Process control: An overview and personal perspective

This paper presents an overview and personnal perspective on recent developments and current practice in computer process model. The basic concepts behind conventional process control are reviewed to provide a starting point for the non-control specialist and process engineer. The ensuing sections on Internal Model Control (IMC), Model Predictive Control (MPC) and adaptive control illustrate the evolution of control technology from the traditional multiloop strategies to the modern, multivariable, model-based, computer control systems now being used in industry. The paper does not provide a complete, critical review of process control. However, the discussion and the recommended references should provide a good starting point for anyone wanting to become familiar with current practice and some of the new directions of process control.     

高酸Purex流程镎走向控制及其回收纯化工艺研究

文章介绍用逆流萃取串级实验方法研究高酸Purex萃取流程lA萃取器镎走向控制(与铀、钚共萃取)及自lAP中定量反萃镎、分离铀、钚工艺条件的实验结果。     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.     

热轧左旋螺纹钢的开发

介绍了在轧钢厂二车间开发顾客需要的Φ18、Φ20、Φ22的热轧左旋螺纹钢。在原有Φ18、Φ20、Φ22热轧圆钢的工艺基础之上做工艺设计，经实际生产轧制，其产品质量完全符合顾客要求。     

正交实验优选盐生藻多糖的提取工艺

以盐生藻为原料,盐生藻多糖得率为指标,运用稀酸、稀碱和蒸馏水为提取剂提取盐生藻多糖,得出合适的提取剂为稀酸.进一步的正交实验表明,盐生藻多糖的最适提取工艺为:提取75min,pH=4,固液比为1∶70,温度为95℃.     

论工艺参数对烧结产质量的影响及分析

本文论述了正确认识烧结工艺参数对搞好烧结生产的意义，介绍了烧结工艺参数其及相互关系，详述了烧结主要工艺参数对其产质量的影响，提出了烧结工艺参数认识的几点结论性意见。     

Hydrothermal upgrading of wood biomass: Influence of the addition of K2CO3 and cellulose/lignin ratio

The hydrothermal treatment of two different wood biomass samples such as cherry (hard wood) and cypress (soft wood), whose composition is different i.e. lignin, cellulose and hemicellulose were performed at 280 °C for 15 min with aq. K₂CO₃ with different concentrations (0–1 M). The soft wood biomass contains higher lignin content than hard wood biomass. The cellulose rich cherry wood biomass produced higher proportion of acetic acid than cypress. The lignin rich cypress produced the hydrocarbons with major portion of phenolic hydrocarbons and derivatives than cherry. The total oil yields from both cherry and cypress wood biomass produced 50 wt% of liquid hydrocarbons at 280 °C for 15 min with 0.5 M K₂CO₃ solution. The volatility distribution of liquid hydrocarbons showed the characteristic features of soft and hard wood biomasses.     

Development of a predictive model for polymer/solvent diffusion coefficient calculations

A new calculation procedure for free‐volume parameters is considered in this work by using viscosity prediction methods and the Levenberg‐Marquardt calculation scheme. All parameters used in the Vrentas–Duda free‐volume theory can be estimated from pure component properties. The prediction results are compared with experimental data for some polymer/solvent systems. The diffusion coefficient calculated by Vrentas–Duda theory can be used in the modeling of membrane separation processes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

铒氨基酸固态配合物的光声光谱研究

合成了Er(Gly)3Cl3·3H2O、Er(Ala)3Cl3·3H2O和Er(Gly)3Phen·3H2O二元及三元固态配合物微晶粉末,在300nm～800nm范围内测定并解释了其光声光谱。通过对光声相对强度计算得到铒氨基酸固态配合物的光声支量,讨论了氨基酸配体对中心稀土离子铒f-f跃迁的微扰作用。结合Er(Ala)3Cl3·3H2O配合物的光声光谱和吸收光谱研究了其荧光性质及弛豫模型。     

热焊弯管用钢板工艺探讨

在统计分析、正交多项式回归和模拟试验的基础上，建立了高精度的屈强比预报模型，并运用多元函数极值原理，求导极值点及相应的工艺参数，为优化工艺制度，提高热焊弯管用钢(L360-WG系列)性能合格率提供了定量依据。