感光乳剂熔化三要素对熔化供料的影响

本文讨论了温度、搅拌和时间三要素对感光乳剂和工艺过程的影响，指出了上述影响的后果和严格过程控制的重要性，提出克服影响的措施。     

Control of the quality of polymer products in continuous reactors: comparison of performance of state estimators with and without updating of parameters

In the paper the control of the product quality in polymerization reactors is analysed in the presence of persistent perturbations (unmodeled disturbances, modeling errors), as met in industrial reactors. The free radical polymerization of methyl-methacrylate in a continuous stirred tank reactor is studied. It is shown that state estimators (Extended Kalman Filters) with constant parameters cannot give offset free performance. Criteria for the selection of a set of parameters to be updated as additional states in the filter and to evaluate their effectiveness in opposing the action of realistic perturbations are given by an analysis of the linearized model of the system. Performance of different types of estimators, including one and two-time scale filters, with and without updating of parameters, is analysed by simulation on the full order process and the predictions made by previous analysis are confirmed. In the most common case of presence of perturbations affecting the energy balance and the concentration of initiator in the reactor, offset free control of the molecular weight of the product can be achieved by means of a filter which is based only on measurements of temperature and conversion and makes an update of two parameters. In the case that also the kinetic model of the polymerization reaction is affected by errors, a two-time scale filter, which makes use also of Molecular Weight values and updates three parameters, becomes necessary to obtain offset free performance.     

Ziegler-Natta烯烃聚合催化剂进展

综述了Ziegler-Natta催化剂在乙烯聚合和丙烯聚合方面的研究开发现状，重点介绍了采用新型二醚化合物作为内给电子体的丙烯聚合催化剂的进展。随着合成树脂向功能化方向发展，开发综合性能优越的新型催化剂及给电子体将是今后的研究方向。     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

LLDPE及其催化剂技术进展

综述了线性密度聚乙烯（LLDPE）研究的最进展情况，特别对乙烯原位聚合工艺和后过渡金属镍、钯催化剂进行了详细的叙述，对我国LLDPE的生产提出了自己的看法。     

Recursive solution of inverse natural convection problems by means of mode reduction

 A recursive method based on the Kalman filtering is developed to solve inverse natural convection problems of estimating the unsteady nonuniform wall heat flux from temperature measurements in the flow. By employing the Karhunen–Loève Galerkin procedure that reduces the Boussinesq equation to a small set of ordinary differential equations, the computational difficulties associated with the Kalman filtering for the partial differential equations are overcome. The present method is assessed through several numerical experiments, and is found to yield satisfactory results. Received 20 January 2001 / Accepted 31 May 2001     

乳化液浓度自动检测配比系统

本文论述了乳化液浓度自动检测配比系统。文章给出了阻容型浓度、液位传感器的原理、结构和测试电路，以及实现乳化液浓度自动检测与自动配比的系统硬件和软件。系统样机通过了型式试验、防爆和工业性试验。研究结构表明，本系统性能优良，达到了煤矿监控产品技术标准，对提高煤机械自动化程度具有重要意义，推广应用前景广阔。     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

Surface tailoring of an ethylene propylene diene elastomeric terpolymer via plasma‐polymerized coating of tetramethyldisiloxane

In the research presented here, we explore the use of a low‐energy plasma to deposit thin silicone polymer films using tetramethyldisiloxane (TMDSO) (H(CH₃)₂? Si? O? Si? (CH₃)₂H) on the surface of an ethylene propylene diene elastomeric terpolymer (EPDM) in order to enhance the surface hydrophobicity, lower the surface energy and improve the degradation/wear characteristics. The processing conditions were varied over a wide range of treatment times and discharge powers to control the physical characteristics, thickness, morphology and chemical structure of the plasma polymer films. Scanning electron microscopy (SEM) shows that pore‐free homogeneous plasma polymer thin films of granular microstructure composed of small grains are formed and that the morphology of the granular structure depends on the plasma processing conditions, such as plasma power and time of deposition. The thicknesses of the coatings were determined using SEM, which confirmed that the thicknesses of the deposited plasma‐polymer films could be precisely controlled by the plasma parameters. The kinetics of plasma‐polymer film deposition were also evaluated. Contact angle measurements of different solvent droplets on the coatings were used to calculate the surface energies of the coatings. These coatings appeared to be hydrophobic and had low surface energies. X‐ray photoelectron spectroscopy (XPS) and photoacoustic Fourier‐transform infrared (PA‐FT‐IR) spectroscopy were used to investigate the detailed chemical structures of the deposited films. The optimum plasma processing conditions to achieve the desired thin plasma polymer coatings are discussed in the light of the chemistry that takes place at the interfaces. Copyright © 2004 Society of Chemical Industry