Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

Zr掺杂g-C3N4光催化降解有机污染物

以盐酸胍为前驱体，硝酸锆为锆源，通过热聚合法制备了Zr掺杂的Zr/g-C3N4光催化剂。运用XRD、SEM、UV-Vis DRS、PL、XPS、BET等手段对催化剂的结构、形貌、光学性能进行了表征分析。结果表明：Zr掺杂改性的Zr/g-C3N4光催化剂拓宽了可见光的吸收，增大了比表面积，且降低了光生电子-空穴的复合率，具有较好的光催化活性。可见光照射下，在60 min内，5Zr/g-C3N4对罗丹明B（RhB）的光催化降解率达99.29%，光催化降解过程符合一级动力学方程，其速率常数k= 0.08647 min-1，是纯g-C3N4的8.3倍。捕获剂实验发现降解RhB的主要活性物种为超氧自由基，并推测了可能的反应机理。     

石墨化炉用电阻料的改进

根据对石墨化焦、生焦特性的分析，得知用石墨化焦作电阻料能得到相对均匀的温度场，温度梯度较小。决定大规格电极用石墨化焦来取代混合焦作电阻料，并结合其特性，对曲线进行了改进，在保证品级率的前提下提高了电级的成品率。     

De-oiling contaminated bleaching clay by high-pressure extraction

The disposal and re-use of spent bleaching clay from the vegetable oil processing industry is a problem of growing importance. Although today the only practical way of removal of the spent material is disposal, extraction with organic solvents is a well-known method of de-oiling contaminated bleaching clay. In our investigations we compare the extractibility of two different types of bleaching clays with CO₂ as a solvent. All experiments were carried out with a high-pressure extraction plant. The extraction and separation conditions, temperature and pressure, as well as the CO₂ mass flow, were varied during experiments. The aim of our investigations was a complete separation of the oil from the adsorbent. The latter should then be re-used as bleaching clay. The oil and the bleaching clay were analyzed and tested, respectively. The results show that oil of good quality can be recovered and the bleaching clay still has an activity approximately 50% of fresh clay.     

BaFe12O19/聚氨酯磁性复合微球的制备和表征

通过BaFe12O19硅烷偶联剂改性,聚乙二醇1000、甲苯二异氰酸酯在二甲苯溶液中预聚合,预聚物溶液在分散剂聚乙烯吡咯烷酮K30的水溶液中悬浮聚合,三步合成了BaFe12O19/聚氨酯复合微球.用扫描电镜、红外光谱仪、热重-差示扫描同步热分析仪和振动样品磁强计对微球的形貌、结构、玻璃化温度(Tg)和磁性能进行了表征.结果表明:合成的微球以BaFe12O19颗粒为核聚氨酯为壳.表面分布有微孔,微球粒径在400μm左右,粒径大小可通过控制反应条件调节.微球中磁性物质BaFe12O19的含量为11.11%(质量分数),Tg在290 ℃左右,耐热性能好,微球的饱和磁化强度为3.36×103 A/m,矫顽力为3.06×104 A/m.该复合微球是一种有潜在应用价值的新型血管内栓塞材料.     

石墨材料的疲劳

对迄今前人在石墨材料上所开展的疲劳研究工作进行了综述，以不同的疲劳设计方法为线索，一方面通过对石墨寿命评价的S-N曲线来分析石墨的疲劳行为；另一方面从疲劳裂纹扩展的角度来分析在外应力作用下有预制裂纹的石墨的疲劳行为。总结了石墨疲劳研究的主要进展，归纳了石墨疲劳研究中的关键问题，在此基础上对石墨材料的疲劳研究前景进行了展望。     

加成型硅橡胶灌封料流变性能的研究

研究了加成型硅橡胶灌胶封料的注性能。测定了硅橡胶灌封料的粘度，讨论了配制工艺条件及组份对硅橡胶灌封料流变性能的影响，分析了白炭黑在硅橡胶灌封料中的分散状态，实验结果表明，通过改进配制工艺条件，优化组分，可以制备出满足特定需要并具有高流动性的硅橡胶灌封料。     

在铂催化剂上-氧化碳氧化反应的多定态特性

对铂催化剂上一氧化碳氧化反应的多定态特性进行了实验研究,借助于奇异理论和突变理论,对实验结果进行了分析,找出了系统可能存在的定态数目,并预测出在定态数目不同的操作参数区域内,描述系统状态变量与操作参数的分岔图型式,最后,尝试利用系统的多定态特性识别反应的动力学模型,取得了满意的效果.     

Exafs study of the local structure of Ni in Ni-MoS2/C hydrodesulfurization catalysts

To study the local structure of the Ni promoter atom, the Ni and Mo K edge EXAFS spectra of Ni-MoS₂/C hydrodesulfurization catalyst were measured in an in-situ EXAFS cell at 77 K. The Ni atom is situated in a square pyramid of five S atoms at a distance of 2.21 Å from the S atoms. In addition an EXAFS contribution due to a Mo atom at 2.82 Å from the Ni atom could be identified. This local structure indicates that the Ni atoms are situated on top of the S₄ squares at the MoS₂ edges in millerite-type Ni sites. The Ni atoms are situated in the planes of the Mo atoms and not in the intercalation plane midway between successive MoS₂ sandwich layers.