Intermediate order in tetrahedrally coordinated silicon: evidence for chainlike objects

In this report, we describe the nature of intermediate order in silicon as determined by recent measurements on thin films using transmission electron microscopy (TEM) and Raman scattering. The TEM images show in addition to the expected continuous random network (CRN), the presence of highly ordered quasi-one-dimensional “chain-like objects” (CLO's) that are 1–2 nm wide and tens of nm long that meander and show some evidence of cross-linking with each other. The presence of these objects correlate to a Raman feature centered at 490 cm⁻¹ whose width is 35–40 cm⁻¹, and is used to quantify the heterogeneity in terms of the CLO and CRN (=475 cm⁻¹ scattering) concentrations. The 490 and 35 cm⁻¹ values are consistent with bond angle deviations approaching 0°, and thus reinforces an association with the CLOs. We find that in reference quality a-Si:H (made using pure SiH₄), the CLO concentration is about 5 vol%, while in state-of-the-art material using high H₂ levels of dilution during processing, it increases to about 15%. Increased stability of such material to light-soaking is thus not mediated by a direct volumetric replacement of poor with high-quality components. Rather, an important characteristic of intermediate order in silicon is the low-dimensional aspect of its order, which allows it to influence more total volume than which it is itself composed. Consistent with these and other recent findings, we propose a tensegrity model of amorphous silicon.     

激光平网雕刻机设计

研制了用于制作平面网版的激光雕刻机，设计了雕刻机用CO2激光器、光路系统及单片机控制系统，探讨了将图像文件转化为控制命令文件的方法。     

快速二阶BP网络及其在城市用水量预测中的应用

针对BP网络收敛速度慢，易导致局部极小值的缺点，提出一种快速二阶BP网络，并以城市年用水量预测为例，与BP网络对比，结果表明，该方法加快了收敛速度，提出了结果的准确度。     

m,m′-二氨基二苯酮与均苯四酸二酐的微波辐射聚合

研究 m,m′-二氨基二苯酮 (m,m′- DABP)与均苯四酸二酐 (PMDA)的缩聚及亚酰化 ,并运用微波辐射和常规加热两种方式对反应进行了比较。考察了微波辐射时间 (功率 )、单体浓度、单体配比和温度等因素对缩聚物的特性粘数、转化率的影响。用红外光谱对亚酰化度进行了表征 ,并用简并四波混频技术首次测量了该缩聚物的三阶光学非线性极化率系数及其响应时间。实验结果表明 ,微波辐射对提高聚合物的特性粘数和转化率都有显著作用 ;合成的缩聚物具有较大的三阶光学非线性极化率系数 (聚酰亚胺的 χ(3) =1.642× 10 -13 esu)和较快的时间响应 (19ps     

Software for dynamic reconfigurable order picking systems

This paper describes an approach, conceptual framework, and software architecture for dynamic reconfiguration of the order picking system. The research and development project was sponsored by the Material Handling Research Center (MHRC), a National Science Foundation sponsored Cooperative Industry/University Research Center. The storage configuration is assumed to be an in-the-aisle order picking system in which stockkeeping units (SKUs) can occupy variable capacity storage locations and stock-splitting is allowed among zones (clusters). The product mix may include multiple product families with different life cycles, correlated demand within families and commonality of demand across families.     

Fourth-Order Semi-Compact Scheme for Flow Past a Rotating and Translating Cylinder

In the present investigation, the newly developed Higher Order Semi-Compact (HOSC) finite difference scheme has been tested for its capability in capturing the very complex flow phenomenon of unsteady flow past a rotating and translating circular cylinder. The physical problem has been modeled in stream function and vorticity formulation and the obtained governing equations are transformed into curvilinear coordinates using body fitted coordinate system to enable the developed scheme to handle the non-rectangular geometry of the problem. Qualitative and quantitative comparisons have been done at low-rotation parameters and found that the results obtained are in excellent agreement with the existing literature. Then simulations have been carried out at high-rotation parameters and noticed that the HOSC scheme is able to simulate some of the flow features known experimentally but not simulated numerically to the present date.     

Linear Algebra Considerations for the Multi-Threaded Simulation of Mechanical Systems

A solution method suitable for the multi-threaded simulation ofmechanical systems represented in Cartesian coordinates isproposed and analyzed. In a state-space framework for thesolution of the Differential Algebraic Equations (DAE) ofMultibody Dynamics, the position/velocity stabilization and theacceleration computation are based on iterative solvers applied toequivalent reduced problems. The most in-depth computationalaspect analyzed is the preconditioning, i.e., the direct solutionof the reduced systems. Provided a topology index reduction is first applied to the model, the effort for the direct solution of the reduced systems is shown to be of order O(N _J ), where N _J is the number of joints in the model. The recurring theme of thepaper is the central role that the topology of the mechanicalsystem plays in the overall performance of the numericalsimulation. Based on the topology of the model, parallelcomputational threads can be established to start in the equationformulation and continue through the iterative numericalalgorithms employed for the numerical solution. Task schedulingthese parallel threads is expected to redeem real-time performancefor certain classes of complex applications.     

Kinetic Studies of the Thermal Decomposition of C60H2 in Solution

Thermal decomposition of C₆₀H₂ in C₆D₄Cl₂ solution at 236°C for 2 hours was shown to produce hydrogen as a product, the hydrogen production was successfully followed by NMR. In order to further explore the rule of thermal decomposition of C₆₀H₂, the dynamics of decomposition reaction was studied and the results showed this decomposition reaction accorded with first order reaction dynamical equation. The experiment temperature was ranged separately in 459K, 455K, 451K, and 446K.     

Dynamic stiffness vibration analysis using a high‐order beam model

This work presents the derivation of the exact dynamic stiffness matrix for a high‐order beam element. The terms are found directly from the solutions of the differential equations that describe the deformations of the cross‐section according to the high‐order theory, which include cubic variation of the axial displacements over the cross‐section of the beam. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments. Using the dynamic stiffness matrix exact vibration frequencies for beams with various combinations of boundary conditions are tabulated and compared with results from the Bernoulli–Euler and Timoshenko beam models. Copyright © 2003 John Wiley & Sons, Ltd.     

双原子系统中原子非经典特性与光场非经典特性的关联

本文研究了双原子与双模光场相互作用系统中，双原子分崩离析有压缩与双模光场二阶压缩间的对称关系。揭示了原子间关系和光场模间关联的转换特性，并探讨了失谐量，耦和常数对原子非经典特性与光场非经典特性间关联的影响。