复杂条件下发挥锚杆支护作用的相关技术

介绍了在特殊地质和开采条件下,发挥锚杆支护作用的几种相关技术。     

Modelling of fatigue damage progression and life of CFRP laminates

A progressive fatigue damage model has been developed for predicting damage accumulation and life of carbon fibre‐reinforced plastics (CFRP) laminates with arbitrary geometry and stacking sequence subjected to constant amplitude cyclic loading. The model comprises the components of stress analysis, fatigue failure analysis and fatigue material property degradation. Stress analysis of the composite laminate was performed by creating a three‐dimensional finite element model in the ANSYS FE code. Fatigue failure analysis was performed by using a set of Hashin‐type failure criteria and the Ye‐delamination criterion. Two types of material property degradations on the basis of element stiffness and strength were applied: a sudden degradation because of sudden failure detected by the fatigue failure criteria and a gradual degradation because of the nature of cyclic loading, which is driven by the increased number of cycles. The gradual degradation of the composite material was modelled by using functions relating the residual stiffness and residual strength of the laminate to the number of cycles. All model components have been programmed in the ANSYS FE code in order to create a user‐friendly macro‐routine. The model has been applied in two different quasi‐isotropic CFRP laminates subjected to tension–compression (T–C) fatigue and the predictions of fatigue life and damage accumulation as a function of the number of cycles were compared with experimental data available in the literature. A very good agreement was obtained.     

Two-stage fatigue loading of woven carbon fibre reinforced laminates

A brief review of the models used to predict the cumulative fatigue damage in FRP composites is presented. Two‐stage fatigue loading of a [0/90,± 45₂,0/90]_s quasi‐ isotropic woven carbon fibre/epoxy resin laminate was evaluated at stress ratio R = 0.05 and the failure mechanisms investigated using x‐radiography after each loading stage. The results are presented in terms of fatigue strength and damage growth and are compared with those in the literature. A low‐to‐high loading sequence is more damaging than a high‐to‐low one and the Palmgren‐Miner linear damage rule may no longer be valid for this kind of material, as previously reported.     

A Tale of Two Cities: Financing Two Voucher Programs for Substance Abusers Through Community Donations.

Voucher-based reinforcement therapy (VBRT) is an effective drug abuse treatment, but the cost of VBRT rewards has limited its dissemination. Obtaining VBRT incentives through donations may be one way to overcome this barrier. Two direct mail campaigns solicited donations for use in VBRT for pregnant, postpartum, and parenting drug users in Toronto, Ontario, Canada, and in Los Angeles, California. In Toronto, 19% of those contacted over 2 months donated $8,000 ($4,000/month) of goods and services. In Los Angeles, nearly 26% of those contacted over 34 months donated $161,000 ($4,472/month) of goods and services. Maintaining voucher programs by soliciting donations is feasible and sustainable. The methods in this article can serve as a guide for successful donation solicitation campaigns. Donations offer an alternative for obtaining VBRT rewards for substance abuse treatment and may increase its dissemination. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

隧道受震破壞調查分析與修復管理案例

就隧道震後之災損模式進行統計與災損原因研判,並利用數值分析方法研判安全性,就結構加固等改善措施之設計考量作詳細說明;另由於隧道結構物的損壞範圍大,且修復經費受限,必須藉由定期檢测進行長期維護管理,以防範意外發生。於此,利用Vidco-GIS自動化影像地理资訊系統之e化新技術,以動態及靜態影像紀錄隧道災損狀況,同時亦整合建置前期設計、施工圖及定期維護等資料,相關成果以資料庫方式纳入日常維護管理,以有限人力有效率地進行維護管理紀錄並随時掌握現況供作決策之明確參考。     

岳城水库供水工程贴边岔管设计

岳城水库供水工程， 邯郸、安阳两城市引水岔管均采用内、外贴边补强板型式对取水口进行局部加强。此补强方法对水流流态干扰较少， 水头损失小。设置这样的岔管对原电站压力钢管结构改动较小， 构造相对简单， 制作与安装方便， 对岳城水库供水这样的改建工程较为适用。     

浅谈多层建筑的斜屋面结构设计

多层建筑的斜屋面结构，应建立合理的结构模型，选用合理的结构方案，在采用结构软件设计时，一定要正确采用倾斜构件沿水平或垂直方向的荷载。     

影响长廊阻抗式调压室配筋的几个因素分析

采用三维非线性有限元方法,对四川天全县干溪坡水电站调压室结构特性进行研究,并对几个影响配筋的因素进行敏感性分析,得出各个因素对配筋结果的影响,为调压室结构设计提供科学依据。     

Finite element micromechanical modelling of unidirectional fibre-reinforced metal-matrix composites

Typical finite element formulations and models for unidirectional composite materials are reviewed. The application of micromechanical finite element analysis to the modelling of unidirectional fibre-reinforced metal-matrix composites is demonstrated by presenting some studies from recent publications. It is shown that while analytical models offer a simple tool for obtaining the overall response of composites, finite element analysis provides more accurate and detailed characterisation of composite properties for complicated geometries and constituent property variations. Various effects that influence the stress/strain response and fibre/matrix deformation of composites are studied through modelling. These effects include the fibre coating and reaction layer, fibre shape and distribution, metallurgical and environmental factors, stress distributions and damage. It is demonstrated that the properties and constituent phase interaction of metal-matrix composites are best modelled by finite element analysis. It is emphasized that in order to obtain good predictions, the models must be coupled with first-hand characterisations of the constituent phases and their interactions, including the thermal history of the specimens.     

离子束增强沉积薄膜合成及其在材料表面优化中的应用

作者在多年实验工作的基础上，论述了离子束增强沉积薄膜合成及其在材料表面优化中的应用、所用设备、膜的合成、表面优化技术与机理，并展望了前景。