采用量化MCLT变换系数的音频数字水印盲检算法

提出了量化 MCLT 变换系数的音频数字水印盲检新算法。嵌入的水印为视觉可辨的二值标志图像,对水印降维处理后,利用密钥通过 PN 序列发生器产生的伪随机序列调制水印信息,然后通过量化 MCLT 系数的方法将其嵌入音频中。通过大量实验,得到了决定水印鲁棒性和不可感知性的量化参数选择上限。实验结果表明,该算法对所嵌水印的音频质量未见降低,对信号处理和随机裁剪型的攻击具有很高的鲁棒性。     

A review of modeling approaches for oriented semi-crystalline polymers

Modeling changes in the physical properties of oriented semi-crystalline polymer films is beneficial for understanding the fundamentals associated with structure property relationships and could be used for developing new polymer films with significantly enhanced physical properties. Relating the molecular changes observed in oriented polymer films to inherent polymer characteristics provides valuable insight for the development of new polymers which exhibit enhanced physical properties upon orientation. Modeling efforts will be reviewed that have attempted to use fiber composite theory to explain the transitions seen during the orientation process.     

Application of Fourier Analysis to Digital Imaging for Particle Shape Analysis

The shape of aggregates has an important influence on the behavior of civil engineering materials. Digital imaging techniques provide unique opportunities for describing these features in an automated fashion. Shape analysis of fine and coarse aggregate particles is investigated in this study using Fourier transform of digital images. The geometric signature of each shape is extracted by measuring the distance between its centroid and the boundary at constant increment of angles, and Fourier transforms are used to evaluate its spectral information. The number of highest amplitude harmonics required for accurate profile regeneration is evaluated. Shape of a given aggregate particle is reconstructed using inverse Fourier transforms considering a limited number of significant harmonics. A parameter that can quantify the error between regenerated and original profiles is proposed. Using this value, two shape parameters are defined to describe the overall shape and the ruggedness of a particle. A procedure of quantitatively describing the roundness/angularity of aggregate shape is presented and extended to three dimensions using orthogonal views.     

Numerical investigation on the heat transfer characteristics of a liquid-metal pool subjected to a partial solidification process

The main purpose of this paper is to investigate numerically the effects of solidification on the heat transfer characteristics of the liquid metal layer, for use in accident analyses. The situation is very similar to an overlying liquid melt pool that could be fooned in the reactor lower head during the late phase of a severe nuclear accident. Based on a computational model, MPCOOL, the numerical predictions were then assessed through a comparison with the experimental data that was obtained with various boundary temperature conditions and geometrical aspect ratios, especially for the Ra-Nu relationship. For the cases with solidification, the results of the comparison show that(a) the computational model does show a good agreement with heat transter rates inferred from the experimental data, with a few exceptions at the Ra numbers which suggest a turbulent transport; and also (b) the computational model underpredicts the heat transfer rates by about 6% than that inferred from the experimental data when it is integrally evaluated with the Ra-Nu correlation. The foregoing results are mainly due to the currently limited applicability of the computational model up to the laminar-to-turbulence transition flows and its application to the turbulence flows because it is always subjected to a model uncertainty between the laminar and turbulence. Next, an additional comparison for the cases with and without solidification was made to examine the effects of the solidification on the energy partition within the liquid metal layer and its effects on the directional heat transfer rates. The results of the comparison show that the computational model for the case without solidification predicts higher heat transfer rates by about 15% than when solidification is included, but there isn't any experimental data that directly supports this trend.     

An electron beam lithography and digital image acquisition system for scanning electron microscopes

A low‐cost microcontroller based control and data acquisition unit for digital image recording of scanning electron microscope (SEM) images and scanning electron microscope based electron beam lithography (EBL) is described. The developed microcontroller low‐level embedded software incorporates major time critical functions for image acquisition and electron beam lithography and makes the unit an intelligent module which communicates via USB with the main computer. The system allows recording of images with up to 4096 × 4096 pixel size, different scan modes, controllable dwell time, synchronization with main power frequency, and other user controllable functions. The electron beam can be arbitrary positioned with 12‐bit precision in both dimensions and this is used to extend the scanning electron microscope capabilities for electron beam lithography. Hardware and software details of the system are given to allow its easy duplication. Performance of the system is discussed and exemplary results are presented.     

基于软件无线电通信平台的高效信道化MSK系统

为了解决软件无线电平台中的数字上下变频技术,包括频谱的搬移和抽样率的转换,克服现有专用器件在实现这些功能中的不是,在分析高效宽频带变频系统的基础上把变频部分与MSK调制方式灵活地结合在一起,有利于在实际中进一步推广到各类调制方式中,从而实现软件无线电的高效数字变频调制解调．     

冶金企业中网络数据信息安全研究

研究了冶金企业数据信息对内对外的安全性：数据信息对外的安全性通过防火墙和虚拟专用网技术(VPN)实现，对内的信息安全通过数据加密和数字签名技术来保证。文中重点研究了数据加密技术和数字签名技术，并给出了混合加密和数字签名联合使用的实现策略，该策略已在数家冶金企业中实施并得到检验。     

数字信息可视化及其实现方法研究

本文首先提出研究数字信息可视化技术的意义,然后对数字信息可视化含义作出解释,并对数字信息可视化实现方法进行分类阐述,最后列举了数字信息可视化技术的新进展。     

用于核电厂数字化仪表控制系统优化设计的CATIA 2程序的改进

对压水堆核电厂瞬态仿真程序CATIA 2程序进行了改进,以满足核电厂数字化仪表控制系统优化设计工作的需要.主要的改进是在CATIA 2程序中,对ΔT保护通道引入了数字化采样模块模型及数字化处理时间步长,以及对ΔT保护通道所用的输入变量引入了采样时间步长,并针对数字化技术提出了一种新的超温ΔT定值方程模型.通过分析比较数值仿真的结果,表明所做的改进是合理和可行的.     

低温核供热堆保护系统的研究

高可靠性的保护系统是核供热堆安全可靠运行的重要保证。本文介绍了围绕核供热堆保护系统所开展的设计和研究工作。着重讨论了核供热堆的安全特性;保护系统的功能,保护参数的选择以及保护系统的基本结构。最后简要介绍了目前正在进行的一种新型保护系统的设计方案。