本征吸除硅片特性研究

本文描述硅本征吸杂片的特性参数,如吸除区宽度、洁净度,氧沉淀密度、MOS电容寿命,介绍了表面态密度及残余间隙氧浓度的检测方法和工艺对参数的影响及参数之间的内在联系,文章还实验论证了不同参数水平对器件成品率的影响,建立了以MOS电容寿命为主导的参数控制方法,利用本文提供的控制参数,可使CCD-512器件成品率达60％,以上优品率≥85％。     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。     

定电流对LED的重要性

高功率超高亮度LED已经开始大量应用.要实际体现LED(尤其是高功率超高亮度LED)的优点,采用定电流驱动方式必要条件之一.     

软起动器在烧结机混料系统中的应用

软起动器以微处理器为核心，能够产生平滑的电压起动曲线，可任意设置稳定的起动电流，并具有多种保护。张钢24m^2烧结机混料系统应用软起动器后，交流电机起动平滑、无噪声，年节电5．6万kW．h，经济效益约2．4万元。     

Multi-grid domain decomposition approach for solution of Navier–Stokes equations in primitive variable form

A new multi-grid (two-grid) pseudospectral element method has been carried out for solution of incompressible flow in terms of primitive variable formulation. The main objective of the proposed method is to apply the multi-grid technique solving the incompressible flow problems associated with three commonly encountered multi-grid environments. In domain decomposition terminology, it includes (I) partially overlapped subdomains, each of which has same types of grids; (II) partially overlapped subdomains, each of which has different types of grids; (III) local adaptive subdomains fully overlapped with the original computational domain (composite grids). The approach for flow problems, complex geometry or not, is to first divide the computational domain into a number of subdomains with the inter-overlapping area (partially or fully overlapped). In categories I and II, the fine-grid or coarse-grid subdomains can be defined by their representation, while in category III the fine-grid or coarse-grid subdomains are defined as usual. Next, implement the Schwarz Alternating Procedure (SAP) to exchange the data among subdomains, where the coarse-grid correction is used to remove the high frequency error that occurs when the data interpolation from the fine-grid subdomain to the coarse-grid subdomain is conducted. The strategy behind the coarse-grid correction is to adopt the operator of the divergence of velocity field, which intrinsically links the pressure equation, into this process. The solution of each subdomain can be efficiently solved by the direct (or iterative) eigenfunction expansion technique or preconditioned method with the least storage requirement, i.e. O(N²) in 2-D. Numerical results of (i) driven cavity flow (Re = 100,400) with Cartesian grids (category I) in each subdomain, (ii) driven cavity flow (Re = 3200) with local adaptive grids (category III) in each subdomain, and (iii) flow over a cylinder (Re = 250) with ‘O’ grids in one subdomain and Cartesian grids in another (category II) will be presented in the paper to account for the versatility of the proposed multi-grid method.     

直流励磁机电刷打火的常见原因及对策

主要介绍了中铝公司山西分公司自备热电厂6台发电机组的励磁机电刷打火的常见原因的分析和处理方法。     

浅谈我国旋转防喷器技术的现状与发展

介绍了我国旋转防喷器技术的发展现状，分析了几种不同类型旋转防喷器的结构特点，指出旋转防喷器的发展方向及其与国外同类技术之间的差距。     

气动冲击器研究现状及发展趋势

阐述了气动冲击旋转钻井用气动冲击器国内外近期的研究现状,以及各类冲击器的结构和性能参数,并提出了气动冲击器的发展趋势。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

爆炸箔起爆系统初始电阻对爆发电流和飞片速度影响的数值模拟

研究了电爆炸箔起爆系统起爆回路初始电阻对爆发电流和冲击片雷管飞片速度的影响规律，分析了影响电爆炸箔起爆系统体系的因素，为在可靠发火条件下降低起爆系统体积提供设计参考。