双边剪智能剪切控制功能的研发与应用

在宽厚板项目中,双边剪用来剪切钢板两个纵边,以达到厂家要求的钢板宽度。本文除了介绍宽厚板双边剪的系统配置及功能特点外,主要阐述智能剪切的自动控制。本着降本增效的原则,开发一种新的主传动控制模式,优化双边剪电机剪切程序,在钢板厚度满足设定条件的前提下,固定侧与移动侧各采用一组电机驱动剪刃,并且实现主从电机智能激活切换模式,以满足生产需要。经实践证明,优化后的控制系统不仅提高了生产效率,还实现了节能降耗、安全生产的目的。     

A comparative study between chloride and calcined carbonate hydrotalcites as adsorbents for Cr(VI)

Hydrotalcite-type solids with different metal ions within the layers (M^II = Mg or Zn and M^III = Al and/or Fe) and carbonate or chloride between them have been synthesized. Chloride-LDHs and the solids obtained upon carbonate-LDHs calcination have been evaluated in the adsorptive removal of Cr(VI) from aqueous solutions. All the adsorption tests were carried out at 30 °C following two different stirring conditions: a) using a thermostatic bath with mechanical stirring at a speed of 52 rpm or b) in a sonicator bath under ultrasound waves. It was observed that no significant difference in the amount of adsorbed chromate is produced in both cases but the time spent to reach the equilibrium is much lower when the adsorbent/adsorbate mixture is submitted to ultrasounds. In all experiments L-type adsorption isotherms were obtained. The results show that chloride hydrotalcites are better adsorbents than calcined CO₃-hydrotalcites and in these last ones their adsorption capacity increases with increasing the surface area: MgAlFe > MgAl > MgFe > ZnAl.     

汽车修补涂料色母用分散剂的选用

通过对树脂、颜料、分散剂和混合溶剂的选择和定量,合成了通用色母。用指研法检验色母的分散稳定性,用倾流法或指擦法检验颜料的流动性,介绍了影响色母分散稳定性和颜料流动性的因素和原理,着重讨论了汽车修补涂料色母的单色浆微脂技术中分散剂的复配分散。     

气提式双锥干燥机的开发

介绍了双锥回转真空干燥机的一种改良型机种——气提式双锥干燥机。这种干燥机不但具有原机的优点，并且有效地解决了原机在干燥中易结块成团和大型化困难等问题     

供应链环境下安全的RFID认证方案

供应链环境下RFID安全认证方案不仅要保证各节点的隐私安全,还应该满足供应链管理需求。针对现有方案存在不能同时兼顾两者的不足,提出一种基于"双重签名"的认证方案。标签的认证信息先后采用访问密钥和认证密钥进行双重签名生成,只有同时具备这两个密钥才能识别标签身份。该方案既可以实现标签在供应链内的安全传递,又能方便供应链的管理。分析表明,该方案较现有方案优势明显。     

基于ENVI软件的遥感影像内插方法偏差改正

ENVI是由遥感领域的科学家采用交互式数据语言IDL(Interactive Data Language)开发的一套功能强大的遥感图像处理软件,其能够快速、便捷、准确地从遥感影像中提取所需的信息。为了对影像进行更好的分析和处理,ENVI提供了一套基础的影像内插方法用于对影像进行插值处理。然而,由于理论上的缺陷,其采用的插值方法存在一定的偏差,从而导致后续的影像处理工作中引入了人为的误差影响。因此基于ENVI软件所用的影像内插方法,从理论入手指出其不足之处并对其模型进行改正。通过实验证明,改正后的内插方法能够获得更为准确的插值影像,从而为下一步的处理提供更为准确的数据结果。     

ELECTROKINETIC EFFECTS: CARBONIC ANHYDRASE AND CO2 ELECTRODE DYNAMICS

It is well known that the dynamic response rate of the Severinghaus-type CO₂ electrode is improved significantly in some cases by addition of the enzyme carbonic anhydrase to the electrode assembly. Hysteresis in the response rate also is reduced. Experimental data and modelling results indicate that catalysis of the CO₂ hydration reaction in the bulk of the bicarbonate layer (the Nernst film) is not responsible for the improved response behavior, Evidence is presented to show that catalysis in the electrostatic double layer region at the glass electrode surface is a possible explanation. This proposed phenomenon may have widespread implications for the optimal design of analytical devices, commercial processes involving electrochemical phenomena, and may also provide insight into electrobiologi-cal processes.     

Catalytic combustion of trichloroethene over Ru/Al2O3: Reaction mechanism and kinetic study

The performance of 0.5% Ru/Al₂O₃ for the deep oxidation of trichloroethene (1000–2500 ppmV, WHSV = 55 h⁻¹) in air was studied in this work. Experiments were carried out both at dry and wet (20,000 ppmV of H₂O) conditions. Catalytic performance was studied in terms of activity and selectivity for the different reaction products (CO₂, HCl, Cl₂, C₂Cl₄, CCl₄ and CHCl₃). Both the activity and the selectivity for total combustion are higher than other catalysts suggested in the literature for this process (especially Pd and Pt).The main organic by-products are CCl₄ and CHCl₃, whereas in all the other catalysts tested in the literature, tetrachloroethene is the main organic by-product. This fact suggests that the mechanism of the combustion reaction, involving a double-bond scission, is essentially specific for this catalyst.Kinetic data was fit to a pseudo-first order kinetic expression, providing fairly good fit.     

二维直线电机平台的双神经网络前馈解耦控制

针对二维直线电机系统中的直线电机本身存在的非线性以及XY两轴之间互相影响产生的耦合对控制精度的影响,提出了一种基于前馈结构的双神经网络解耦控制方法.根据二维直线电机两轴间的耦合结构和前馈控制结构,对应搭建了双神经网络模型,设计一种双神经网络的解耦控制策略,以消除二维直线电机两轴间的非线性强耦合对系统控制精度的影响.仿真结果表明:提出的双神经网络前馈解耦控制方法的有效性,并在起始阶段的跟踪方面表现出良好的性能.     

Suspension force control of bearingless permanent magnet slice motor based on flux linkage identification

The control accuracy and dynamic performance of suspension force are confined in the traditional bearingless permanent magnet slice motor (BPMSM) control strategies because the suspension force control is indirectly achieved by adopting a closed loop of displacement only. Besides, the phase information in suspension force control relies on accurate measurement of rotor position, making the control system more complex. In this paper, a new suspension force control strategy with displacement and radial suspension force double closed loops is proposed, the flux linkage of motor windings is identified based on voltage–current model and the flexibility of motor control can be improved greatly. Simulation and experimental results show that the proposed suspension force control strategy is effective to realize the stable operation of the BPMSM.