基于MCS-51系列单片机时间控制器软件的设计与实现

本文设计的基于MCS-51系列单片机时间控制器主要应用AT89C51作为控制核心,采用实时时钟芯片DSl302、EipROM24C02及动态数码显示相结合。具有硬件电路简单、软件功能完善、控制系统可靠、性价比较高等特点,具有一定的使用和参考价值。     

基于嵌入式技术的倾角传感器检测系统设计

介绍了加速度传感器MMA7260的工作原理、结构及功能,设计了一个基于ARM的实时嵌入式自动检测系统,使用μC/OS-II操作系统,构造一个具有角度测量、相关数据处理以及与上位机通信等功能的现场角度测量单元,上位机则主要完成系统监控和人机交互等功能。     

“项目式教学”在高职《C语言》课程中的应用

本文针对高职C语言课程教学中存在的内容安排不合理、教学方法与手段陈旧、学生厌学等问题,提出基于以以就业为导向、以学生为中心,以项目为载体,以工作任务为驱动,将理论与实践有机结合,使学生在完成任务的过程中掌握知识和技能。同时重视职业素养的养成,充分体现职教课程的特色。     

浅谈自增自减运算符在C语言中的应用

C语言的运算符,操作灵活,其中自增自减运算符的功能较为特别。合理的使用自增自减运算符可以提高程序执行的效率,但同时灵活使用自增自减运算符也是个难点。根据自增自减运算符的特点和不同使用形式,剖析自增自减运算符的使用规则,以便更好地帮助初学者学习和使用自增自减运算符。     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential

Results of experiments performed to isolate the effect of surface roughness generated during slurry erosion-corrosion of 304L stainless steel are presented. Surfaces prepared by grinding to different finishes show that increasing the roughness lowers the pitting potential in chloride solution. Subsequent erosion by an aqueous sand slurry then alters this pitting potential (E_p), as measured in the solution phase alone, in a manner dependent on the initial surface roughness. Surfaces which were initially rougher show a pronounced rise in _p after erosion, while those with an initially smoother finish show a fall in E_p after erosion. Measurement of E_p during erosion-corrosion does not fit either process, with values of _Ep lower than those predicted from the surface roughness alone.     

使用Visual C+ +实现串行通讯

以VisualC 为工具，探讨了在RS-232C接口协议下DTE设备之间通讯的实现问题。     

碳纳米管及稀土元素钇(Y)对高Ni含量Ti(C,N)基金属陶瓷组织与性能的影响

研究了不同含量的碳纳米管及0.8%稀土Y对高Ni含量Ti(C,N)基金属陶瓷组织性能的影响.将不同成分的试样分别于1400℃、1410 ℃、1420℃真空烧结,测试抗弯强度、洛氏硬度,观察背散射电子形貌、断口形貌并做能谱分析.结果表明,加入质量分数(下同)为0.8%Y及0.3%～1.0%的碳纳米管时,碳纳米管含量为0.5%的组织较均匀,芯壳结构明显,抗弯强度及硬度均较高.     

曲轴R处缺陷的超声探伤及定位问题的研究

针对曲轴R处缺陷的探伤和定位问题进行了探讨和研究,并设计了能对缺陷进行实时定位的程序.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.