伺服元件的生产应用及发展趋势

本文概括地介绍了我国自70年代以来伺服元件的生产发展状况、元件的性能特点和应用情况，并分析了今后发展的趋势。     

棉铃宝高效液相色谱分析方法研究

本法采用同一色谱条件反相高效液相色谱法测定棉铃宝中甲基对硫磷和辛硫磷的含量，方法简单易行，具有较高的精密度和准确度，其回收率分析为甲基对硫磷９９．５９％，辛硫磷１０１．０％。     

Second-law-based thermodynamic analysis of two-stage and mechanical-subcooling refrigeration cycles

Thermodynamic analysis of HFC-134a vapor-compression refrigeration cycles is investigated by both the first and second laws of thermodynamics. Second-law analysis is carried out for both two-stage and mechanical-subcooling refrigeration cycles. The analysis is performed on each of the system components to determine their individual contribution to the overall system irreversible losses. It is found that most of the losses are due to a low compressor efficiency. Irreversibilities of expansion valves and condenser are also significant. In addition, it is shown that the optimum inter-stage pressure for two-stage and mechanical-subcooling refrigeration systems is very close to the saturation pressure corresponding to the arithmetic mean of the refrigerant condensation and evaporation temperatures. These results are compared with the existing practice in the industry. Furthermore, theoretical results of a two-stage refrigeration system performance are also compared with experimental values for a CFC-22 system.     

Impact of uncertainties on estimations of heat pump cycle performance

Sensitivity analysis is used to show how uncertainties in basic factors, such as heat transfer, pressure drop, compressor efficiency, and thermophysical properties, influence the result of heat pump cycle performance estimations. By comparing the results of this analysis with uncertainty levels of estimations and experimental determinations, it is established to what extent improvements in accuracy are needed. The investigation was carried out for several different applications and, as working fluids, both pure substances and non-azeotropic mixtures were examined. It was found that evaporation heat transfer and compressor efficiency are two areas where improvements are needed. It is also shown that estimates using very accurate, substance-specific, equations of state differ from those using more general types by up to 1 % for COP and 2% for capacity.     

有机盐聚合醇氯化钾钻井液的应用

霍尔果斯背斜构造极其复杂,内应力极高,地层倾角大,断层、破碎带多,并存在高低压互层;安集海河组的灰绿色软泥岩水化严重并具有粘弹塑性.该区块重点探井霍003井三开、四开井段选用有机盐聚合醇氯化钾钻井液,同时为保证钻井液在高密度下（2.55 g/cm^3）具有好的流变性,使用活化铁矿粉、活化重晶石加重.应用结果表明,由于采用了强抑制和多元封堵的措施,该钻井液具有良好的流变性和较强的携带能力,钻进中曾携带出重2.8 kg和5.1kg的大掉块;滤失量低,泥饼质量好,封堵能力强,造壁能力强,减轻了井下阻卡程度;有良好的储层保护能力;在室内研究的基础上,经过现场合理使用和维护钻井液,霍003井提高了机械钻速,缩短了钻井周期,井身质量优于邻井.指出在高密度下,未选出适合有机盐聚合醇氯化钾钻井液的稀释剂,钻井液流动性较差.     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

Characterization of hydrogen concentration in Zircaloy-4 using ultrasonic techniques

The relationship between hydrogen concentration precipitated as hydride particles and ultrasonic parameters, such as velocity and attenuation, was examined in Zircaloy-4 samples for potential applications in the Non-Destructive Test Field. Different amounts of hydrogen (up to 517 ppm) were introduced in the samples by gaseous charging. Ultrasonic attenuation measurements were performed with compressive waves at frequencies of 10 and 30 MHz, and propagation velocity measurements were performed at 10 MHz. Ultrasonic velocity showed an approximately linear increase with hydrogen concentration and it could be used as an assessment parameter when the hydrogen level is high enough. Attenuation versus hydrogen concentration has been fitted by a logarithmic equation at 10 MHz. At 30 MHz a fluctuating behavior of the attenuation prevented measurement of the hydrogen concentration.     

排气结构对导叶式旋风管分离性能的影响

通过对比实验测定了不同排气结构下导叶式旋风管的分离效率及压降,同时用智能型五孔球探针测试仪测定了不同排气结构的旋风管内流场分布,结合性能实验与流场测量的结果,研究了排气芯管内径及其结构型式对分离性能的影响,为旋风管结构优化和开发及其分离机理的研究提供了一定的实验基础。     

Oxygen glow discharge experiment to remove deposited layers and to release trapped hydrogen isotopes in HT-7 superconducting tokamak

An experiment to remove re-deposited layers and to release hydrogen using a glow discharge in oxygen (O-GDC) has been performed in the HT-7 superconducting tokamak. In the absence of magnetic fields, the O-GDC wall conditioning had produced rapid, controlled co-deposit removal. Average removal rates, 5.2 × 10²² H-atoms/h, 5.65 × 10²¹ D-atoms/h and 5.53 × 10²² C-atoms/h, respectively, were obtained during 145 min O-GDC experiment in the pressure range 0.5-1.5 Pa. The corresponding removal rate of co-deposited films was ∼1.19 μm/day (26.5 g/day for carbon) based on an area of 12 m². Compared to thermo-oxidation and O-ICR experiment, high pressure O-GDC wall conditioning promoted the oxidation and improved the C and D atoms removal. In the O-GDC experiment, the removal rates of H-atoms and D-atoms as H₂O, HDO and D₂O were higher than that of H₂ and D₂ by factors of about 20 and 50, respectively. During the 145 min O-GDC experiment, about 14.5% O-atoms were converted into carbon oxides and hydroxides, and about 5.37 × 10²² O-atoms were adsorbed on the walls corresponding to a coverage of 4.5 × 10²¹ O/m² on an wall area of 12 m². In a 100 min helium glow discharge (He-GDC) following the O-GDC experiment, 1.53 × 10²² O-atoms, about 28.5% oxygen retained on the walls, were removed. The removal rate of H-atoms in He-GDC cleaning after O-GDC experiment was lower than that in He-GDC cleaning before O-GDC experiment, which indicates that the O-GDC wall conditioning had effectively reduced hydrogen retention on the walls.     

The Role of Acceptance and Job Control in Mental Health, Job Satisfaction, and Work Performance.

Acceptance, the willingness to experience thoughts, feelings, and physiological sensations without having to control them or let them determine one's actions, is a major individual determinant of mental health and behavioral effectiveness in a more recent theory of psychopathology. This 2-wave panel study examined the ability of acceptance also to explain mental health, job satisfaction, and performance in the work domain. The authors hypothesized that acceptance would predict these 3 outcomes 1 year later in a sample of customer service center workers in the United Kingdom (N = 412). Results indicated that acceptance predicted mental health and an objective measure of performance over and above job control, negative affectivity, and locus of control. These beneficial effects of having more job control were enhanced when people had higher levels of acceptance. The authors discuss the theoretical and practical relevance of this individual characteristic to occupational health and performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)