二聚炔醇酸性介质缓蚀剂的合成与应用

对二聚炔醇化合物ＤＭＨ的合成、分子结构及缓蚀作用机理进行了论述。因ＤＭＨ化合物具有独特的分子结构，形成了稳定的络合体系及基团的屏蔽效应，增加了缓蚀被膜厚度及缓蚀体系的化学稳定性，实验证实ＤＭＨ是酸性介质中的高效缓蚀剂。     

乙烯二聚制高纯丁烯－1技术经济评价

本文对生产高纯度丁烯－１的Ａｌｐｈａｂｎｔｏｌ工艺进行了技术经济评价，认为该工艺条件简单、反应条件温和，而且投资少，所以很适合事在发展中国家应用。     

Crystallization and phase transformation kinetics of poly(1-butene)/MWCNT nanocomposites

Poly(1-butene)/MWCNT nanocomposites were prepared by simple melt processing technique. Crystallization, crystal-to-crystal phase transformation and spherulitic morphology were studied using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and optical microscopy (OM). The non-isothermal crystallization exhibited higher values of Z_t derived from Avrami theory and lower values of F(T) obtained from Avrami-Ozawa analysis, while the isothermal crystallization revealed a significant increase in crystallization temperatures and lower crystallization half times compared to pristine PB. The observed changes in the crystallization kinetics were ascribed to the enhanced nucleation of PB in the presence of MWCNT. The nucleating activity calculated from the non-isothermal crystallization data revealed that the MWCNTs provide an active surface for the nucleation of PB. The optical micrographs exhibited significantly smaller crystallites with disordered morphology for the nanocomposites compared to the well defined spherulitic morphology for pristine PB. The rate of phase transformation from kinetically favored tetragonal to thermodynamically stable hexagonal form was noticeably enhanced as evidenced by the reduction in the half time for phase transformation from 58 h to 25 h for PB reinforced with 7% MWCNT.     

基于FPGA的TDM over IP的设计

设计一种TDM over IP的技术系统。该系统用FPGA将E1数据包通过串并转换到千兆以太网数据包,经IP网传输到终端设备,再通过并串转换将以太网数据包转换成E1数据包完成传输。经过软件和硬件测试验证了此系统在千兆以太网上传输的可行性,系统没有出现误码,固有输出抖动是0.55UI,最大峰值抖动指标均满足ITU-G.823标准要求。     

一种消除阶梯效应的图像分解新模型

针对TV-L1分解模型在进行图像分解时所得到的结构部分有阶梯效应的问题,本文提出一种改进的图像分解模型即GJTV-L1模型。该模型首先得到结构部分的切向量场,由切向量场可得到结构部分的法向量场,然后拟合法向量场得到重构图像,即结构部分。通过仿真实验,验证了GJTV-L1模型和算法的合理性及有效性。     

RADIOIMMUNOTOXICOLOGICAL EFFECT OF ENRICHED URANIUM ON CENTRAL AND PERIPHERAL IMMUNE CELLS AND THE PROTECTIVE ACTION OF IL－1 AND IL－2

ＲＡＤＩＯＩＭＭＵＮＯＴＯＸＩＣＯＬＯＧＩＣＡＬＥＦＦＥＣＴＯＦＥＮＲＩＣＨＥＤＵＲＡＮＩＵＭＯＮＣＥＮＴＲＡＬＡＮＤＰＥＲＩＰＨＥＲＡＬＩＭＭＵＮＥＣＥＬＬＳＡＮＤＴＨＥＰＲＯＴＥＣＴＩＶＥＡＣＴＩＯＮＯＦＩＬ－１ＡＮＤＩＬ－２￥ＺｈｕＳｈｏｕｐｅ...     

Hollow Pd/MOF Nanosphere with Double Shells as Multifunctional Catalyst for Hydrogenation Reaction

A new type of hollow nanostructure featured double metal‐organic frameworks shells with metal nanoparticles (MNPs) is designed and fabricated by the methods of ship in a bottle and bottle around the ship. The nanostructure material, hereinafter denoted as Void@HKUST‐1/Pd@ZIF‐8, is confirmed by the analyses of photograph, transmission electron microscopy, scanning electron microscopy, powder X‐ray diffraction, inductively coupled plasma, and N₂ sorption. It possesses various multifunctionally structural characteristics such as hollow cavity which can improve mass transfer, the adjacent of the inner HKUST‐1 shell to the void which enables the matrix of the shell to host and well disperse MNPs, and an outer ZIF‐8 shell which acts as protective layer against the leaching of MNPs and a sieve to guarantee molecular‐size selectivity. This makes the material eligible candidates for the heterogeneous catalyst. As a proof of concept, the liquid‐phase hydrogenation of olefins with different molecular sizes as a model reaction is employed. It demonstrates the efficient catalytic activity and size‐selectivity of Void@HKUST‐1/Pd@ZIF‐8.     

Metal microparticle – Polymer composites as printable,bio/ecoresorbable conductive inks

Biologically and environmentally resorbable electronic devices support application possibilities that cannot be addressed with conventional technologies. This paper presents highly conductive, water-soluble composites that can be printed to form contacts, interconnects, antennas, and other important features that are essential to nearly all systems of this type. An optimized material formulation involves in situ polymerization to yield a polyanhydride containing a dispersion of molybdenum microparticles at appropriate concentrations. Comparisons of essential physical and electrical properties of these materials to those of composites formed with other polymers and other metal microparticles reveal the relevant considerations. Various functional demonstrations of screen-printed test structures and devices illustrate the suitability of these conductive inks for use in water-soluble electronic devices. A key advantage of the material introduced here compared to alternatives is its ability to maintain conductance over significant periods of time while immersed in relevant aqueous solutions. Studies involving live animal models establish the biocompatibility.     

Effects of Fe concentration on microstructure and corrosion of Mg-6Al-1Zn-xFe alloys for fracturing balls applications

Mg-6Al-1Zn-xFe (x = 0, 1, 3, 5 and 7 wt%) alloys were prepared by powder metallurgy and followed by hot extrusion. Majority of Fe element exists as insoluble particles in the alloys. The as-extruded alloys showed higher degradable rates but less stable mechanical properties than as-annealed alloys. Corrosion rate of all the alloys increased with increasing Fe concentration, reaching 2.4 mL cm⁻² h^-1. 0.2% yield strength of all the alloys was higher than 150 MPa. In short, Mg-6Al-1Zn-xFe alloys have an attractive combination of corrosion and mechanical properties, which holds a bright future for fracturing balls applications.