装饰用梅花形黄铜管拉伸成型工艺研究

通过对梅花形黄铜管一次拉伸成型的实验 ,研究了管坯的规格、管坯的状态、延伸系数、拉伸方式、工艺润滑及拉伸速度等工艺因素对梅花黄铜管凸筋高度充填的影响规律 ,这些结论对实际生产有一定的指导意义。     

基于计算机仿真分析的拉深工艺参数优化

汽车前照灯矩形反光镜是典型的非轴对称曲面深杯件，本文采用计算机仿真技术分析了其成形过程，并分别对毛坯形状，凹模圆角，压力力等工艺参数进行了优化设计，使成形质量大大提高。     

连续式拉拔机传动凸轮参数优化设计

根据凸轮机构在冶金设备连续拉拔机上作为运动和动力传动的应用 ,研究分析了拉拔机凸轮在设计制造等方面要达到的要求 ,运用优化方法确定了连续拉拔机的凸轮曲线参数 ,并附有计算实例。     

A new thermomechanical model of cutting applied to turning operations. Part II. Parametric study

In Part I of this work, Molinari and Moufki [Int. J. Mach. Tools Manufact., this issue], an analytical model of three-dimensional cutting is developed for turning processes. To analyse the influences of cutting edge geometry on the chip formation process, global effects such as the chip flow direction and the cutting forces, and local effects such as the temperature distribution and the surface contact at the rake face have been investigated. In order to accede to local parameters, the engaged part in cutting of the rounded nose is decomposed into a set of cutting edge elements. Thus each elementary chip, produced by a straight cutting edge element, is obtained from an oblique cutting process defined by the corresponding undeformed chip section and the local cutting angles. The present approach takes into account the fact that for each cutting edge element the local chip flow is imposed by the global chip movement. The material characteristics such as strain rate sensitivity, strain hardening and thermal softening, the thermomechanical coupling and the inertia effects are considered in the modelling. A detailed parametric study is provided in this paper in order to analyse the effects of cutting speed, depth of cut, feed, nose radius and cutting angles on cutting forces, global chip flow direction and temperature distribution at the rake face. The influence of friction at the tool–chip interface is also discussed.     

Nacl—Bacl2—Srcl2三元熔盐相图的计算

本文运用作者提出的从三个对应的二元系的热力学性质预示三元溶液的热力学性质的新对称几何模型,推导得到三元溶液中三个组元的偏摩尔热力学性质的数学表达式。进而将这一结果应用于NaCl-BaCl_2-SrCl_2三元熔盐相图的计算中,得到此三元系的液相析出面及若干等温截面。计算所得结果与实测结果偏差小于5℃,说明此模型在一些熔盐体系中有较好的适用性。     

Simulation of ultrasonic-vibration drawing using the finite element method (FEM)

In ultrasonic-vibration drawing, wires are drawn while ultrasonic vibration is applied to a drawing die. Prior studies provide experimental proof that ultrasonic-vibration drawing reduces drawing resistance, improves lubrication and prevents wire breakage. In the future, ultrasonic-vibration drawing is expected to contribute to the drawing of difficult-to-draw materials and operations, such as shaped wires, ultrafine wires, and the wire drawing operation in semidry or dry condition. However, a detailed analysis and understanding of the mechanism of improvement is not possible on the basis of conventional experimental observations because the ultrasonic-vibration processing phenomenon occurs at high speed. Therefore, we attempted to understand the processing mechanism of ultrasonic-vibration drawing using the finite element method (FEM). ABAQUS was used for the FEM. Drawing force and stress–strain distributions in drawn wires were analyzed. From these studies, we quantitatively clarified the mechanism of improved drawing characteristics, such as decreased drawing force.     

Computing Minimum Area Homologies

Calculating and categorizing the similarity of curves is a fundamental problem which has generated much recent interest. However, to date there are no implementations of these algorithms for curves on surfaces with provable guarantees on the quality of the measure. In this paper, we present a similarity measure for any two cycles that are homologous, where we calculate the minimum area of any homology (or connected bounding chain) between the two cycles. The minimum area homology exists for broader classes of cycles than previous measures which are based on homotopy. It is also much easier to compute than previously defined measures, yielding an efficient implementation that is based on linear algebra tools. We demonstrate our algorithm on a range of inputs, showing examples which highlight the feasibility of this similarity measure.     

双球面投影几何可量测全景模型的构建

针对全景影像难以提供空间度量的问题,提出一种基于双球面投影几何的可量测立体全景模型构建方法.该方法依据球面全景投影关系与多视几何原理,采用对应变换与本质变换求取旋转及平移参数,并推导出双球面核线约束;在此基础上,建立起双球面投影几何的立体全景模型,解决了球面全景的量测问题.实验结果表明,文中方法可使全景影像在真实呈现户外场景的同时,提供满足一定应用需求的量测分析功能.     

基于信息几何的图像去噪

提出一种基于信息几何的图像去噪方法,与传统的欧氏空间中去噪方法不同,基于信息几何的图像去噪方法是在流形上利用两点间的测地线距离的大小来衡量图像中两像素点之间的相似性。流形中的点是通过图像中某区域构建的高斯模型,模型间的测地线距离表示两图像区域平均灰度强度和细节丰富程度的差别。这样将区域的平均灰度强度和细节丰富程度的差别作为像素点间的相似性,能够更加准确地衡量像素点间相似性的差异。实验表明,该算法提高了图像去噪效果,能够很好地保持图像细节。     

An introduction to the Information Display Measurement Standard 1, the first display measurement standard from the International Committee for Display Metrology

On June 1, 2012, the Information Display Measurement Standard version 1 was released. This is the first standard from the worldwide standard group, the International Committee for Display Metrology, a standards committee within SID, and it culminates several years worth of development from many contributors at various levels. It has 26 top‐level chapters and a total over 450 sections of all parts, including over 200 measurement sections and 8 appendices that cover 133 topics of display metrology, tutorials, technical discussions, and references. Herein is an overview of the Information Display Measurement Standard version 1, including the structure of the document, tips, tricks, and hidden features, how it is maintained, support material, a breakdown of its contents, and finally, a sampling of four of the over 200 measurements. The standard is available as a free download and can be found on the International Committee for Display Metrology home page — http://www.icdm‐sid.org .