The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Polymeric materials

Summary The Polymer Section of the Santa Barbara Workshop on Modeling of Materials is briefly reviewed. Motivation and need for modeling in polymer-based materials are outlined and the recommendations resulting from the workshop reported.     

Using information-systems constructs to study online- and telephone-banking technologies

The research literature has seen a number of studies aimed at understanding customer attitudes towards banking technologies, and thereby providing implications for developmental planning and marketing. However, even though banking technologies have a significant amount of information systems (IS) component to them, there is a paucity of research that considers them from the IS perspective. In this paper, we fill this gap by considering three constructs, namely usefulness, ease of use and usage, that are all rooted in the IS literature. We study user’s perceptions of these constructs, as well as the relationships among them, for both online and telephone banking.     

Electron transport in direct methanol fuel cells

A three-dimensional (3D), two-phase, isothermal model of direct methanol fuel cells (DMFCs) was employed to investigate effects of electron transport through the backing layer and the land in bipolar plates. It was found that the electronic resistance of the backing layer, affected by backing layer electronic conductivity, backing layer thickness and flow channel width, played a relatively important role in determining the current density distribution and cell performance. In order to ignore the electron transport effect on the average current density, the minimum electronic conductivity of the backing layer has to be 1000 S m⁻¹, with the relative error in the average current density less than 5%, under the given conditions.     

集成半导体器件的工作稳定性与频响设计

本文用频响特性与试验研究相结合的方法,对三个微电子产品实例进行模拟,讨论了如何设计补偿元件,防止自激振荡,保证闭环稳定且满足各项性能指标要求的问题。     

Automatically modeling, simulating and explaining physical systems

This paper presents an interactive framework for constructing models from high-level specifications of real physical systems, deriving low-level simulations from the constructed models and then generating explanations of the simulated behavior to help engineers interpret and control the real physical systems. To demonstrate our method, we show an example of modeling river networks, which are eco-environmental engineering systems, to provide a computer-based solution to problems of simulating and controlling concentrations of water quality constituents in river networks[1].     

Uniform modeling of parameter dependent nonlinear systems

This paper addresses the problem of approximating parameter dependent nonlinear systems in a unified framework. This modeling has been presented for the first time in the form of parameter dependent piecewise affine systems. In this model, the matrices and vectors defining piecewise affine systems are affine functions of parameters. Modeling of the system is done based on distinct spaces of state and parameter, and the operating regions are partitioned into the sections that we call ’multiplied simplices’. It is proven that this method of partitioning leads to less complexity of the approximated model compared with the few existing methods for modeling of parameter dependent nonlinear systems. It is also proven that the approximation is continuous for continuous functions and can be arbitrarily close to the original one. Next, the approximation error is calculated for a special class of parameter dependent nonlinear systems. For this class of systems, by solving an optimization problem, the operating regions can be partitioned into the minimum number of hyper-rectangles such that the modeling error does not exceed a specified value. This modeling method can be the first step towards analyzing the parameter dependent nonlinear systems with a uniform method.     

计算机专业CAD课程的深化实践

在现行的社会技术人才的高度需求下,CAD课程的教学任务更显得意义重大。探讨如何提高教学效率．培养学生的技术应用能力、职业实践能力和创新能力,缩短计算机专业学生cAI）技术应用与单位需求的差距而进行相应的有效实用教学。     

Digital Twin Enhanced Dynamic Job-Shop Scheduling

For dynamic scheduling, which is daily decision-making in a job-shop, machine availability prediction, disturbance detection and performance evaluation are always common bottlenecks. Previous research efforts on addressing the bottlenecks primarily emphasize on the analysis of data from the physical job-shop, but with little connection and convergence with its virtual models and simulated data. By introducing digital twin (DT), further convergence between physical and virtual spaces of the job-shop can be achieved, which greatly enables dynamic scheduling. DT fuses both real and simulated data to provide more information for the prediction of machine availability on one hand; and on the other hand, it helps to detect disturbances through comparing the physical machine with its continuously updated digital counterpart in real time, triggering timely rescheduling when needed. It also enables comprehensive performance evaluation for rescheduling using multiple-dimension models, which can describe geometric properties, physics parameters and behaviors of the machines. In the paper, a five-dimension DT for a machine in the job-shop is introduced first, then the DT-based machine availability prediction, disturbance detection and performance evaluation methods are explored. Based on this, a DT-enhanced dynamic scheduling methodology is proposed. A scheduling process of making hydraulic valves in a machining job-shop is taken as a case study to illustrate the effectiveness and advantages of the proposed method.     

Building a right digital twin with model engineering

In recent years, the concept of digital twin (DT) is attracting more and more attention from researchers and engineers. But there is still no consensus on what a right DT is. On one hand, some common models are renamed as DTs. On the other hand, some DTs extremely pursue ‘the same’ as physical objects, which bring unnecessary complexities to them. In this paper, we try to answer two questions from the point of view of model engineering: how to define a right digital twin, and how to build a right digital twin. The concept and related technologies of model engineering are introduced. Some basic principles and a set of metrics for a right DT are given. An evolutionary concurrent modeling method for DT (ECoM4DT) is proposed not only inheriting the theory from classic M&S methods but also highlighting the characteristics of DT compared with traditional models to systemically guide the DT modeling process.