On the relationship between pore structure and chloride diffusivity from accelerated chloride migration test in cement-based materials

In this study the electrochemical technique is applied to accelerate chloride ion migration in concrete to determine the chloride ions in anode cell, and the pore characteristic of the same mortars in concrete was obtained from the mercury intrusion porosimetry (MIP). The plain ordinary Portland cement and the constant aggregate with eight w/c ratios ranging from 0.3 to 0.65 were used. A good linear relationship between the steady-state migration coefficient and non-steady-state migration coefficient based on the same experimental setup and specimens was obtained. Both of the steady-state migration coefficient and non-steady-state migration coefficient were linearly related to the capillary pore volume and the critical pore diameter.     

海明滴定法快速测定废水中的LAS含量

介绍了一种测定废水中LAS浓度的新方法。克服了常规方法亚甲基蓝比色法要绘制标准曲线，操作过程复杂等局限性。该方法测定过程简单，结果准确，标准偏差为1．4l，变异系数为3．92％。     

Groundwater as a source and pathway for road salt contamination of surface water in the Lake Ontario Basin: A review

In Ontario, there is limited comprehensive research regarding the contribution of chloride in groundwater to surface water systems. The delivery of chloride via groundwater can contribute to the degradation of the Great Lakes and their tributaries. Thus, this review intends to fill or identify knowledge gaps regarding assessing groundwater as a potential source of road salt, the single largest use of salt in urban cold region environments, contamination to surface water by synthesizing existing groundwater chloride research in the Lake Ontario Basin. Knowledge regarding source characterization, properties, pathways, and impacts of chloride in the environment is essential to evaluate the contribution of chloride via groundwater. Past groundwater chloride research in the basin is primarily concentrated in highly urbanized areas and has identified localized trends of increasing groundwater chloride concentrations in these regions; however, few investigations have been conducted in varying land uses (e.g., rural or less urbanized watersheds) or at sufficient temporal and/or spatial scales. Significant chloride accumulation is occurring in watersheds and aquifers within the basin. Concentrations are expected to increase until equilibrium is obtained, thus resulting in sustained yearlong elevated concentrations in tributaries. Recently, chloride loading to Lake Ontario has increased significantly, with groundwater inputs having the potential to support long-term increases in chloride concentrations in the lake. However, few studies have evaluated the explicit contribution via groundwater to Lake Ontario, and therefore a knowledge gap continues to exist. We provide a synthesis of additional research priorities to better understand the magnitude of groundwater chloride issues in the basin.     

Process development for the removal of copper from wastewater using ferric/limestone treatment

The removal of copper from wastewater by ferric/limestone coagulation followed by screen filtration was carried out at a laboratory scale. The optimum coagulant (FeCl₃) dose and working pH were 50 mg// of Fe(m) and pH 7.5, respectively, through jar tests. For the efficient removal of copper from wastewater, we developed a novel process including the co-precipitation of copper with FeCl₃, alkalization in a limestone aeration bed, and separation of precipitates in a sedimentation tank coupled with internal stainless steel screen filter. The performance results showed that removal of copper from the solution was over 99.5%. The pH was effectively maintained over 7.5 in limestone bed during the whole process. Ferric hydroxide/copper aggregates were removed over 99% by stainless steel screen filter of 1,450 mesh. Periodic air backwashing alleviated fouling of the filter surface.     

Reactive pozzolana from Indian clays—their use in cement mortars

Studies were undertaken to produce reactive pozzolana i.e. metakaolin from four kaolinitic clays collected from different sources in India. The metakaolin produced from these clays at 700-800 °C show lime reactivity in between 10.5 to 11.5 N/mm² which is equivalent to commercially available calcined clay Metacem-85. The microstructure of the metakaolin has been reported. The effect of addition of metakaolin up to 25% in the Portland cement mortars was investigated. An increase in compressive strength and decrease of porosity and pore diameter of cement mortars containing metakaolin (10%) was noted over the cement mortars without metakaolin. The hydration of metakaolin blended cement mortars was investigated by differential thermal analysis (DTA) and scanning electron microscopy (SEM). The major hydraulic products like C-S-H and C₄AH₁₃ have been identified. Durability of the cement mortars with and without metakaolin was examined in different sulphate solutions. Data show better strength achievement in cement mortars containing 10% MK than the OPC mortars alone.     

电石生产项目的环境保护措施

密闭电石炉生产过程中产生的炉气必须经过净化除尘综合利用，针对全密闭式电石炉炉气净化问题，论述了3种环保措施。     

水化放热曲线在研究铝酸钙水泥和浇注料中的应用

为了预测水泥或浇注料的凝结性和强度发展趋势,取1500g按一定程序搅拌好的水泥胶砂或浇注料,迅速倒入模具中,振动10s后置入j-型热电偶,由计算机绘制出其水化放热曲线。浇注料的水化放热曲线形貌不仅能反映水泥的矿物组成和反应活性,而且能反映浇注料中其他原材料(如骨料、氧化铝或二氧化硅微粉和外加剂等)和作业环境对水泥及浇注料的影响,为此可用于水泥与浇注料流变特性的研究和控制,同时也为浇注料用原材料的甄选提供了一种有用的工具。     

Acid rain effects on the exterior durability of architectural coatings on wood

Acid rain is an important consequence of pollutants generated by modern industrial societies and is known to cause damage to ecological systems, construction materials and cultural artifacts. The assessment of the damage caused to paint films has included laboratory, exposure chamber, and exterior weathering experiments. This study uses visual assessment of paints applied directly to southern yellow pine and exposed at 30° south to either natural acid rain or deionized water spray sites in North Carolina and Ohio to determine damage by acid rain. An acrylic latex paint with a pigment volume concentration (PVC) of 52 and a volume solids (VS) of 35% was formulated with calcium carbonate or sodium potassium alumino-silicate extenders. This high PVC paint formulation is one known to stress the binding capacity of the latex and thus produce early grain cracking failures over bare wood. Major effects observed include severe yellowing and increased mildewing of the carbonate containing paints exposed to acid rain. While acid rain can damage exterior paints, much of the damage can be minimized by careful selection of the polymers and pigments used in the formulation.     

Differentiating seawater and groundwater sulfate attack in Portland cement mortars

The study reported in this article deals with understanding the physical, chemical and microstructural differences in sulfate attack from seawater and groundwater. Portland cement mortars were completely immersed in solutions of seawater and groundwater. Physical properties such as length, mass, and compressive strength were monitored periodically. Thermal analysis was used to study the relative amounts of phases such as ettringite, gypsum, and calcium hydroxide, and microstructural studies were conducted by scanning electron microscopy. Portland cement mortars performed better in seawater solution compared to groundwater solution. The difference in performance could be attributed to the reduction in the quantity of the expansive attack products (gypsum and ettringite). The high Cl concentration of seawater could have played an important role by binding the C₃A to form chloroaluminate compounds, such as Friedel's salt (detected in the microstructural studies), and also by lowering the expansive potential of ettringite. Furthermore, the thicker layer of brucite forming on the specimens in seawater could have afforded better protection against ingress of the solution than in groundwater.     

Oxidative coupling of methane over Na+-ZrO2-C1-/Al2O3 catalysts

Oxidative coupling of methane (OCM) was carried out over Na⁺-ZrO₂-Cl /A1[₂O₃ catalysts in a temperature range from 1023 to 1123 K. The catalysts were prepared by impregnating the α- or γ-Al₂O₃ supports with sodium carbonate and/or zirconyl chloride. The OCM activity was examined using the catalysts prepared by three different preparation procedures. The best catalyst was the one prepared by subsequent impregnation of sodium carbonate-preimpregnated γ-Al₂O₃ with a mixed solution of sodium carbonate and zirconyl chloride. It was found that preimpregnated sodium played an important role in reducing the combustion activity of the γ-Al₂O₃. The catalyst with an optimal composition showed the highest C₂ selectivity and yield of 40.8% and 15.1%, respectively. From the X-ray diffraction analysis it was found that tetragonal ZrO₂ was formed and that NaCl existed in the catalysts with relatively high sodium contents.