单纯形法中枢轴元素选取准则的改进

通过对线性规划的单纯形法的基变换的分析和认识,改进了确定枢轴元素的方法,使单纯形法的收敛速度得到了提高。并利用新的入基变量准则和与之相适应的单纯形作业法给出了例证。     

集合式电容器一段元件非全并联的保护公式浅析

根据集合式并联电容器内部一段元件非全并联的接线方法,从电路原理上,推导了这种接线方式的开口三角电压保护的整定公式,供工程设计中参考应用。     

集合式电容器一段元件非全并联的保护公式浅析

根据集合式并联电容器内部一段元件非全并联的接线方法，从电路原理上，推导了这种接线方式的开口三角电压保护的整定公式，供工程设计中参考应用。     

基于小波分析和有限元法的高维结构优化

结构优化问题的全局最优解一般位于可行域的边界面上,本文利用有限元法来对复杂结构进行分析,借助小 波分析采寻找可行域边界面上的离散点,从而得出高维结构优化问题的全局最优解。     

基于疲劳理论的汽车空气悬架结构件的弯曲强度计算

针对某种型号客车的空气悬架，应用ANSYS软件对弹簧支架进行了有限元分析，计算了弹簧支架的应力、变形特性，在此基础上计算了弹簧支架的疲劳强度。     

快速探测的坐标测量机动态误差计算分析

快速探测是提高坐标测量机工作效率的有效手段，同时还必须要保证原有的测量精度。采用有限元分析方法（FEM）对快速探测过程中由惯性力和驱动力产生的动态误差进行了预测，分析结果是合理的，为后继的动态误差补偿工作打下了良好的基础。     

线性方程组的消元和多维几何的投影

对多维几何中的正投影、次投影给出一个新的统一的定义，并在此概念下，对线性方程组的消元赋予新的几何解释。     

Frequency response analysis of cylindrical shells conveying fluid using finite element method

A finite element vibration analysis of thin-watled cylindrical shells conveying fluid with uniform velocity is presented The dynamic behavior of thin-walled shell is based on the Sanders’ theory and the fluid in cyhndrical shell is considered as inviscid and incompressible so that it satisfies the Laplace’s equation A beam-like shell element is used to reduce the number of degrees-of-freedom by restricting to the circumferential modes of cylindrical shell An estimation of frequency response function of the pipe considering of the coupled effects of the internal fluid is presented A dynamic coupling condition of the interface between the fluid and the structure is used The effective thickness of fluid according to circumferential modes is also discussed The influence of fluid velocity on the frequency response function is illustrated and discussed The results by this method are compared with published lesults and those by commercial tools     

压力容器的结构优化设计及其具体实现

基于有限元分析程序和iSIGHT软件平台，对一薄壁压力容器进行了结构优化设计，介绍了具体的程序集成方法和自动寻优过程，得到了优化的确定性设计方案。考虑设计变量的随机性质，考察了确定性设计方案的可靠性。为了提高设计方案的可靠性，进行了一系列的6σ稳健设计，探讨了设计方案的最优性与稳健性之间的辨证关系。     

FLOW STRESS DATA FOR FINITE ELEMENT SIMULATION IN METAL CUTTING: A PROGRESS REPORT ON MADAMS

To obtain reliable results from Finite Element (FE) simulation of machining processes, it is necessary to have as input the properties of the workpiece and tool materials as well as the characteristics of the tool/chip interface. These input parameters include physical and thermal data, friction and heat transfer, and most importantly the flow stress of the workpiece material under high strain, strain rate and temperature conditions that exist during the process. This paper presents a brief review of FE simulation of machining processes, a review of the approaches used to determine the flow stress at high deformation rate, and the examples of different constitutive equations used to represent such flow stress data. A material property database (MADAMS) has been developed and provides useful information to conduct simulations of machining processes. The main objectives of the material database are to assist researchers in areas of machining analysis and material modeling and to promote collaboration between various international research groups.