近终型金属铸造模具制造工艺设计分析与应用

近终型制模技术，可以缩短制模周期、降低生产成本。本文介绍近终型技术在制模工艺实际中的应用概况。并举出实例，指出近终型制模技术可以提高生产效率，快捷地制造出各种复杂的零件/金属模具，该技术有着广阔的应用前景。     

变频开关电源Fuzzy-PID控制器的设计

针对感应式变频开关电源在对金属材料进行热处理过程中，负载的等效参数和谐振频率发生变化，而变频电源的输出频率不能及时调整和跟踪的问题，结合PID和Fuzzy控制技术的优点，设计Fuzzy-PID控制器对变频电源进行控制，在大偏差时用Fuzzy控制，在小偏差时用PID调节。Fuzzy-PID控制器以单片机8098为核心，采用SPWM专用芯片SA4828，实现变频开关电源的电压、电流双闭环控制，使变频电源不仅具有较快的动态响应、更小的超调，并且具有较高的稳态精度和频率跟踪控制特性。     

麝香体系结晶分离研究

研究了根据酮麝香、1,3-二甲基-2,4-二硝基-5-叔丁基苯晶体生长速度的不同,从对二者均达到饱和的溶液中分离得到1,3-二甲基-2,4-二硝基-5-叔丁基苯晶体的过程,计算了晶体生长速度并进行了实验验证。     

双基推进剂硝胺脱湿及其键合剂分子设计

针对双嘶推进剂的能量的民力学性能降低的矛盾，阐述了ＲＤＸ、ＨＭＸ等环硝胺的脱湿现象。键合剂的选择与设计的难度，键合剂的分子主主其相关技术，键合剂的合成探索等问题。     

管道化溶出系统中大型套管式换热器的热补偿设计及组焊

以单内管套管式换热器为例 ,分析了管道化溶出系统大型套管式换热器热补偿的设计方法 ,重点分析了内外管膨胀差的补偿及其弯管部分的结构设计。另外 ,对一些与热补偿相关的结构 ,如封闭环的设置也进行了必要的分析     

Double auction mechanisms on Markovian networks

This paper studies the double auction (DA) mechanism in Ma and Li (2011) for a class of exchange economies. We extend their results to more general cases where sellers and buyers each form a complex time non-homogeneous Markovian chain, as specified in Ram et al. (2009), in the communication of their private information. A numerical example is also provided. Both bubbles and crashes are observed in the example, consistent with results of our theorems. Our example and theoretical results provide new evidence that a DA mechanism, widely utilized in real exchange markets, may contribute to the excess volatility identified in Shiller (1981) and LeRoy and Porter (1981).     

Biomimetic strain hardening in interpenetrating polymer network hydrogels

In this paper, we present the systematic development of mechanically enhanced interpenetrating polymer network (IPN) hydrogels with Young's moduli rivaling those of natural load-bearing tissues. The IPNs were formed by synthesis of a crosslinked poly(acrylic acid) (PAA) network within an end-linked poly(ethylene glycol) (PEG) macromonomer network. The strain-hardening behavior of these PEG/PAA IPNs was studied through uniaxial tensile testing and swelling measurements. The interaction between the independently crosslinked networks within the IPN was varied by (1) changing the molecular weight of the PEG macromonomer, (2) controlling the degree of PAA ionization by changing pH, and (3) increasing the polymer content in the PAA network. Young's moduli and the maximum stress-at-break of the swollen hydrogels were normalized on the basis of their polymer content. Strain hardening in the IPNs exhibited a strong dependence on the molecular weight of the first network macromonomer, the pH of the swelling buffer, as well as the polymer content of the second network. The results indicate that the mechanical enhancement of these IPNs is mediated by the strain-induced intensity of physical entanglements between the two networks. The strain can be applied either by mechanical deformation or by changing the pH to modulate the swelling of the PAA network. At pHs below the pK_a of PAA (4.7), entanglements between PEG and PAA are reinforced by interpolymer hydrogen bonds, yielding IPNs with high fracture strength. At pHs above 4.7, a “pre-stressed” IPN with dramatically enhanced modulus is formed due to ionization-induced swelling of the PAA network within a static PEG network. The modulus enhancement ranged from two-fold to over 10-fold depending on the synthesis conditions used. Variation of the network parameters and swelling conditions enabled “tuning” of the hydrogels' physical properties, yielding materials with water content between 58% and 90% water, tensile strength between 2.0 MPa and 12.0 MPa, and initial Young's modulus between 1.0 MPa and 19.0 MPa. Under physiologic pH and salt concentration, these materials attain “biomimetic” values for initial Young's modulus in addition to high tensile strength and water content. As such, they are promising new candidates for artificial replacement of natural tissues such as the cornea, cartilage, and other load-bearing structures.     

基于复合左右手传输线结构的新型微带天线

基于复合左右手传输线结构的零阶谐振理论,提出了一种新型双层结构的微带天线,仿真结果表明该天线具有比单层微带天线更小的尺寸。研究了天线各结构参数对天线特性的影响,并对各参数进行了优化仿真。仿真结果表明该天线具有全向辐射特性,与传统微带天线相比,该天线具有体积小的特点。     

分离式双管板列管换热器的设计与制造

论述了双管板换热器材料选择、管板胀管槽等结构的设计、双管板检漏设计、最佳胀管压力计算等 ,以及双管板制造中内侧管子管板液压强度胀接、外侧管子管板强度焊接、双管板间空腔内和管子管板焊接接头气密性试验的要求