Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends

A fumed hydrophilic nano‐silica‐filled polypropylene (PP) composite was blended with a liquid‐crystalline polymer (LCP; Rodrun LC5000). The preblended polymer blend was extruded through a capillary die; this was followed by a series of rheological and morphological characterizations. The viscosity of the PP matrix increased with the addition of the hydrophilic nano‐silica. At shear rates between 50 and 200 s^?1, the composite displays marked shear‐thinning characteristics. However, the incorporation of LC5000 in the PP composite eliminated the shear‐thinning characteristic, which suggests that LC5000 destroyed the agglomerated nano‐silica network in the PP matrix. Although the viscosity ratio of LCP/PP was reduced after the addition of nano‐silica fillers, the LCP phases existed as droplets and ellipsoids. The nano‐silicas were concentrated in the LC5000 phase, which hindered the formation of LCP fibers when processed at high shear deformation. We carried out surface modification of the hydrophilic nano‐silica to investigate the effect of modified nano‐silica (M‐silica) on the morphology of the PP/LC5000 blend system. Ethanol was successfully grafted onto the nano‐silica surface with a controlled grafting ratio. The viscosity was reduced for PP filled with ethanol‐M‐silica when compared to the system filled with untreated hydrophilic nano‐silica. The LC5000 in the (PP/M‐silica)/LC5000 blend existed mainly in the form of fibrils. At high shear rates (e.g., 3000 s^?1), the LC5000 fibril network was formed at the skin region of the extrudates. The exclusion of nano‐silica in the LC5000 phase and the increased viscosity of the matrix were responsible for the morphological changes of the LCP phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1484–1492, 2003     

Synthesis and thermotropic liquid‐crystalline behavior of novel main‐chain poly(aryl ether ketones)

Novel aromatic poly(ether ketones) containing bulky lateral groups were synthesized via nucleophilic substitution reactions of 4,4′‐biphenol and (4‐chloro‐3‐trifluoromethyl)phenylhydroquinone (CF‐PH) with 1,4‐bis(p‐fluorobenzoyl)benzene. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction, and polarized light microscopy observation. Thermotropic liquid‐crystalline behavior was observed in the copolymers containing 40, 50, 60, and 70 mol % CF‐PH. The crystalline–liquid‐crystalline transition [melting temperature (T_m)] and the liquid‐crystalline–isotropic phase transition appeared in the DSC thermograms, whereas the biphenol‐based homopolymer had only a melting transition. The novel poly(aryl ether ketones) had glass‐transition temperatures that ranged from 143 to 151°C and lower T_m's that ranged from 279 to 291°C, due to the copolymerization. The polymers showed high thermal stability, and some exhibited a large range in mesophase stability. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1347–1350, 2003     

Synthesis of highly crystalline spinel LiMn2O4 by a soft chemical route and its electrochemical performance

Highly crystalline spinel LiMn₂O₄ was successfully synthesized by annealing lithiated MnO₂ at a relative low temperature of 600 °C, in which the lithiated MnO₂ was prepared by chemical lithiation of the electrolytic manganese dioxide (EMD) and LiI. The LiI/MnO₂ ratio and the annealing temperature were optimized to obtain the pure phase LiMn₂O₄. With the LiI/MnO₂ molar ratio of 0.75, and annealing temperature of 600 °C, the resulting compounds showed a high initial discharge capacity of 127 mAh g⁻¹ at a current rate of 40 mAh g⁻¹. Moreover, it exhibited excellent cycling and high rate capability, maintaining 90% of its initial capacity after 100 charge-discharge cycles, at a discharge rate of 5 C, it kept more than 85% of the reversible capacity compared with that of 0.1 C.     

Studies on the synthesis and properties of poly(amide-azomethine)

Homopolymer and copolymer of poly(amide-azomethine) were synthesized from the corresponding diamines and dialdehydes. The polymerization was proceeded in the mixed solvent of o-chlorophenol and m-cresol (1: I by volume) at 0 °C for I S h. The inherent viscosities of the new aromatic poly(amide-azomethine)s are in the range of 0.51 to 2.31 dl/g. These polymers were soluble in sulfuric and formic acid. The TGA results show that no weight loss up to 400 °C under nitrogen atmosphere, which suggests the relatively good thermal stabilities.     

PLLA-PEG-PLLA三嵌段共聚物的合成及性能

以萘钾和聚乙二醇形成大分子引发剂,在超声波震荡下引发L-丙交酯开环共聚,合成出不同EO/LA物质的量比的PLLA-PEG-PLLA三嵌段共聚物。利用FT-IR和1HNMR表征了三嵌段共聚物的结构。通过接触角和吸水率测试表明共聚物的亲水性是随着EO含量的增大而增强。采用DSC和POM研究共聚物的热性能和结晶形貌表明,共聚物各段熔点比各自均聚物低且有一个Tg,由于共聚物中EO/LA物质的量比的不同,表现出某段的单独结晶或两段都不结晶。因此,可通过改变嵌段含量,制备不同性能的材料,扩大聚乳酸的应用范围。     

Enhanced liquid spreading due to porosity

A conceptual pore level model (Chem. Eng. Sci. 57 (2002) 3401) of spreading of liquid over internally wet porous particles is applied to explain reported rector level enhancement in wetting of trickle bed reactor (Ind. Eng. Chem. Res. 36 (1997) 5133). It is confirmed that a symbiotic relationship exists between internal and external wetting of porous particles whereby each enhances the other. Further, it is illustrated that liquid spreading in porous solids is driven more by porosity than by contact angle. A major implication of this phenomena is that liquid will spread more on less wettable (but porous) surfaces in comparison to more wettable (but nonporus) surfaces and a reinterpretation of experiments involving spreading of liquid over porous solids is required. On a large scenario, it is hoped that present exercise will be in important step towards explaining the complex reactor level macro phenomena by simple and conceptual pore level micro models.     

Relationship between processing,microstructure, and mechanical properties of injection molded thermotropic LCP

A commercial thermotropic liquid crystalline polymer (LCP), Vectra A950, was injection molded into rectangular sheets of thickness ranging from 1 to 4 mm. By changing the thickness of the mold, the shear rate experienced by the TLCP melt in the mold could be varied. The 1‐mm test sample was highly anisotropic while that with larger thickness (4 mm) was less anisotropic. X‐ray diffraction profile at various depths for each of the test sample corresponded to the degree in the fiber orientation present in the test samples. The anisotropy can be described macroscopically by measuring the tensile strength and modulus in the longitudinal and transverse direction. The ratio between the longitudinal and transverse property decreases proportionally to the thickness of the test sample. This reduction corresponded to the reduction in the shear field as the thickness of the mold was increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1713–1718, 2003     

物理填加法回收利用泡沫塑料边角废料

介绍了物理填加法回收利用泡沫塑料边角废料,其中重点介绍了用物理填加法回收利用软质泡沫塑料边角废料的生产工艺及设备,并对填加废料与不填加废料生产的经济性进行比较。     

Synthesis and characterization of side‐chain liquid‐crystalline ionomers containing quaternary ammonium salt groups

A series of thermotropic side‐chain liquid‐crystalline ionomers (LCIs) containing 4‐(4‐alkoxybenzyloxy)‐4′‐allyloxybiphenyl (M) as mesogenic units and allyl triethylammonium bromide (ATAB) as nonmesogenic units were synthesized by graft copolymerization upon polymethylhydrosiloxane. The chemical structures of the polymers were confirmed by IR spectroscopy. DSC was used to measure the thermal properties of these polymers. The mesogenic properties were characterized by polarizing optical microscopy, DSC, and X‐ray diffraction. Homopolymers without ionic groups exhibit smectic and nematic mesophases. The nematic mesophases of the ionomers disappear and the mesomorphic temperature ranges decrease with increasing concentration of ionic units. The influence of the alkoxy chain length on clearing temperature (T_c) values of ionomers clearly shows an odd‐even effect, similar to that of other side‐chain liquid‐crystalline polymers. The mesomorphic temperature ranges increase with increasing alkoxy chain length when the number of alkoxy carbon is over 3. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2879–2886, 2003