分析了DQN算法的基本原理和局限性,对比了各种DQN变种算法的优势和不足,进而从训练算法、神经网络结构、学习机制、AC（Actor-Critic）框架的多种变形四方面进行了分类归纳。提出了目前基于深度强化学习的路径规划方法所面临的挑战和亟待解决的问题,并展望了未来的发展方向,可为机器人智能路径规划及自动驾驶等方向的发展提供参考。