Determination of effectiveness factor of a partial internal wetting catalyst from adsorption measurement

The effect of partial internal wetting of catalyst pellets on apparent reaction kinetics at elevated temperatures and pressures is investigated experimentally and by modeling for benzene hydrogenation. A new method that combines adsorption and chemical reaction is introduced to study the kinetics influenced by capillary condensation of reagents at steady-state conditions. It is shown that the extent of liquid filling in the pellet interior has a critical effect on the global kinetics, and the current state of the catalyst depends on the history. Under certain conditions two steady states of the effectiveness factor exist. Moreover, either a decrease in temperature or increase in total pressure can increase the effectiveness factor. The model exhibits good agreement with experimental results.     

Fluidization with hot compressed water in micro-reactors

In this paper the concept of micro-fluidized beds is introduced. A cylindrical quartz reactor with an internal diameter of only 1 mm is used for process conditions up to and 244 bar. In this way, fast, safe, and inherently cheap experimentation is provided. The process that prompted the present work on miniaturization is gasification of biomass and waste streams in hot compressed water (SCWG). Therefore, water is used as fluidizing agent. Properties of the micro-fluid bed such as the minimum fluidization velocity (U_mf), the minimum bubbling velocity (U_mb), bed expansion, and identification of the fluidization regime are investigated by visual inspection. It is shown that the micro-fluid bed requires a minimum of twelve particles per reactor diameter in order to mimic homogeneous fluidization at large scale. It is not possible to create bubbling fluidization in the cylindrical micro-fluid beds used. Instead, slugging fluidization is observed for aggregative conditions. Conical shaped micro-reactors are proposed for improved simulation of the bubbling regime. Measured values of U_mf and U_mb are compared with predictions of dedicated 2D and 3D discrete particle models (DPM) and (semi)-empirical relations. The agreement between the measurements and the model predictions is good and the model supports the concept and development of micro-fluid beds.     

Measurement and modeling solubility of bioactive coumarin and its derivatives in supercritical carbon dioxide

To design a supercritical fluid extraction process for the separation of bioactive substances from natural products, a quantitative knowledge of phase equilibria between target biosolutes and solvent is necessary. How-ever, mostly no such information is available in literature to date. Thus in the present study, illustratively the solubility of bioactive coumarin and its various derivatives (i.e., hydroxy-, methyl-, and methoxy-derivatives) in supercritical CO₂ were measured at 308.15–328.15 K and 10–30 MPa. Also, the pure physical properties such as normal boiling point, critical constants, acentric factor, molar volume and standard vapor pressure for coumarin and its derivatives were estimated. By these estimated information, the measured solubilities were quantitatively correlated by an approximate lattice equation of state proposed recently by the present authors.     

Analysis of cell aggregation in the culturing of cerebellar granule neurons

We have proposed previously that an increased concentration of growth factor secreted by neurons themselves has a direct effect on survival of the neurons, and thereby cell density serves as a regulator of survival of neurons. In this study, the same idea was used to analyze the aggregation of cerebellar granule neurons in culture experimentally and theoretically. Assuming the transport of growth factor and substrate within an aggregate is by molecular diffusion, the metabolic efficiency of neurons, on the basis of an autocatalytic phenomenon, was increased within an aggregate compared to an identical quantity of dispersed cells. A good agreement in the size of neuronal aggregate between the theoretical prediction and the experimental result was found. This illustrates that growth factors produced by neurons acting in either an autocrine or paracrine manner play an important role during the development of cultured neurons.     

Simultaneous measurement of gas and solid holdups in multiphase systems using ultrasonic technique

Ultrasonic technique has been recently developed to measure dispersed phase holdups in multiphase flows. The experimental results obtained in this work have shown that the fluctuations of the sound speed and attenuation of ultrasound are well-defined functions with solid and gas holdups in liquid-solid and gas-liquid two-phase flows. When both solid particles and gas bubbles are present in a liquid flow, gas bubbles appear to be a dominant factor for the instability of ultrasound signals. These findings lead to a new approach for simultaneous detection of gas and solid holdups in a gas-liquid-solid three-phase flow. In this work, canonical analysis and optimization methods are successfully applied to differentiate the contributions of gas bubbles and solid particles to the ultrasonic signals recorded from three-phase systems. The gas and solid holdups determined by the proposed approach are in a good agreement with the experimental results obtained using differential pressure transducers and conductivity probes.     

Effect of competitive interference on the biosorption of lead(II) by Chlorella vulgaris

Batch experiments were carried out to asses the effect of Cu(II) and Zn(II) on the biosorption of lead(II) ions by non-living Chlorella vulgaris. The uptake of Pb(II) was examined for single, binary and ternary solutions at different initial concentrations and different pH values. The experimental results showed that the uptake increased with increasing pH from 3.0 to an optimum value of 5.0. The biosorption of Pb(II) was found to be adversely affected by the presence of Cu(II) ions, while Zn(II) ions seemed to have negligible effect on the process. The equilibrium data were fitted to four isotherm models: Langmuir, Freundlich, Sips and Dubinin–Radushkevich; the Sips isotherm gave the best fit for the data. Modeling of the controlling mechanisms indicated that both intrinsic kinetics and mass transfer played major roles in controlling the process. A new dimensionless parameter, Ψ, was defined to asses the relative contributions of the two mechanisms to the biosorption of lead(II). Mass transfer seemed to be the dominant mechanism at low initial lead(II) concentrations, while intrinsic kinetics dominates at high concentrations.     

基于层次CPN的OpenFlow建模研究

CPN作为一种形式化方法,得到了广泛的研究与应用,其在网络协议上和工业系统中的应用尤为突出。OpenFlow是一种新的网络交换模型,包含OpenFlow交换机和控制器。文中首先介绍了OpenFlow协议及CPN(Coloured Petri Nets),然后基于层次CPN对OpenFlow网络进行了建模,对每一层的模型都做了详细的说明,充分体现OpenFlow的工作机制。在建模的过程中,详细地考虑了模型中token的选取和变量的定义,使得CPN模型的执行可以描述OpenFlow的动态工作过程。通过CPN工具生成的状态空间对模型的性质进行了简单的分析,证明了它的活性、有界性。最后给出了下一步的研究工作。     

A multiscale model for effective moduli of concrete incorporating ITZ water-cement ratio gradients, aggregate size distributions, and entrapped voids

This paper develops a model for the effective elastic properties of concrete, which is a function of the volume fractions, size distributions, and elastic properties of fine aggregate (FA) and coarse aggregate (FA) and entrapped voids. Furthermore, the model is a function of the overall water-cement ratio and specific gravity of cement. Explicitly modeled are the water-cement ratio gradients through the interfacial transition zone (ITZ), which, in turn, affect the variation of the cement paste elastic properties through the ITZ, while maintaining the total fractions of cement and water consistent with the overall water-cement ratio. The ITZ volume is also conserved.     

Estimating the electrical conductivity of cement paste pore solutions from OH, K and Na concentrations

A proposed method for estimating the electrical conductivity of cement paste pore solution at 25 °C is based on the concentrations of OH⁻, K⁺ and Na⁺. The approach uses an equation that is a function of the solution ionic strength, and requires a single coefficient for each ionic species. To test the method, the conductivity of solutions containing mixtures of potassium hydroxide and sodium hydroxide with molar ratios of 4:1, 2:1 and 1:1, and having ionic strengths varying from 0.15 to 2.00 mol/l were measured in the laboratory and compared to predicted values. The proposed equation predicts the conductivity of the solutions to within 8% over the concentration range investigated. By comparison, the dilute electrolyte assumption that conductivity is linearly proportional to concentration is in error by 36% at 1 mol/l and in error by 55% at 2 mol/l. The significance and utility of the proposed equation is discussed in the context of predicting ionic transport in cement-based systems.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.