输气管道投产置换过程气体混合规律研究

目前国内输气管道置换工艺主要依据人工经验进行，存在较大的盲目性，导致天然气管道投产成本较高，安全风险较大，有必要对输气管线安全投产工艺进行科学、系统的研究，实现输气管道的安全、高效、经济投产模式。文章讨论了现有置换工艺中不同的置换方式，认为不加隔离器的置换方法具有置换效率高、费用低以及安全可靠等优点，是一种有前途的新工艺、新方法。同时，为确保置换过程的安全性，针对置换过程中注氮量确定的盲目性问题，采用模拟试验方法，研究了天然气与氮气、氮气与空气混合段在不同流速和背压下长度的变化规律，从而为确定合理的用氮量提供了理论依据。     

Analysis of crack tip plasticity for microstructurally small cracks using crystal plasticity theory

Crack tip plastic zone sizes and crack tip opening displacements (CTOD) for stationary microstructurally small cracks are calculated using the finite element method. To simulate the plastic deformation occurring at the crack tip, a two-dimensional small strain constitutive relationship from single crystal plasticity theory is implemented in the finite element code ANSYS as a user-defined plasticity subroutine. Small cracks are modeled in both single grains and multiple grains, and different crystallographic conditions are considered. The computed plastic zone sizes and CTOD are compared with those found using conventional isotropic plasticity theory, and significant differences are observed.     

A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: I. Kinematics measurements using a digital speckle extensometry

This paper is the first part of a work devoted to the setting-up of a methodology for the mechanical behaviour characterization of rubber-like materials, using a digital speckle extensometer. We present here the experimental approach, specific to large strain measurements. The proposed method is based on in-plane kinematics measurements using an optical extensometer. The whole two-dimensional field of in-plane displacements is obtained by a digital image processing. We discuss then the correlation calculations and how to achieve the optimal subset matching. Next, we specify how to derive the principal stretch ratios, and the accuracy on these components, issued from a subsequent numerical calibration.Finally, we present experimental data dealing with a carbon black, filled natural rubber, issued from uniaxial traction tests, pure shear tests, and tensile tests performed on double-edge notched tensile specimens.     

基于高速摄像的ESPI全场动态特性测量

采用高速摄像与ESPI技术相结合,将运动中的被测物位移随时间变化的状态以序列图像的形式实时记录,并运用图像处理技术,成功地实现了ESPI动态测量。测量了悬臂梁的自由振动过程,获得了悬臂梁的振动周期、振动频率和阻尼系数等动态特性,实验结果与理论计算值相吻合。     

桃林口水库大坝人工监测项目管理软件的开发与应用

介绍了桃林口水库大坝人工监测项目管理软件研制的意义。对软件结构、开发环境、基本计算原理、主要功能进行了详细阐述；并以大坝垂直位移分析为例,详细讲述了回归分析在资料分析中的具体应用。该软件的应用使工程管理水平上了一个新台阶。     

An investigation of crack closure and the propagation of semi-elliptical fatigue cracks in Q1N (HY80) pressure vessel steel

The results of an experimental investigation of the effect of crack closure on the propagation of semi-elliptical fatigue cracks are presented. Load-shedding fatigue threshold tests were carried out at stress ratios of 0.2, 0.35, 0.5 and 0.7. Crack closure was measured at the surface and depth positions using backface strain gauges, near-tip gauges, and a clip gauge. Differences between the surface and depth growth behaviour are explained by considerations of the effects of the transition from plane stress conditions at the surface to plane strain conditions at the depth. The effects of stress ratios are attributed largely to differences in the crack opening displacement, which result in asperities coming into contact to induce roughness-induced crack closure.     

浅谈现浇框架柱施工中部分质量问题的防治措施

通过对现浇框架施工中柱位移错台、柱子主筋偏移、楼板超厚及保护层不足等质量问题进行综合分析，阐述了此问题出现的根本原因，并提出了防范措施。     

Mapping surface temperature in large lakes with MODIS data

Satellite sensor MODIS on two platforms can produce Sea Surface Temperature over certain regions about three to four times per day. Our objective was to test if the MODIS SST product can be applied for lakes whose surface areas are large enough to be observed at the MODIS spatial resolution and to compare the satellite-derived lake surface temperatures with in situ measurements. Surface temperatures for Lakes Vänern and Vättern in Sweden, two of the largest European lakes, are extracted from the MODIS/Terra images for period 2001-2003. The results are analyzed on different quality levels, as all MODIS L2 products are equipped with an additional quality flag. We present temperature development over 2001-2003, and show the capability of the MODIS SST product to couple the known thermodynamical features in the lakes under study, where temperature varies greatly with space and time. These results can complement lake monitoring programs anywhere.     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

改善PZT微位移器线性的一种方法

根据锆钛酸铅压电陶瓷的逆压电效应。设计了以８０３１单片机为核心的压电陶瓷堆微位移器提高了ＰＺＴ的线性，从而满足了在天文自适应系统中所要求的精确微位的应用。