VAX机分布式电网调度自动化系统的实现

本文介绍作者开发的一个电网调度自动化系统ＥＰＧＣ。首先介绍ＥＰＧＣ的系统结构，然后介绍系统的软件结构，并着重介绍主机软件数据库，以机监视与切换，网络通信子系统的实现方法。最后对系统的安全可靠性进行简要分析。     

轻便型γ能谱测井仪几个关键技术问题的探讨

为研制性能好，功能强，微机化学程度高的轻便型γ能谱测井仪，针对非油气测井工作的井口径小（〈φ６０ｍｍ）井身浅（〈１０００ｍ）等特点，探讨了γ能谱测井仪的轻便化，测量精度，信号传输技术，稳谱技术及微机化等关键技术问题。     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

冷轧厂酸洗机组3号横剪大流量中高压液压系统设计方案探讨

在宝钢２０３０ｍｍ冷轧厂酸洗机组中，为了满足厚规格ＩＦ钢的生产，拟将原有的气动式剪切机改成液压式剪切机。为此，设计了一套中高压大流量的液压系统以满足３号横剪大剪切力（最高达７００ｋＮ）和快速剪切（３秒／次）的需要。由于采用了蓄能器增速回路和二通插装阀控制技术，使该液压系统较传统的剪切机液压系统具有响应速度快、体积小、重量轻、发热少和降低电机能耗等优点。     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

神经网络离散变结构控制的算法及其应用

本文首次将自适应线性神经元（Ａｄａｌｉｎｅ）用于离散变结构控制。以滑模面Ｓ（ｋ）＝０作为Ａｄａｌｉｎｅ元的希望输出，作为Ａｄａｌｉｎｅ元的实际输出，通过ＬＭＳ算法在线调整权值可保证滑态可达条件的满足。应用所提出的控制策略对泵控马达速度伺服系统进行控制，仿真表明控制效果是令人满意的。     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.