高能球磨AL─Cu合金固态合成反应研究

采用扫描电镜、能谱分析、Ｘ射线衍射和示差扫描量热分析研究了具有较大负混合焓的Ａｌ＿ｘＣｕ＿（１－ｘ）对称扩散系合金的高能球磨固态合成反应。高能球磨时组元晶粒细化达纳米级，造成纳米晶界亚互溶，为室温固态合成反应创造了条件，球磨强度对反应进程影响显著，在ｘ＝０．３～０．７范围内仅形成一种金属间化合物。     

基于用户兴趣度的校园网带宽管理策略应用研究

针对校园网出口拥塞问题,提出一种基于行为分析的用户兴趣建模方法,通过用户参与时间来衡量并计算不同种类应用的用户访问兴趣度,在用户兴趣度的基础上结合通道管理技术进行带宽管理策略研究,实现动态带宽管理。实施结果表明,该方法能够有效地提高用户的网络满意度。     

基于.NET架构高校教学资源库系统研究

.NET的架构下的高校教师信息管理的实现,接着讲解.NET的架构下的学生信息管理的实现,最后说明.NET的架构的学生作业管理系统的实现,还介绍了NET的架构的跨校区合作、交流的实现。     

Forest harvesting in rural properties: Risks and worsening to the worker’s health under the ergonomics approach

Through an ergonomic approach, this study aimed to evaluate whether workers involved in forest harvesting activities in rural properties are subject to the development of work-related diseases, as well as their consequences. A cross-sectional study with 267 forest workers in rural properties in the Brazilian Central region was used. The following evaluations were performed for each of the activities (felling, delimbing, tracing, manual extraction and manual loading): physical workload evaluation; biomechanical evaluation; risk of repetitive strain injuries/work-related musculoskeletal disorders; environmental noise and vibration factors, where relevant, and thermal overload through the Wetbulb Globe Temperature index. The results showed that in general the physical workload was very high, exceeding the cardiovascular load limits and adding to the need for work reorganization. All activities exposed workers to serious and imminent risks of developing injuries to the spine and lower limbs. Likewise, in general the risk of the appearance of RSI/WMSDs was very high for all activities evaluated. Such results are due to the combination of organizational work factors and factors of the work environment such as exposure to bad weather, uneven terrain, lifting and handling loads above tolerable limits, excessive noise and thermal overload. All of this allows to conclude that ergonomic risks and workers’ health hazards in forest harvesting in rural properties are latent and very worrying, and that these workers are exposed to a form of labor exploitation that invariably leads to physical and emotional exhaustion and therefore to their decreased labor capacity and useful working life.     

A CALPHAD-type Young's modulus database of Ti-rich Ti–Nb–Zr–Mo system

Accurate Young's modulus is the necessity for the design of biomedical Ti alloys. A combinatorial method of the diffusion couple, nanoindentation, electron probe microanalysis (EPMA), and CALculation of PHAse Diagrams (CALPHAD) techniques has been utilized to construct the Young's modulus database of Ti alloys with various compositions in the present work. Two groups of body-centered cubic (bcc) Ti–Nb–Zr–Mo quaternary diffusion couples annealed at 1273 K for 25 h were experimentally prepared. Subsequently, the composition-dependent mechanical properties in the wide compositional range of Ti-based alloys were obtained by using EPMA and nanoindentation probes. Finally, on the basis of the measured Young's moduli in the present and previous work and the modeling parameters of Young's modulus of Ti–Nb–Zr system, the Young's modulus database of bcc Ti–Nb–Zr–Mo system was established through the CALPHAD approach. The CALPHAD-type database of bcc Ti–Nb–Zr–Mo system can provide the accurate Young's moduli of Ti alloys with wide compositions.     

A new time invariant fuzzy time series forecasting method based on particle swarm optimization

In the analysis of time invariant fuzzy time series, fuzzy logic group relationships tables have been generally preferred for determination of fuzzy logic relationships. The reason of this is that it is not need to perform complex matrix operations when these tables are used. On the other hand, when fuzzy logic group relationships tables are exploited, membership values of fuzzy sets are ignored. Thus, in defiance of fuzzy set theory, fuzzy sets’ elements with the highest membership value are only considered. This situation causes information loss and decrease in the explanation power of the model. To deal with these problems, a novel time invariant fuzzy time series forecasting approach is proposed in this study. In the proposed method, membership values in the fuzzy relationship matrix are computed by using particle swarm optimization technique. The method suggested in this study is the first method proposed in the literature in which particle swarm optimization algorithm is used to determine fuzzy relations. In addition, in order to increase forecasting accuracy and make the proposed approach more systematic, the fuzzy c-means clustering method is used for fuzzification of time series in the proposed method. The proposed method is applied to well-known time series to show the forecasting performance of the method. These time series are also analyzed by using some other forecasting methods available in the literature. Then, the results obtained from the proposed method are compared to those produced by the other methods. It is observed that the proposed method gives the most accurate forecasts.     

Probability densities for conditional statistics in the cubic sensor problem

This paper applies the techniques of Malliavin’s stochastic calculus of variations to Zakai’s equation for the one-dimensional cubic sensor problem in order to study the existence of densities of conditional statistics. Let {X _t} be a Brownian motion observed by a cubic sensor corrupted by white noise, and let denote the unnormalized conditional estimate of φ(X _i ). If φ₁,...,φ _n are linearly independent, and if , it is shown that the probability distribution of admits a density with respect to Lebesgue measure for anyn. This implies that, at any fixed time, the unnormalized conditional density cannot be characterized by a finite set of sufficient statistics. Research supported in part by NSF Grant No. MCS-8301880 and by the Institute for Mathematics and It Applications, Minneapolis, Minnesota.     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Synthesis of tertiary poly(amido-amine)s with amido- and amino-groups randomly arranged along the macromolecular chain

A new synthesis of poly(amido-amine)s from bis (secondary amine)s and acryloyl chloride has been studied, leading to polymers in which the amido- and amino-groups are randomly arranged along the macromolecular chain. A poly(amido-amine) based on piperazine, chosen as the mother compound, has been fully characterized by ¹³C n.m.r. as well as by identification and quantitative evaluation of its hydrolysis products.     

A conservative discontinuous Galerkin scheme for the 2D incompressible Navier–Stokes equations

In this paper we consider a conservative discretization of the two-dimensional incompressible Navier–Stokes equations. We propose an extension of Arakawa’s classical finite difference scheme for fluid flow in the vorticity–stream function formulation to a high order discontinuous Galerkin approximation. In addition, we show numerical simulations that demonstrate the accuracy of the scheme and verify the conservation properties, which are essential for long time integration. Furthermore, we discuss the massively parallel implementation on graphic processing units.