Organosoluble and light-colored fluorinated polyimides derived from 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A novel fluorinated bis(ether amine) monomer, 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared through the nucleophilic aromatic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 2,3-dihydroxynaphthalene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. A series of new fluorine-containing polyimides having inherent viscosities of 0.54 to 1.10 dl/g were synthesized from the diamine with various commercially available aromatic dianhydrides using a standard two-stage process with thermal imidization of poly(amic acid) films. These polyimides were highly soluble in a variety of organic solvents, and most of them afforded transparent, light-colored, and tough films with good tensile strengths. These polyimides exhibited glass transition temperatures (T_gs) of 247-300 °C and showed no significant decomposition below 500 °C under either nitrogen or air atmosphere. Except for the polyimide derived from pyromellitic dianhydride, the polyimide films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 400 nm and low b∗ values (a yellowness index) of 10.7-41.9. These polyimides had dielectric constants of 3.09 to 3.65 (1 MHz) and moisture absorptions in the range of 0.2-0.3 wt%.     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

电控平行排列液晶光栅的光衍射特性研究

对电控平行液晶光栅的理论进行了分析,并配以结构原理图。通过对平行排列及90°扭曲排列液晶指向矢的计算,得出液晶盒中相应的折射率、相位差与电压之间的关系图,两者经比较证明平行排列更具适用性,并在实验中观测到了平行排列液晶光栅衍射特性与电压的关系。     

棒状液晶分子相变问题的机械旋转模型研究

综述一种关于棒状液晶材料的分子结构与液晶相的相关关系的研究成果。介绍了有关液晶分子的机械旋转模型。该模型将液晶分子视作一种高速旋转的转子,通过分子参数计算,对液晶材料的相变温度和分子结构之间的关系给出了一种全新的解释。最新研究表明,含氟三苯液晶材料的分子结构中存在slim和fat现象,能够对液晶材料的相变进行合理解释。该模型能够通过简单的模型方法对新型液晶材料的分子设计与合成提供有用的信息。     

导磁不锈钢毛的结构化研究

研制了一种新型的结构化钢毛——胶结钢毛。和传统的普通钢毛相比,胶结钢毛具有很强的结构刚度和很低的钢毛流失量;同时,对高岭土有较高的除铁效率。     

Transport of chromium(VI) through a Cyanex 921‐supported liquid membrane from HCl solutions

The transport of chromium(VI) through a flat‐sheet supported liquid membrane containing Cyanex 921 as a carrier has been investigated. The permeation of the metal is investigated as a function of various experimental variables: hydrodynamic conditions, concentration of chromium(VI) and HCl in the feed phase, carrier concentration and diluent in the membrane and strippant concentration in the stripping phase. The mass transfer coefficient and the thickness of the aqueous boundary layer were calculated from the experimental data. Furthermore, the selectivity of Cyanex 921‐based flat‐sheet supported liquid membrane towards different metal ions and the behaviour of the system against other carriers are presented. Copyright © 2003 Society of Chemical Industry     

Experiments of Fast Learning with High Order Boltzmann Machines

This work reports the results obtained with the application of High Order Boltzmann Machines without hidden units to construct classifiers for some problems that represent different learning paradigms. The Boltzmann Machine weight updating algorithm remains the same even when some of the units can take values in a discrete set or in a continuous interval. The absence of hidden units and the restriction to classification problems allows for the estimation of the connection statistics, without the computational cost involved in the application of simulated annealing. In this setting, the learning process can be sped up several orders of magnitude with no appreciable loss of quality of the results obtained.     

铝对W9Mo3Cr4V高速钢组织和硬度的影响

用Ｘ－射线仪，扫描电镜和透射电镜系统研究了铝对钨钼系高速钢铸态，退火以及淬回火组织的影响，铝含量超过２．０％，淬火组织中出现含析出合金的铁素体组织和晶界屈氏体，导致钢硬的降低。     

粘土作为高放废物处置回填材料的可行性研究

本文以西北粘土为对象,对其压实行为、热传导、膨胀特性,以及吸附和渗透性能进行了初步研究,借以探讨西北粘土在高放废物处置中用作回填材料的可行性。试验表明,以西北粘土为基材,经过适当的热改性和吸附改性,在初始含水量约为9%,于70MPa 下成型,用作高放废物处置中的回填材料是可行的。     

含氚废水水泥固化实验研究

研究用水泥固化处理氚废水,并选择了最佳配方:水与灰的重量比=0.45～0.5,水泥与石膏重量比=5∶1。用IAEA推荐的方法做浸出实验。为了减少水泥固化体中氚的浸出量,实验了几种涂层材料。沥青涂层可将固化体氚的浸出率降低1～2个量级。