测定外延层电阻率的面接触方法研究

评论了美国科学家C.C. Allen等于1966年发表的“测定外延层电阻率的点接触方法”之论文的局限性,从而提出了本方法。本方法从理论上解一维Poisson方程并与C.C。Allen法的公式相比较,获得某些公式。文中导出了面接触方法雪崩击穿电压V_(Ba)~∞(V)及点接触方法雪崩击穿电压V_(Bp)~∞(V)的比值为V_(Ba)~∞=0.456;同时还导出了点接触方法外延层耗尽层宽度为t_(min p)(μm)和面接触方法外延层耗尽层宽度t_(mina(μm)的比值为t_(minp)/t_(mina)=2.565。在实践上,为证实两种模型的功能,利用两种探针进行了对比测试。一种是通常被采用的点接触锇尖探针:另一种是利用φ0.8±0.1mm的银针,在银针顶上吸上φ0.4±0.1mm的汞球,以实现面接触。理论和实验吻合良好。     

减震油弹性模量及疲劳特性试验台设计与实现

油液的体积弹性模量以及疲劳特性参数是油液非常重要的物理参数,在液压系统中,直接影响系统的稳定性和动态品质.研究设计了弹性模量及疲劳特性参数测试试验台,基于弹性模量的定义对弹性模量进行测量计算,同时以专用车辆油气悬挂装置为对象,对悬挂内液压油疲劳特性参数进行测试,如:温度、粘度等.完成控制系统以及数据采集系统的设计,与上位机实时通讯,实现测试过程的自动化.     

A Continuum Mechanics Approach for Crack Initiation and Crack Growth Predictions

Very often, different approaches are used for crack initiation and crack growth predictions. The current article introduces a recently developed approach that can be used for the predictions of both crack initiation and crack propagation. A basic assumption is that both crack nucleation and crack growth are governed by the same fatigue damage mechanisms and a single fatigue damage criterion can model both stages. A rule is that any material point fails to form a fresh crack if the total accumulated fatigue damage reaches a limit. For crack initiation predictions, the stresses and strains are obtained either directly from experiments or though a numerical analysis. For the prediction of crack growth, the approach consists of two steps. Elastic‐plastic stress analysis is conducted to obtain the detailed stress‐strain responses. A general fatigue criterion is used to predict fatigue crack growth. Compact specimens made of 1070 steel were experimentally tested under constant amplitude loading with different R‐ratios and the overloading influence. The capability of the approach to predict both crack initiation and the crack growth under these loading conditions was demonstrated by comparing the predictions with the experimental observations.     

Stresses in bent copper tubing: Application to fatigue and stress-corrosion cracking failure mechanisms

The residual and applied stresses in u-bent copper tubing are addressed in the context of both cyclic fatigue and stress-corrosion cracking. Failures as a result of fatigue and stress corrosion cracking in u-bent copper tubing have been observed to initiate at nonintuitive locations when only the applied stresses on the component are considered. This paper presents both qualitative classical and quantitative finite-element stress analysis results for the forming of u-bends. The resulting residual stress distributions are compared to fracture patterns generated by both fatigue and stress-corrosion cracking mechanisms.     

Time derivative equations for mode I fatigue crack growth in metals

Predicting fatigue crack growth in metals remains a difficult task since the available models based on the Paris law are cycle-derivative equations (da/dN), while service loads are often far from being cyclic. This imposes a cycle-reconstruction of the load sequence, which significantly modifies the load history in the signal. The main objective of this paper is therefore to propose a set of time-derivative equations for fatigue crack growth in order to avoid any cycle reconstruction. The model is based on the thermodynamics of dissipative processes. Its main originality lies in the introduction of a supplementary state variable for the crack, which allows describing continuously the state of the crack throughout any complex load sequence. The state of the crack is considered to be fully characterized at the global scale by its length a, its plastic blunting ρ, and its elastic opening. In the equations, special attention is paid to the elastic energy stored inside the crack tip plastic zone, since, in practice, residual stresses at the crack tip are known to considerably influence fatigue crack growth. The model consists finally in two laws: a crack propagation law, which is a relationship between dρ/dt and da/dt and which observes the inequality stemming from the inequality of Clausius Duhem, and an elastic–plastic constitutive behaviour for the cracked structure, which provides dρ/dt versus load and which stems from the energy balance equation. The model was implemented and tested. It successfully reproduces the main features of fatigue crack growth as reported in the literature, such as the Paris law, the stress ratio effect, and the overload retardation effect.     

Fatigue life calculation by means of the cycle counting and spectral methods under multiaxial random loading

The paper contains a new algorithm for estimation of fatigue life in HCF regime under multiaxial random loading using spectral methods. Loading of Gaussian distribution and narrow‐ and broad‐band frequency spectra were assumed. Various characteristic states of multiaxial loading were considered. The equivalent stress history was determined with use of the failure criteria of multiaxial fatigue based on the critical plane. For determination of the critical plane position, the method of variance was applied. During simulation, the authors compared the results obtained by a spectral method in the frequency domain with those from the rain‐flow algorithm in the time domain. The paper also contains the results of fatigue tests for 18G2A structural steel subjected to bending and combined bending with torsion. The tests were performed in order to verify the proposed algorithms for determination of fatigue life. It has been shown that under multiaxial random loading results of fatigue life calculated according to the considered algorithms in frequency and time domains are well correlated with the results of experiments.     

The AC losses measurement and analysis of superconducting NbTi CICC for HT-TU superconducting Tokamak

Superconducting TF and PF coils have been measured in SULTAN test facility. Segregated copper strands are included in four NbTi CICC and this is a technical innovation. Two AC losses measurement methods, calorimetric and electromagnetic methods, have been used in the experiments, and a broad frequency range (from 0.05 Hz to 6 Hz) is covered in sample test. The purpose of this experiment was to investigate AC losses of TF and PF CICC conductor including segregated copper and to check the design of PF and TF CICC coated with different resistive barriers (Pb-30Sn-2Sb and Ni plating on NbTi strands).     

世界核电设备与结构将长期面临的一个问题--微动损伤

核电设备至仍面临许多不易解决的问题,经过对核电和结构部件多例事故的分析可知,核电设备中微动是不可避免的现象,核能工程中的相当一部分结构损伤事故与和微动损伤有着直接的关系;在反应力集中,腐蚀部位,微动又是许多核电设备提前损伤失效的直接原因。     

Long COVID: Association of Functional Autoantibodies against G-Protein-Coupled Receptors with an Impaired Retinal Microcirculation

Long COVID (LC) describes the clinical phenotype of symptoms after infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Diagnostic and therapeutic options are limited, as the pathomechanism of LC is elusive. As the number of acute SARS-CoV-2 infections was and is large, LC will be a challenge for the healthcare system. Previous studies revealed an impaired blood flow, the formation of microclots, and autoimmune mechanisms as potential factors in this complex interplay. Since functionally active autoantibodies against G-protein-coupled receptors (GPCR-AAbs) were observed in patients after SARS-CoV-2 infection, this study aimed to correlate the appearance of GPCR-AAbs with capillary microcirculation. The seropositivity of GPCR-AAbs was measured by an established cardiomyocyte bioassay in 42 patients with LC and 6 controls. Retinal microcirculation was measured by OCT–angiography and quantified as macula and peripapillary vessel density (VD) by the Erlangen-Angio Tool. A statistical analysis yielded impaired VD in patients with LC compared to the controls, which was accentuated in female persons. A significant decrease in macula and peripapillary VD for AAbs targeting adrenergic β2-receptor, MAS-receptor angiotensin-II-type-1 receptor, and adrenergic α1-receptor were observed. The present study might suggest that a seropositivity of GPCR-AAbs can be linked to an impaired retinal capillary microcirculation, potentially mirroring the systemic microcirculation with consecutive clinical symptoms.