Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

中型孔径小梯段露天石方深孔水压爆破

介绍了一种石方开挖新技术－－露天石方深孔水压爆破技术。用试验的方法，通过和常规石方爆破进行类比，从而研究了此项新技术在中型孔径小梯段应用条件下的各种爆破参数，并进行了定性和定量分析，得到了一些初步的结论。     

Brief Overview of Recent Developments on Negative Phase–Velocity Mediums (alias Left–Handed Materials)

This brief overview covers a rapidly occurring development in the area of microwave composite materials: isotropic dielectric–magnetic mediums wherein the phase velocity vector and the time–averaged Poynting vector are oppositely directed. Such materials have also been inappropriately designated as left–handed materials. Ramifications for aberration–free lenses, homogenization approaches, and complex mediums are also presented.     

TORO400E电动铲运机卷缆系统研究

介绍了TORO400E电动铲运机卷缆系统的工作原理及常见故障表现,按照国家标准,对卷缆系统的压力进行调整,计算出阻尼油缸压力调整值。在实际使用中运用,取得了良好的效果。     

Dynamic analysis of the NPP pressure sensor system

The aim of the work was to develop on-line methods of control and diagnostics of pressure sensors at a NPP. The analysis was carried out along two lines:

1. i) The detection system including the sensor itself was modeled theoretically to obtain and study its transfer function, and to establish correspondence between the spectral characteristics of the pressure signal.

2. ii) The numerical processing of the signal using the AR technique to reconstruct the transfer function and evaluate the system's response, to a step impulse, as well as the spectral analysis. The hydraulic model presented indicate that the spectral lines observed at 10 Hz are due to longitu-dinal oscillations of water in the system branches, while the response time of the detection system is effectively the time of signal retardation in the porous ceramic diaphragms of the δ-cell of the sensor itself.

     

车辆TPMS轮速传感器误差消除方法研究

轮胎压力监测系统能够实时地自动监测行驶中汽车的轮胎气压,对于提高行车安全具有重要的意义。基于轮胎压力监测系统硬件平台,阐述了轮速信号的获取,研究了异点剔除方法,提出了基于弹性BP神经网络分析轮速传感器误差的方法,实现了对轮速信号的修正。仿真和实验结果表明,该轮速传感器误差消除方法的精度可达2×10-4rad,能够显著降低传感器误差,提高轮速信号的获取精度。     

一种新型硅三端负阻器件

提出并研制成一种新型硅三端负阻器件。该器件由一n沟耗尽型MOS管、一横向pnp双极晶体管和一个电阻集成而得。它具有“双负阻”特性和正阻区阻值易于控制等特点。由理论计算出的器件I_c—V_(CB)特性和负阻参数与实验结果符合良好。     

一类负模量Kirchhoff - Carrier方程的解

利用变分方法和反证法研究了一类含有非线性项的Kirchhoff - Carrier方程,证明了当0<λ1时,该方程至少存在一对非平凡解,且当λ≥a λ₁时该方程不存在同号解.     

小型储气罐火灾工况数值模拟分析

以某输气管线气液联动执行机构中的储气罐为例,利用Ansys Fluent软件建立同比例三维模型,模拟火灾工况下,外部热量不断输入,罐内压力和罐体温度随时间的变化情况。利用Aspen Hysys软件模拟计算该小型储气罐在火灾工况下安全泄放所需的最小安全阀口径。结果表明,当钢制储气罐外部发生火灾时,罐体温度和罐内压力急剧升高,在很短的时间内就能达到储气罐坍塌温度和储气罐设计压力;达到钢制储气罐坍塌温度的时间滞后于达到储气罐设计压力的时间;从安全的角度,设置安全阀可安全有效泄放气体,即使储气罐发生坍塌,也有助于降低事故发生的危害程度;确定的安全阀最小口径为0.03 cm²,建议选型的安全阀口径不低于0.05 cm²。