圆坯连铸GCr15SiMn的成分偏析和接触疲劳寿命研究

利用金属原位分析技术和钻孔化学分析方法对高淬透性轴承钢GCr15SiMn的Φ450 mm连铸圆坯和Φ130 mm圆钢的C、Si、Mn、Cr元素横截面的分布情况进行分析。采用推力片式接触疲劳试验机进行了材料的接触疲劳寿命测试。结果表明：GCr15SiMn连铸圆坯C元素的偏析倾向较大,易产生中心正偏析,而Cr、Si、Mn元素的偏析倾向较小。通过采取稳定低过热度浇铸、三段强电磁搅拌等措施,铸坯的中心碳偏析得以改善。采用(1240±20)℃×5 h高温扩散、初轧首道次变形量≥90 mm大变形轧制的Φ130 mm圆钢的碳偏析可以得到进一步的改善,试验钢在5.3GPa高应力负载下的接触疲劳额定寿命L₁₀达到3.58×10⁶次,接近电渣重熔钢的水平。     

产学研紧密合作开发新型相变塑性钢——祝贺上海市金属学会成立50周年

阐述了相变诱发塑性钢的特性及其在先进汽车用钢中的重要作用.举例说明了鞍山钢铁公司和上海大学在产学研结合的模式下成功进行了不同等级相变塑性钢的研发.     

非调质钢的合金设计与热加工工艺及性能

论述了非调质钢的性能特点，分析了V、Nb、Ti、Mn、Cr、Si等常用合金元素对非调质钢组织和力学性能的影响，并对热加工工艺、热处理等因素个性能的影响作了分析和讨论。     

裂解气全分析方法研究

针对目前国内裂解气全分析现状，综合各家所采用的方法，提出了切实可行的裂解气全分析方法，解决了裂解气采样、分析方面的困难。     

Studies on high-performance blended/multiblended cements and their durability characteristics

Number of blends were prepared by intergrinding clinker, gypsum, fly ash, calcined clay, microsilica and limestone in laboratory ball mill in varying percentages, and their physical properties such as fineness, consistency, setting time and compressive strength have been determined. The durability tests on selected compositions were also conducted by exposing the mortar cubes separately in 5% Na₂SO₄ and 5% NaCl solutions till the age of 90 and 180 days. The performance was observed by compressive strength development criteria after various length of exposure. Results have been discussed and found that the durability of blended cement is higher than the ordinary Portland cement.     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

干熄焦循环气体成分的分析和控制

分析了干熄焦循环气体成分，针对可燃气体成分爆炸的极限值，控制及制定循环气体成分的指标。     

Self-scaling cooperative discovery of service compositions in unstructured P2P networks

We propose an efficient technique for improving the performance of automatic and cooperative compositions in unstructured Peer-to-Peer networks during service discovery. The technique exploits a probabilistic forwarding algorithm that uses different sources of knowledge, such as network density and service grouping, to reduce the amount of messages exchanged in the network. The technique, analysed in several network configurations by using a simulator to observe resolution time, recall and message overhead, presents good performance especially in dense and large-scale service networks.     

多矿物粘土基陶瓷地砖

以易熔粘土为基，并引入难熔粘土和熔剂成分，合成了地砖坯料。经研究确定，只要遵循一定的条件，是可以用上述原料生产出优质产品的。指出了制品结构和相组成的形成特点。     

基于EDA的《计算机组成原理》教学改革探讨

通过对计算机组成原理教学现状的分析,提出基于EDA的《计算机组成原理》教学改革,并将方案应用在运算器ALU的教学实践中。该方案解决教学现状中存在的问题,提高学生的学习兴趣．培养学生的工程实践能力和创新能力．实现教学效果和教学质量的提高．对计算机组成原理教学改革具有重要的意义。