长输管道外防护层的选择与应用

文章介绍了目前国内外长输管道外防护技术的特点和防护层应用的现状,分析了常用防腐蚀材料的防腐蚀性能。指出在山区复杂地形条件下,应考虑环境条件和施工条件,并通过技术经济分析对管道外防腐蚀层进行合理选择。     

皂河抽水站变电所主变保护改造

简要介绍WKT型微机保护装置运行情况、存在的问题及改造方案。根据美国通用电气公司(GE)的SR745微机型变压器管理继电器在皂河抽水站变电所的应用，介绍该装置的主要特点、安装调试中遇到的主要问题及解决方法和运行情况等，并对变压器保护改造进行了有益的探索。     

骑马岭水电站砂石加工系统规划设计

介绍了骑马岭水电站砂石加工系统的料源规划、系统规划设计、系统工艺流程及环保措施。该加工系统采用的典型的二段破碎工艺，对中小型水电站混凝土骨料生产系统的设计具有一定的参考价值。同时，该加工系统在废水处理水回收利用及细砂与石粉回收、防尘、降低噪声，以及固体废弃物处置等方面，均采取了相应的环保措施，以减少其对施工人员和周围环境的影响。     

Preparation of core–shell structured alumina–polyaniline particles and their application for corrosion protection

Polyaniline (PANI) was synthesized by chemical oxidative polymerization of aniline (ANI) in the presence of alumina (Al₂O₃) particles. The polymerization of ANI occurred preferentially on the surfaces of the particles, resulting core–shell structured alumina–polyaniline (Al₂O₃‐PANI) particles. Morphology examination showed that with decreasing of the weight ratio of Al₂O₃/ANI in the reactants, the thickness of the PANI layer increased and changed from an even surface morphology to a particulate morphology. UV–vis and Fourier transformed infrared (FTIR) spectra indicated that there is no chemical interaction between the PANI layer and the Al₂O₃ surfaces. The PANI layer adhered well to the particles and can be used as anticorrosive fillers for polymer coatings. Enhanced corrosion protection performance was achieved for the emeraldine base (EB) form of PANI deposited Al₂O₃ particles (Al₂O₃‐EB) filled epoxy coating on carbon steel in 3.0 wt % aqueous NaCl solution. The particles demonstrate both excellent corrosion protection performance and lower cost, which will be of great importance in practical applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4372–4377, 2006     

Analysis of hazard area associated with hydrogen gas transmission pipelines

Hydrogen is considered to be the most important future energy carrier in many applications reducing significantly greenhouse gas emissions, but the safety issues associated with hydrogen applications need to be investigated and fully understood to be applicable as the carrier. Generally, the locations of hydrogen production and consumption are different. Hydrogen must be transported from the point of production to the point of use. Pipeline delivery is cheaper than all other methods for large quantities of hydrogen. The rupture of a hydrogen pipeline can lead to outcomes that can pose a significant threat to people and property in the immediate vicinity of the failure point. In this work, a simplified equation of hazard analysis is proposed for the pipeline transporting hydrogen, which relates the diameter, the operating pressure and the length of the pipeline to the size of the affected area in the event of a failure of the pipeline. The dominant hazards are thermal radiation from sustained fire and shock pressure from gas cloud explosion. For a transmission pipeline of hydrogen gas, the hazard area from the fire is slightly larger than by the other event. The hazard area is directly proportional to the operating pressure raised to the power one-half, and to the pipeline diameter. This simplified equation to estimate the hazard area will be a useful tool for safety management of hydrogen gas transmission pipelines.     

国外几种脱硫醇工艺技术

硫醇是一种易挥发、有毒、腐蚀活性强的物质，在环保要求越来越严格的今天，必须将原油和凝析气中的硫醇加以脱除，才能达到环保要求。文章介绍了目前世界上采用的几种脱硫醇工艺。     

昆2井优快钻井及油气层保护技术

昆2井是一口位于柴北缘西段的昆特依凹陷潜伏Ⅰ号圈闭上的风险探井,设计井深为5950m。针对柴北缘深探井存在的主要技术难题,制定了昆2井的技术对策。通过对钻井设备的优选、井身结构的优化、钻头及钻具组合的优选、钻井参数及钻井液性能的优化、油气层保护技术的研究与应用,形成了一套适合于柴北缘的优快钻井技术,使昆2井的完钻井深达到5950m。与邻区的深探井平均水平相比,在井深增加888m、大尺寸井眼段更长的前提下,昆2井的钻井、完井周期分别缩短了98.75d、124.2d,钻机月速度增加了317m/台,平均机械钻速增加了0.82m/h。根据“理想充填新理论”,确定了保护油气层的最优复配暂堵方案,利用该方案所配制的钻井液其渗透率恢复值达到了87.5%以上,流变性能良好,滤失量低,对改善泥饼质量、增强井壁稳定性有明显的效果。     

高等级公路边坡防护设计

分析了影响边坡稳定的因素 ,对不同环境条件下采用的不同路基边坡防护类型进行了介绍 ,重点阐述了经济有效的三维固土网垫结合植被护坡的类型 ,指出边坡稳定是保障公路畅通的重要基础     

一种中温C/C复合材料抗氧化涂层的制备及其性能

制备了一种工作温度约1 173 K的C/C复合材料抗氧化复合涂层,它由磷酸盐过渡层和陶瓷相阻挡层构成,通过与单一陶瓷相涂层的对比试验研究了它的抗氧化机理。涂覆有该复合涂层的C/C复合材料试样,在空气中1 173 K时氧化10 h的失重率为11.25％,氧化失重率为9.84×10~(-5)g/(cm~2·min),而且其氧化失重率随氧化时间延长而降低;4 h内经过30次从1 173 K至室温急冷急热循环后,失重率为6.38％,涂层基本完好,说明涂层在温度不超过1 173 K时具有良好的抗氧化性和抗热震性。该种涂层适合于中温下C/C复合材料的抗氧化保护。